Extension or Additional accommodation for deptt of Physiotherapy at New campus

Amount

Demolishing brick manually or by mechnical means in cement mortar including stacking of serviceable material and disposal of unserviceable material outside the University Campus. All work upto floor V level.

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material outside the University Campus

Demolishing mud phuska in terracing including stacking of serviceable material and disposal of unserviceable material outside the University Campus.

P&L in position specified grade of RCC 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 12.5/20mm nominal size) in superstructure upto floor V level including centering, shuttering (Formwork)but excluding cost of reinforcement in:- Columns, Pillars, Posts & struts, Beams (straight or curved), rib of coffers, lintels, brackets, suspended floors, roofs (any slope), water tank, slabs of coffers, landings, balconies, shelves chajjas, lintels, bands, plain window sills, staircases and spiral staircases, arches, arch ribs, domes, vaults shells, folded plate, staircase steps including waist slab, folded steps etc. Nothing extra shall be paid for any additional height of the formwork. All work upto floor V level.

Providing steel thermo mechanically treated bars conforming to IS:45612000 reinforcement for all RCC work including bending binding and placing in position complete including cost of steel reinforcement and binding with 18-20 gauge, soft drawn concealed steel binding wire complete. All work upto floor V level. (Make Tata Tiscon / Rashtriya Ispat/SAIL)

Brick work with 2nd class bricks of class designation 75 in foundation, plinth and in superstructure in cement mortar 1:6(1 cement: 6 coarse sand). All work upto floor V level.

Half brick masonry with 2nd class bricks of class designation 75 in foundation, plinth and in superstructure in cement mortar1:4 (1 cement: 4 coarse sand). All work upto floor V level.

Extra for providing and placing in position 02 nos 8 mm dia MS bars at every third course of half brick masonary.

Brick Jali with 22.86 cm x 11.43 cm thick alternate layers laid in cement mortar 1:4 (1 cement : 4 sand). All work upto floor V level.

Painting top of roof with bitumen of approved quality at 17 kg per 10 sqm incarnated with a cost of coarse sand at 60 cum per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. With residual type petroleum bitumen of penetration 80/100.

100 mm thick (average) mud phaska of damped brick earth on roof laid to slope consolidated and plastered with 25 mm thick mud mortar with bhusa at 35 kg per cum. of earth and gobri leaping with mix 1:1 ( 1 clay : 1 cowdung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% integral water proofing compound by weight of cement and finished neat.

Supply & laying of 400 micron thick PVC Sheet (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7Kg/sqm) complete in all respects.

Flush Pointing on brick flooring / tile terracing with cement mortar 1:3 (1 cement : 3 fine sand)

Providing angular fillets 75cm x 75 cm cement concrete 1:2:4 (1 cement: 2 sand : 4 crushed aggregate 20 mm nominal size). Incl. finishing with cement mortar 1:3 (1 cement: 3 sand) as per standard design in 75cm x 75 cm deep chase.

Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) over PVC sheet 1mt x 1mt x 400 micron finished with 12mm cement plaster 1:3 ( 1cement : 3 coarse sand) and a coat of neat cement . Rounding the edge and making and finishing the outlet complete.

Providing and laying of water proofing treatment to vertical and horizontal surface of depressed protions of W.C kitchen and like consisting of:- First Layer:- Applying cement slurry @4.4kg/sqm mixed with water proofing compound confirming to IS: 2645 in recommended proportion including rounding of junction of vertical and horizontal surface tape crete or equal. Second layer:- 20 mm thick cemetn plaster (1 cement: 3 coarse sand) mixed with water proofing compound ACRO-1 in recommended proportions including rounding of junctions of vertical and horizontal surface. Third Layer:- Applying blown or residual bitumen applied hot at 1.7 kg per sqm. of area on both horizontal and vertical surfaces of sunken area. Fourth Layer:- 400 micron htick PVC Sheet (overlaps at joints of PVC Sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm on both horizontal and vertical surfaces of sunken area. Perforted PVC pipe along loength of toilet with outlet towards sanitary shaft.

