BIRED/07/e-NIQ (1st call) of 2021-2022

Amount

CIVIL WORK

P. No-15, Item No-8

Brick work with 1st class bricks in cement mortar (1:6)

In Super-structure : First floor

In Super-structure : Second floor

P. No-16, Item No-16

125 thick brick work in 1st class bricks in cement mortar (1:4)

In first floor

P. No-24, Item No-4

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if

In First floor

in second floor

P. No-43/44, Item No-40

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc

Other than SAIL/ TATA/RINL

In First floor

in Second floor

P. No-42, Item No-36

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and

Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work

In First floor

in second floor

P. No-189, Item No-1

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and

With 1:4 cement mortar, Ceilings

10 mm thick [First Floor]

10 mm thick [Second Floor]

With 1:6 cement mortar

20 mm thick [First Floor] ;Inside

20 mm thick [Second Floor] ;Inside

15 mm thick [First Floor]

15 mm thick [Second Floor]

P. No- 66, Item No-36

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm

With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of

Deep Colour & White

in ground floor; 35 mm thik

P. No-204, Item No-5

Rendering the Surface of wall and ceilling with white cement based wall putty of approved make and brand (1.5mm Thik)

P. No-196, Item No-11

Synthietic distemper to interior wall ,ceilling with a coat of solvent based interior grade acrylic primer (as per manufactuarar specification) including cleaning and smooting of surface. 2 coats.

P. No-116, Item No-16

Providing & fixing factory made door frame (single rebate) made of single piece extruded solid pvc profile with homogenous fine.

P. No-130, Item No-21[b]

Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc

Factory made Single piece extruded PVC profiles door shutter of both side laminated wood grains decorative Finish:

P. No-63, Item No-34

Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick

Area of each Granite slab upto 0.60 Square meter

P. No-64, Item No-35

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones

With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint

Area of each tile above 0.09 Sq.

Coloured decorative

Walls of Toilet

Floor

With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91

Area of each tile above 0.09 Sq.

Other than Coloured decorative

P. No-114, Item No-1

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact

(e) Sal : Local 1st floor

P. No-140, Item No-4

frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete

(a) 40mm X 6mm, 200mm Length

P. No-117, Item No-1

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing

(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.

Gamar Wood.

P. No-140, Item No-5

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.

(i) 75mm. X 47mm. X 1.70mm.

(vii) 100mm. X 58mm. X 1.90mm.

P. No-141, Item No-10

i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.

(c) 300mm long.

P. No-141, Item No-8

Iron socket bolt of approved quality fitted and fixed complete.

(e) 300mm long x 10mm dia bolt.

(e) 150mm long x 10mm dia bolt.

P. No-145, Item No-30

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:

With continuous plate base (Hexagonal/ Round rod)

150 mm grip x 12 mm dia rod.

100 mm grip x 10 mm dia rod.

P. No-104, Item No-13

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in

(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

P. No-107, Item No-20[b][ii]

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and

(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the

M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats

P. No-205, Item No-1

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall

P. No-45, Item No-8[b]

Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in

Roof Area

P. No-42, Item No-35

Extra rate for adding Polyester Fibre anti shrinkage material@ 0.25% by weight of cement [or as per

P. No-139, Item No-12[i]

Supplying fitting and fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of

(i) 25mm x 25mm x 2.7mm x 2.7mm.

P. No-176, Item No-7

(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including

(b) Priming one coat on Timber or plasteredl surface with synthetic oil bound primer of approved quality including

P. No-176, Item No-8

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering

With super gloss (hi-gloss)

(iv) Two coats (with any shade except white)

(b) On steel or other metal surface :

(b) On timber ofr plastered surface :

P. No-196, Item No-8

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to

In First floor

In First floor

In Second floor

P. No-173, Item No-19

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per

Premium 100% Acrylic Emulsion

In First floor

In First floor

In Second floor

Sanitary & Plumbing Works

P. No-79, Item No-2[a]

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.

With 'P' trap

P. No-81, Item No-10

Supplying, fitting and fixing closet seat of approved make with lid and CP hinges, rubber, buffer and brass screws complete

E.W.C., Bestolite (solid type) white

P. No-80, Item No-6

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.

(i)590 mm X 390 mm X 380 mm

P. No-41, Item No-2

supply , fitting and fixing white vitreous chaina based quality approved make wash bashin with C ,I. brackets on 75 mm x 75 mm wooden blocks , all districts of west bengal descrioion of item item no blocks, C.P. waste fittings of 32 mm dia , one approved quality brass C.P. piller clock of 15 mm dia , C.P . chain with rubber plug of 30 mm dia , apporoved quality PVC waste pipe with C.P nut 32 mm dia 900 mm.....as per GS.

550 mm x 400 mm

P. No-36, Item No-2

supply fittings and fixing 10 ltr PVC low down cistern conforming to IS specification …as per GS

P. No-6, Item No-7

supply fitting and fixing bib cock or stop cock

a]Chromium plated Bib Cock Short body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand)

b]PTMT (Polytetra Bib Cock / Stop Cock(Prayag or equivalent) 15 mm

c]Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand).

P. No-81, Item No-15

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges

(i) 450 mm X 300 mm

P. No-12, Item No-19(i)

Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials.

For Exposed Work ; 25 mm dia

40 mm dia

For Concealed Work ;15 mm dia

20 mm dia

P. No-68, Item No-23

Supply of UPVC pipes (B Type) and fittings conforming to IS: 13592 – 1992; 110 mm diameter

Double socketed 3.0 m length

Door Bend (T.S.)

Vent cowl

Pipe clip

P. No-43, Item No-9

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.

