Construction of Boys hostel at Udhamur Campus of Jammu University

Amount

Earth work in foundation, trenches, bulk excavation, including stacking soil neatly away from the edges, filling back by the sides of foundations, in plinth in 150mm thick layers, ramming, watering and consolidation complete. Including disposal of Surplus Earth within University Campus as directed by the Engineer In charge. Nothing extra on account of lead or lift shall be paid by the department. In All kinds of soil/ordinary rock/Hard Rock (Blasting Prohibited)

Providing and laying Cement concrete 1:5:10 (1cement: 5 coarse sand: 10 graded crushed stone aggregate 40mm nominal size) in foundation and under flooring including machine mixing, consolidation, curing and Centering, shuttering/form work complete.

Providing and laying in position reinforced cement concrete 1:1.5:3 (1 cement 1.5 coarse sand 3 graded crushed stone aggregate 20 nominal size including cost of centering, shuttering complete. All work upto plinth level.

Providing and laying 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 20 mm nominal size under flooring.

P & L in position reinforcement cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5/20 mm nominal size) including the cost of centering shuttering upto Floor V Level but excluding cost of reinforcement in:- Columns, walls including attached pilasters buttresses etc. Beams (straight or curved), rib of coffers, lintels, brackets, suspended floors, roofs (any slope), water tank, slabs of coffers, landings, balconies, shelves chajjas, vertical and horizontal fins individually or forming box louvers band, facias and eaves boards lintels, bands plain window cills, staircases and spiral staircases, arches, arch ribs, domes, vaults shells, folded plate, staircase steps including waist slab, folded steps etc. All work above plinth level upto floor V level. Nothing extra shall be paid for additional height of form work.

Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) including cost of machine mixing, curing, centering shuttering / form work complete.

Providing steel thermo mechanically treated bars conforming to IS:45612000 reinforcement for all RCC work including bending binding and placing in position complete including cost of steel reinforcement and binding with 18-20 gauge, soft drawn concealed steel binding wire complete. All work upto floor V level. (Make Tata Tiscon / Rashtriya Ispat/SAIL)

Brick work with F.P.S brick of class designation 75 in foundation, plinth and in super structure in cement mortar 1:6 mix (1 cement 6 fine sand) including cost of scaffolding, curing etc complete. All work upto floor V level.

Brick work with F.P.S brick of class designation 75 in foundation, plinth and in super structure in cement mortar 1:4 mix (1 cement :4 fine sand) including cost of scaffolding, curing etc complete. All work upto floor V level.

Half brick masonry with brick of class designation 75 in foundation, Plinth & Superstructure in Cement mortar 1:4(1 cement : 4 sand) including cost of scaffolding, curing etc complete . All work upto floor V level.

Extra for providing and placing in position 2 Nos. 6mm dia MS bars at every third course of half brick masonry (with FPS bricks)

Making plinth protection with 50mm thick cement concrete 1:3:6 (1 cement : 3 sand :6 crushed stone aggregate 20 mm nominal size) laid over 75 min bed of dry brick aggregate 40 mm nominal size, rammed ,consolidated and grouted with fine sand including making groves as required ,necessary form work, curing etc complete.

Painting top of roofs with bitumen of approved quality at 17kg per 10sqm impregnated with a coat of course sand at 60 cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. With residual type petroleum bitumen of penetration 80/100.

100 mm thick (average mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg/Cum of earth gobri leaping with mix 1:1 (1 clay 1 cow dung) and covered with flat FPS brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement 3 sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat.

Pointing on tile brick work with cement mortar 1:3 (1 cement; 3 fine sand) Flush pointing.

Providing angular fillets 75mm x 75 mm cement concrete 1:2:4 (1 cement : 2 course sand : 4 crushed stone aggregate 20 mm nominal size)

Making khurras 60x60cm with average minimum thickness of5cm cement concrete 1:2:3 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and laying water proofing treatment to vertical and horizontal surface of depressed portions of W.C kitchen and like consisting of: First Layer: Applying cement slurry @4.4kg/Sqm mixed with water proofing compound confirming to IS: 2645 in recommended proportion s including rounding of junction of vertical and horizontal surface. Second Layer: 20 mm thick cement plaster (1 cement 3 coarse sand) mixed with water proofing compound ACRO -1 in recommended proportions including rounding of junctions of vertical and horizontal surface. Third layer: Applying blown or/residual bitumen applied hot at 1.7 kg per sqm. Of area on both horizontal and vertical surfaces of sunken area Fourth Layer: 400 micron thick PVC sheet (Overlaps at joints of PVC sheet should be 100mm wide and pasted to each other with bitumen @ 1.7 kg/sqm on both horizontal and vertical surfaces of sunken area. Perforated PVC pipe along length of toilet with outlet towards sanitary shaft.