10-15 mm thick cement plaster 1:6 (1cement : 6 fine sand) in single coat on rough/fair side of brick walls (Interior plastering) including making grooves (in between brick masonry and RCC work) scaffoldings etc. complete. All work upto floor V level.

10-15 mm thick cement plaster 1:4 (1cement : 4 fine sand) in single coat on rough/fair side of brick walls (Exterior plastering) including making grooves (in between brick masonry and RCC work wherever required) scaffoldings etc. complete. All work upto floor V level.

6mm cement plaster to ceiling of mix: 1:3 (1 cement : 3 fine sand). All work upto floor V level.

Applying white cement based Putty of average thickness 1mm of approved brand & manufacture on wall surface to give an even finish (JK/Birla)

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall/ ceiling/slopping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture (Make Asian/Nerolac). All work upto floor V level.

Finishing exterior wall with premium acrylic smooth exterior paint (Apex/ Excel) with silicone additives of required shade on new work (two or more coats) applied @ 1.43 litre/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm). All work upto floor V level.

Providing and applying at all floors, heights and locations exterior based texture finish made from natural Granite stone based materials and Bonding agent made from pure acrylic co-polymer emulsion, Broad fungicide and Bonding agent mixed to a recommended quantity of water and applied with a trowels on to the surface, to be finished, in an average uniform coat of 1.5/2mm covering an area of about 0.5 sqm/kg of the mix. Giving a uniform surface texture and applied by trained texture applicators in a single coat. The finish shall be anti fading and non pigmented type with resistance to weathering. The base has to be smooth sand faced cement plaster after duly clearing off any unwanted scratches and undulations by sand papering or using a wire brush before actual application begin complete including cost of all material, labour, machinery, T&P, curing, all leads, lifts and sampling, testing and water arrangements complete as per drawings, requirements, specification and as directed by the Engineer in charge.

Providing and Laying Cement Conc. 1:5:10 (1 cement: 5 coarse sand: 10 graded Brick aggregate 40mm nominal size) and curing complete under flooring. All work up to V level.

Providing and fixing ISI quality white or coloured (as approved) ceramic glazed tiles on wall conforming to IS: 13753 of minimum thickness 5mm of approved make (Johnson/Somany/Kajaria) in colour/shades as approved by the Engineer-in-charge in skirting risers of steps and dados over 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg/ Sqmt including finishing the joints with white cement mixed with pigment to match the shade of the tile complete size 250 x 400mm 300x450 mm/ 300x600 mm in toilets etc.

Providing and fixing of Ist Quality ceramic glazed floor tiles 300x300mm/400x400 mm size (Anti-skid) conforming to IS 13755 (Kajaraia/Johnson/Somany) of any colour as required/approved by the Engineer-in-charge laid on 20mm thick bed of cement mortar 1:4 including grouting the joints with white cement and matching pigment complete. Nothing extra shall be paid for laying tiles where they are require to be cut. All works upto floor V level

Providing and laying Double charged vitrified floor tiles Size of tile 60x60 cm (8mm to 10mm thick) with water absorption less than 0.08% and conforming to IS:15622 of approved make (Kajaria / Johnson/RAK) in colours/shades as approved by the Engineer-in-charge laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.

Providing and fixing 18 mm thick gang saw cut mirror polished (pre moulded and pre polished) machine cut for kitchen platform, vanity counters window sills facias and similar location of required size of approved shade. colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement 4 coarse sand ) with joints treated with white cement mixed with matching pigment epoxy touch ups, including edge moulding rubbing, curing, and Granite polishing to give high gloss finish etc. complete at all levels. Black Granite of any colour and shade as approved by the Engineer-in-charge.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately ) For Fixed portion / Openable Powder coated aluminum (minimum thickness of powder coated 50 microns)

-----do------- For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and allied fittings complete as required including the cost of PVC / neoprene gasket required Powder coated aluminium (minimum thickness of powder coated 50 microns)

