Supply of Building Material at different sites situated at Kanpur (U.P.)

Amount

Approved brand cement confirming to IS : 1489- 1991 (Part-I) packed in plastic HDEP bags. in 50 Kg.

Supply of different sizes of M.S. Tor steel ISI marked as per confirming IS: 1786 - 1985.

Coarse sand F.M. 1.50 to 3.60. (Hameerpur Quary)

Fine sand FM - 1.25

20 mm nominal size graded stone grit (Kabrai Quary)

Class 150 bricks

Vitrified floor tiles (600 x 600 mm size)

Ceramic glazed Floor tiles (300 x 300 mm size)

Ceramic glazed wall tiles ( 300 x 450 mm size)

18 mm thick granite - Z Black

20 mm thick kota stone

Flush door shutter (I.S.I Mark, 35 mm thick) with Venineer on both faces)

Flush door shutter (I.S.I Mark, 25 mm thick) with Venineer on both faces)

40 mm Nominal size stone ballast (Kabrai Quary)

Structural Steel of different size and shape ISI Marked

Mosquito proof galvanised jali.

4 mm thick glass panes in cut size.

Enamal Paint (Asian, Berger or Equivalent)

Premium Acrylic Extrerior Paint (Asian, Berger or Equivalent)

Oil Bound Distemper (Asian, Berger or Equivalent)

Wall Putty (Birla or Equivalent)

S.S. Door bolt I.S.I. Marked (250 x 16 mm)

S.S. Tower bolt I.S.I. Marked

S.S. Handles I.S.I Marked 150 mm

Cinder Light weighted

80 mm thick Rubber Moulded Interlocking C.C. Pavour Zig-zag block of M-30 Grade

In Gray Base

In Red Base

White Vitreous china for European type W.C. pan with white plastic seat and lid. Make-Cera, Hindware or Equivelant

White Vitreous Indian Type W.C. pan of size 580x440 mm with integral type foot rests and P Trap. Make-Cera, Hindware or Equivelant

Flushing Cistern PVC 10 Ltr. Capacity (Low Level With Fitting accessories and flush pipe.

Vitreous china flat back wash basin 630x450 mm of approved quality & make. (Nirali or equivalent)

15mm CP brass pillar cock

CP brass waste 32mm

CI bracket for wash basin and sinks.

Stainless steel kitchen sink with drain board bowl size 510 x 1040 mm depth 250mm (are equivalent)

Semi rigid PV.C. waste pipe for sink and wash basin 32mm dia with length not less than 700mm.

Semi rigid PV.C. waste pipe for sink and wash basin 40mm dia with length not less than 700mm.

Mirror of superior make glass 60x45cm of approved quality as per direction of E/I.

PTMT towel rail 600 mm long of approved make.

PTMT Liquid Soap Container of 400ml capacity of approved make.

100mm dia centrifugally cast iron S & S pipe of approved quality & make.

75mm dia centrifugally cast iron S & S pipe of approved quality & make.

M.S. holder bat clamps For 100 mm dia pipe

M.S. holder bat clamps For 75 mm dia pipe

C.P Brass JALI 100 mm

Cast iron coller 100 mm dia

Cast iron coller 75 mm dia

Cast iron S & S sanitary bend. 100 mm dia

Cast iron S & S sanitary bend. 75 mm dia

C.I. bend of required degree with access door 100 mm

C.I. bend of required degree with access door 75 mm

Cast iron terminal guard. 100 mm

Cast iron terminal guard. 75 mm

U-PVC (working pressure 6kg/sqm) single socketed pipe 110mm dia of approved quality & make.

U-PVC (working pressure 6kg/sqm) single socketed pipe 160mm dia of approved quality & make.

Brass gate valve 20 mm

Brass gate valve 25 mm

H.P. or L.P. ball valve with polythene floats: 15 mm dia

Polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement of approved Brand.

G.I. Pipe 15 mm nominal bore B-Class of approved Brand

C.P. Brass Bib cock 15 mm of ISI Marked (Short Body) of approved Brand.

C.P. Brass Bib cock 15 mm of ISI Marked (Long Body) of approved Brand.

C.P. Brass Angle valve 15 mm dia of ISI Marked of approved Brand.

C.P. Brass Two way 15 mm dia of ISI Marked of approved Brand.

Jet assembaly for Europian Type WC seat of approved Brand.

C.PVC Pipe 20 mm outer Dia

C.PVC Pipe 25 mm outer Dia

C.PVC Pipe 32 mm outer Dia

C.PVC Pipe 40 mm outer Dia

C.PVC Pipe 50 mm outer Dia

Glass strip 32 mm wide 2.8 to 3.7 mm thick

M/S APEX CONSTRUCTION COMPANY

M/S SHAKTI CONSTRUCTION COMPANY