10-15mm thick cement plaster 1:6 (1 cement: 6 coarse sand) in single coat on brick walls for interior/exterior plastering including making the grooves in plaster between brick masonry and RCC Work (Horizontal / Vertical) and cost of form work /scaffolding as required complete. All work upto floor V level.

6mm-10mm cement plaster 1:3 (1 cement :3 fine Sand) to ceiling and other RCC exposed surface where required as per the instructions of the Engineer-in-charge including cost of centering, shuttering, scaffolding etc. as required complete. All work upto floor V level.

Distempering (two or more coats) with oil bound washable distemper of approved brand (Asian/Nerolac) and manufacture and of required shade on undecorated wall/ ceiling/slopping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture. All work upto floor V level.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture on wall surface to give an even finish (Make JK/Birla)

French spirit polishing (two or more coats) on new wood works including a coat of wood filler.

Finishing wall with premium acrylic smooth exterior paint (Apex/ Excel) with silicone additives of required shade on new work (two or more coats) applied @ 1.43 litre/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm) (All exterior sides of building)

Providing and applying at all floors, heights and locations exterior based texture finish made from natural Granite stone based materials and Bonding agent made from pure acrylic co-polymer emulsion, Broad fungicide and Bonding agent mixed to a recommended quantity of water and applied with a trowels on to the surface, to be finished, in an average uniform coat of 1.5/2mm covering an area of about 0.5 sqm/kg of the mix. Giving a uniform surface texture and applied by trained texture applicators in a single coat. The finish shall be anti fading and non pigmented type with resistance to weathering. The base has to be smooth sand faced cement plaster after duly clearing off any unwanted scratches and undulations by sand papering or using a wire brush before actual application begin complete including cost of all material, labour, machinery, T&P, curing, all leads, lifts and sampling, testing and water arrangements complete as per drawings, requirements, specification and as directed by the Engineer in charge.

Supplying and filling in plinth with fine sand under floors including watering, ramming consolidating and dressing complete.

Providing and Laying Cement Concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded Brick aggregate 40mm nominal size) including machine mixing, consolidation, curing etc. complete. All work upto floor V level.

Providing and laying double charged vitrified floor tiles of size 60x60 cm, 8-10mm thick with water absorption less than 0.08% and conforming to IS: 15622 of approved make (Kajaria / Johnson/ Nitco) in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement mixed with pigment of matching shade complete. All work upto floor V level.

Providing and fixing Ist quality coloured (as approved) ceramic glazed tiles on wall conforming to IS: 13753 of minimum thickness 5mm of approved make NITCO/Kajaria/Johnson and colour shades as required in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg/ Sqmt including finishing the joints with Synthetic Grout mixed with pigment to match the shade of the tile complete size 300x450 mm / 300x600 mm. All work upto floor V level.

Providing and laying Udaipur Green Marble stone Flooring / skirting with 16mm (average) thick marble stone over 20mm average thick base of cement mortar 1:4 (mix) (1 cement : 4 coarse sand) laid and jointed with cement slurry joints finished with synthetic grout mixed with pigment of matching shade including rubbing, edge moulding, granite polishing to give high gloss finish complete. Nothing extra shall be paid on account of wastage. All work upto floor V level.

Providing and laying in floors/skirting Ist quality ceramic glazed tiles (Antiskid) of approved make (Johnson/ Kajaria/Nitco) floor tiles of different sizes 300x300mm/400x400mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colors and shades, laid on 20mm thick cement mortar 1:4 ( 1 Cement : 4 coarse sand) including grouting the joints with synthetic grout mixed with matching pigments, curing etc. complete. All work upto floor V level.

Chequerred precast cement concrete tiles 22 mm thick (NTC Make) in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade using 50% white cement 50% ordinary cement.

Providing and fixing 18 mm thick gang saw cut mirror polished (pre moulded and pre polished) machine cut for kitchen platform, vanity counters window sills facias and similar location of required size of approved shade. colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement 4 coarse sand) with joints treated with white cement mixed with matching pigment epoxy touch ups, including edge moulding rubbing, curing, and Granite polishing to give high gloss finish etc. Jet Black Granite . All work upto floor V level.

Providing and fixing of water proof ply of approved quality (Green /Orchid /Century) including cost of labour nut bolts for fixing of frames fevicol, nails etc, filling the surface with chalk putty mixed with paint, sand papering to prepare the surface even and smooth applying priming coat of wood primer and then (two or more coats) with synthetic enamel paint of approved brand and manufacture (Asian/Nerolac). Nothing extra shall be paid for any wastage (for manufacture of cupboard) complete upto all floor levels and height as per drawings and strictly as per direction by the Architect / Engineer in Charge. 6mm Thick ply

-----------do------------- 19mm Thick ply

Providing and fixing of 1.0mm thick Sunmica of approved quality & make (Formica, Green, Bloom) including cost of labour fevicol nails etc as required nothing extra shall be paid for any wastage. All work upto floor V level.