600 mm long

P. No-37, Item No-6

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer

(d) 1000 litre capacity

P. No-37, Item No-10

Labour for hoisting plastic water storage tank.

(ii) Above 1500 litre upto 5000 litre capacity.

Upto 2nd story from G.L.

P. No-39, Item No-13

Labour for punching hole in plastic water storage tank upto 50 mm dia.

P. No-4, Item No-4

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).

40 mm dia

25 mm dia

P. No-43, Item No-10

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.

750 mm long

P. No-82, Item No-18

Supplying, fitting and fixing soap holder.

PTMT (Prayag or equivalent)

P. No-82, Item No-22

Supplying, fitting and fixing towel rail with two brackets

CP over brass

25 mm diameter and 750 mm long

P. No-108, Item No-12

Supply of long screw (150 mm long) of TATA make with sockets (TATA

25 mm dia

P. No-81, Item No-11

Supplying, fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.

i) Polythene Flush Pipe

P. No-64, Item No-10

Supplying, fitting and fixing C.I. round grating

P. No-87, Item No-1

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials

With Pakur variety (Other than SAIL/TATA/RINL).

ELECTRICAL INSTALLATION WORK

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] 9 Mtr. [ 4(d) / E-25 ]

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works

On Board [ 3 (a) / E- 25 ]

Cutting Channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipe of following diameter as per GS.

13 mm dia 3 mm thick [ 2(a)/ E- 2 ]

19 mm dia 3 mm thick [ 3 (a)/ E- 2 ]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe as per GS.

3x(1.5 sqmm) [ 1(b) / E-9 ]

2x(2.5 sqmm)+1x(1.5 sqmm) [ 1(s) / E-9 ]

2x(4 sqmm)+1x (2.5 sqmm) [ 1(v) / E- 9 ]

2x(10 sqmm)+1x(6 sqmm) [ 1(b1) /E- 9 ]

4x(16 sqmm)+2x(10 sqmm) [ 1(g1) /E- 9 ]

4x(35 sqmm)+2x(25 sqmm) [ NS ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

1.5sqmm [ NS ]

2.5sqmm [9 (i)/F-5]

4 sqmm [9 (ii)/F-5]

6 sqmm [9 (iii)/F-5]

10sqmm [9 (iv)/F-5]

16sqmm [9 (v)/F-5]

25sqmm [NS]

35sqmm [NS]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes(in mm ) flushed in wall as per GS

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws

SUB-HEAD 2--BDB,PDB,VTPN ETC

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS.

2+16 Way[ Legrand ] [ 13 / D- 9 ]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand )

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS( Make - Legrand )

12 Way ( Up to 250 A ) [15 / D- 11 ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand ]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS [ Make - Legrand ].

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall as per GS.( Make -L&T ).

SUB-HEAD 3-- PLUGS & SOCKETS

Supply & Fixing 240 V, 3 nos. 6 A & 1 no. 16 A, 3 pin Modular type plug socket with 3 nos. 6A & 1 no. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 2 nos 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 2 nos 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc [ 9(b)/E-18]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall as per GS.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [17/E-19 ]

S&F AC machine timer for one no. machine febricated with double door 8Way SPNDB as per L&T Cat no-LTSDO8N) i) 240 V, 32A DP MCB of breaking capacity 10KA & ''C'' Charecteristic (L&T)-1no ii) 22A TP power contactor with 220 coil voltage (L&T, Cat no-MNX22-2P, CS90238)-1 No. iii) Digital timer switch (L&T, cat no-Crono 67DDTO)-1no [NS] and necessary wire connection

SUB-HEAD 4 -FIXING OF LIGHT FITTINGS

Fixing only pendent light fitting complete with lamp, shade and 24/0.2 mm (1.5 sqmm) flexible copper wire incl. S&F pendent holder[12/C-2]

Fixing only single/twin LED light fitting complete with all accessories Directly on wall/ceiling as per GS. [14(d)/C-2]

Fixing only single/twin fluorescent light fitting in the ceiling fixed with “L” type MS clamp as per GS [ 17/C-2 ]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit as per GS

SUB-HEAD 5 -SUPPLY OF LIGHT FITTINGS

Supply of 4 Ft. LED single/twin Batten tube set complete with all accessories & Lamps having following Model / Cat No.( Make -Crompton/Philips)

Single fitting ( Model No.- IGP161 LTT8-20 / as similar model)

Double fitting ( Model No.- IGP162 LTT8-20/as similar model )

S & F 9W LED bulb ( PHILIPS) at existing batten point at toilet or other

SUB-HEAD 6 -- FIXING OF FANS

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification as per GS.[ 29/D-14 ]

Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board as per GS

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS

Fixing only exhaust fan after making holes in wall as per GS (12") [ 28(b)/C-4 ]

Supply & Fixing louver shutter ( Aluminum)on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS (12") [ 32(b)/D-14 ]

SUB-HEAD 7 -- SUPPLY OF FANS

Supply of ceiling fans complete with all accessories having the following Model / Cat No. ( Make -Crompton Greaves /Usha) a. 1200 mm Sweep ( Aura/striker galaxy ) [NS]

Supply of Exhaust fans complete with all accessories having the following Model / Cat No. ( Make -EPC ) 12" ( 300mm ) Speed 1370 RPM [NS]

Supply of 4 core 95 sq. mm. multy stranded Armoured alluminium conductor cable PVC/XLPE insulated & Sheathed cables for Working Voltage up to 1100 Volts of following sizes [Make- Havells / Polycab/ Gloster / Currency / KEI / As per choice of EIC]

Note:- Labour welfare Cess @ 1% and GST @ 12% on Bill amount will be deduct.

MS K. K. GHOSH and CO.

MODERN ENGINEERING ENTERPRISE