Providing and fixing factory made uPVC door frame made of Upvc extruded sections having an overall dimension as below (tolerance + mm), with wall thickness 2.0 mm (+ 0.2mm) corners of the door frame to be jointed with galvanised brackets and stainless steel scrfews, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanised M.S tube of size 19 x 19 mm and 1 mm (+ 0.1mm) wall thickness and 03 nos. stainless steel hinges fixed to the frame complete as per the manufacturers specifications and direction of the Engineer-in-charge. Extruded section profile size 48 x 40 mm

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With glass panes of 5.50 mm thickness (wt not less than 13.50 kg / Sqm)

28mm thick factory made PVC door shutters made of stylesand rails of a uPVC hollow section of size 59 x24 mm and wall thickness 2 mm (+ 0.2mm) with inbult edging on both sides. The styles and rails metred and joint at all the corners by means of M.S galvanized/plastic brackets of size 75 x 220 mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanized M.S tube of size 20 x 20 and 1 mm (+ 0.1mm) wall thickness. The lock rail made up of 'H' Section, a uPVC hollow section of size 100 x 24 mm and 2 mm (+ 0.2mm) wall thickness, fixed to the shutter styles by means of plastic/galvanized M.S 'U' Cleats. The Shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having overall thickness of 20 mm and 1mm (+ 0.1mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S Rod and fastened with nuts and washers complete as per manufacturer's specifications and direction of the Engineer-in-charge (for W.C and bathrooms door shutters).

Providing and fixing double action hydraulic floor spring with brass cover plate of approved brand and manufacture IS: 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover minimum 1.25 mm thickness

Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer (having superior brand) embossed on the body, door weight upto 36-80 kg and door width 700-1000 mm with double speed adjustment with necessary accessories and screws etc. complete. Hardwyn make (Eddy) or equivalent

Providing and fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coated not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete, best make of approved quality.

Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. Twin rubber stopper

Providing and fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. Tower bolts 250x10 mm

--------do--------- Tower bolts 200x10 mm

-------do---------- Tower bolts 150x10mm

Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. Handles 125 mm

----------do--------- Handles 100 mm

Providing and fixing aluminum casement windows fastner of required length for aluminum windows with necessary screws etc. complete. Powder coated minimum thickness 50 micron aluminum.

SANITARY WORK P&F white vitreous china pedestal type (European type/wash down type) water closet pan (Parry ware/Hindware/Cera) including providing & fixing solid plastic seat with lid (white colour) and providing and fixing low level PVC flushing cistern with manually controlled device (handle lever) conf. to IS:7231 (Parryware /Hindware/Cera) 10 Liter Capacity-White in colour fitted with unplasticised PVC connection pipe 15mm nominal bore, brass end union 45 to 60cm length, G.I Inlet connection for flush pipe connecting WC pan, C.P brass angle valve (02 Nos.) 15mm nominal bore (Parko / Chilli / Jainco), C.P Jet (heavy duty) with PVC connection pipe to be fixed with European Type W.C complete job. Nothing extra shall be paid.

Providing and fixing of White vitreous China wash basin (Make Hindware/Parryware/Cera) of size 550x400/550x450 mm with 15mm C.P brass pillar cock ( Parko / Chilli / Jainco), 32mm C.P brass waste coupling , PVC Waste pipe, C.P brass angle valve ( Parko / Chilli / Jainco), Unplasticised PVC connection pipe 15mm nominal bore, brass end union 45 to 60cm length complete job including making good the wall and floor in all respects.

P&F of White vitreous China pedestal for washbasins completely recessed at the back for the reception of pipes & fittings (Make Parryware/Hindware/Cera).

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of sizes 580 x 380 x 350mm / 590 x 375 x 390mm and respectively with CP brass angle valve ( Parko / Chilli / Jainco) M.S brackets, standard flush pipes, and C.P brass spreaders with brass unions and Clamps complete job including painting of fittings and brackets, cutting and making good the walls and floors wherever required.

Providing and fixing white vitreous china urinal partition of size 755x165x365mm (Make Hindware/Parryware/Cera)

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved quality) Complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete.

Providing and fixing PVC pipe of approved make (Make Supreme/Prince/Finolex) 4 kg/sqcm pressure including jointing with seal adhesive leaving 10mm gap for thermal expansion including cost of necessary clamps embedded in cement concrete, cutting the wall and making good the same in case of rain water pipes/cost of earthwork in excavation in trenches in case of Sewer line. 150 mm dia

---------------do---------------- 110 mm dia

----------------do-------------- 80 mm dia

Providing and fixing PVC plain bend (Make Supreme/Prince /Finolex) 110 mm

Providing and fixing PVC single equal plain junction of approved make of required degree with access door, insertion rubber washer 3mm thick, bolts & nuts complete (Make Supreme/Prince/Finolex) 110 x110x110mm

-----------do------------ 80 x80x80mm

Providing and fixing PVC Plain Tee without access door of required degree with access door, insertion rubber washer 3mm thick, bolts & nuts complete.(Make Supreme/Prince/Finolex) 110 x110x110mm

-----------do------------- 80 x80x80mm

Providing and fixing PVC Collar: (Make Supreme/Prince/Finolex) 110mm

P&F PVC Cowl/Terminal Guard (Make Supreme/Prince/Finolex) 110 mm

Providing and fixing PVC bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: (Make Supreme/Prince/Finolex) 110 mm

Providing and fixing PVC Floor Trap of self cleansing design with screwed down or hinged grating (including the cost of floor trap) with or without vent arm complete including encasing the floor trap with cement concrete (1:2:4), 150 mm thick all around. 100mm inlet and 100 mm outlet

--------------do--------- 100mm inlet and 75 mm outlet

Cutting holes in brick masonry walls/RCC roof for passing pipes (C.I/G.I/P.V.C) upto 150mm dia and making good the same with Brick masonry 1:4/RCC 1:1½:3 as required.

Providing and fixing PTMT soap dish of standard size and quality (Prayag make).

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality colour and make (Prayag Make) 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190 gms.

Providing and fixing G.I. pipes (medium grades) complete with G.I. fitting and clamps, including cutting chases and making good the walls etc. wherever required (Concealed / Exposed). 15mm dia nominal bore

----------do------------- 25mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality complete. with handle 25mm dia nominal bore

-----------do---------- 20 mm dia nominal bore

Providing and placing on terrace (at all floors levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank [Sintex/Star having valid ISI license].

Providing and fixing C.P. brass bib cock Parko / Chilli / Jainco make complete in all respects.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931. 15 mm nominal bore (Parko / Chilli / Cera)

Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded crushed stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:- With F.P.S. bricks with class designation 75 Inside size 90x80cm and 60cm deep including fixing Angle iron frame 65x65x6mm with hold fast and covered with precast RCC Manhole cover 1:2:4 of required size including cost of reinforcement as required.

Providing and fixing G.I tank nipple 1"/2" for connection complete in all respects.

P&F of PTMT Angle valve for motor 15mm nominal bore of approved quality (Prayag Make)

Providing anf fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball (Prayag make) 15mm nominal bore, 105mm long, weighing not less than 138 gms.

P&F C.P Grating of 100mm dia

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (Make Parko/Chilly/Cera)

P/F of C.P shower rose with 15/20 mm inlet including rod with necessary plugs and screws.100 mm dia

P/F of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nom. bore.

Proviiding and fixing C.P Brass toilet paper holder

Cleaning of sewer lines from manhole to manhole to make the sewer lines fully functional includingdisposal of mulba outside the University Campus.

Earth work in excavation in all kinds of soil in bulk evacuation and foundation trenches pits including stacking soil neatly away from the edges, filling back by the sides of foundations and in plinth & retaining walls in 150mm thick layers, ramming, watering and consolidation complete including disposal of Surplus earth outside University Campus.

Providing and laying cement concrete 1:4:8 ( 1 cement: 4 coarse sand: 8 grade crushed stone aggregate 40mm nominal sizes) in foundation and under flooring including machine mixing, finishing, consolidation, curing and form work complete.

Providing and laying 50mm thick cement concrete 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement slurry.

15 mm cement plaster on brick wall with cement mortar 1:4 (1 cement : 4 coarse sand) including applying a floating coat of cement slurry and finished neat. All work upto floor V level.

msprannathco