Providing wood work in frames of doors, windows and clerestory windows and other frames, wrought framed and fixed in position (Second Class Teak Wood) (For Cupboards and internal doors, chowkhats except toilet doors). Including two or more coats of French Spirit polishing of approved brand and manufacture including filling complete.

Providing 40mm x 5mm flat iron hold fast 30cm long including fixing to frame with 10mm diameter bolt, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size).

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately ) a) For Fixed portion / Openable Powder coated aluminum (minimum thickness of powder coated 50 microns)

-----------do--------------- b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and allied fittings complete as required including the cost of PVC / neoprene gasket required Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing wood work in frames of doors, windows and clerestory windows and other similar work fixed in position. Salwood inlcuding applying a priming coat of wood primer and then two or more coats of synthetic enamal paint of approved brand and manufacture. (Asian/Nerolac)

Providing and fixing factory made UPVC door frame made of UPVC extruded section having an overall dimension as below (tolerance±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the doorframe to be Jointed with galvanized brackets and stainless steel screws, joints metred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge. Extruded section profile size 48x40mm

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item) : With glass panes of 5.50 mm thickness (wt not less than 13.75 kg / Sqm)

30 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanized /plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanized M.S. tube of size 25 x 20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size100 x 30 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanized M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S Rod and fastened with nuts and washers complete as per manufacturer's specifications and directions of the Engineer-in-charge. (For WC Bathroom, door shutters).

Providing and fixing in position M.S. door made out of M.S. Angle chowkhats 40x40x6mm, shutter frame of M.S. Angle 35x35x5mm with M.S. flat horizontal & diagonal braces of sections 35x5mm, M.S. sheet cover 16 gauge M.S. hinges and all other fittings accessories like M.S. tower bolts, handles and sliding bolts etc required for the completion of the items including applying a coat of metal primer and then two or more coats with synthetic enamel paint of approved brand and manufacture.

Providing and fixing in position 35mm thick factory manufactured pre-laminated flush door shutters of decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply duly pre-laminated with 1mm thick laminates of approved quality colour, texture and brands on both faces of shutters complete including cost of ISI marked stainless steel butt hinges with necessary screws etc complete duly fixed in position as per drawings, requirements, specifications and as per directions of Engineer in charge including applying priming coat of wood primer and then (Two or more coats) with synthetic enamel paint of approved brand and manufacture on all exposed wood surface as required.

Providing and fixing 35mm thick (IInd Class Deodar Wood) wire gauze shutters using galvanized MS wire gauze of average width for aperture 1.4mm with wire of dia 0.63mm for doors, windows and clerestory windows including applying a priming coat of wood primer and then two or more coats of synthetic enamel paint of approved brand and manufacture. Including ISI marked Stainless Steel butt hinges with necessary screws complete upto all floor levels and heights in all respects as per direction of Architect and Engineer in charge

Providing and fixing 35mm thick IInd class Deodar wood glazed shutter for window/ clerestory windows as per required drawing design and specification with necessary Stainless Steel butt hinges with screws including providing and fixing of 4 mm thick glass panes of approved quality with necessary beading and sash bar (Deodar wood 2nd class) etc including applying priming coat of wood primer and then two or more coats with synthetic enamel paint of approved brand and manufacture complete upto all floor levels and heights in all respects as per direction of Architect and Engineer in charge.

Providing and fixing double action hydraulic floor spring with stainless steel plate of approved brand and manufacture IS: 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with Stainless Steel pivot and single piece cast iron outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Providing and fixing IS: 3564 marked aluminum extruded section body tubular type universal hydraulic door closer, with double speed adjustment with necessary accessories and screws etc. complete. Hardwyn make (Gazel) or equivalent.

Providing and fixing bright finished Stainless Steel 100 mm mortice latch and lock ISI marked with six levers and a pair of anodized (anodic coated not less than grade AC 10 as per IS : 1868) aluminum lever handles with necessary screws etc. complete, best make of approved quality.

Providing and fixing aluminum ISI marked anodized (anodic coated not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. ----------do----------- a) Tower bolts 250x10 mm

----------do----------- b) Tower bolts 200x10 mm

----------do----------- c) Tower bolts 150x10 mm

----------do----------- d) Handles 125mm

----------do------------ e) Handles 100mm

----------do--------f) Hanging floor door stopper (twin rubber)

----------do------------ g) Steel Eye hook 150 mm

Providing and fixing stainless steel (Grade 304 of matt hairline finish) 50mm dia stair case railing 3'-0" height Above Riser Clear as per design and drawings including cutting wall and making good the same with PCC of mix 1:2:4 (1 cement : 2 coarse : 4 graded stone aggregate 20mm down graded) drilling holes in step / floor and filling with pig lead in holes after providing and fixing 25mm dia steel balusters on steps and 50mm dia (minimum) end balusters with necessary steel caps of approved shape and size including fixing of 12mm sq/dia bar running along baluster as per architectural drawing supplied including complete fixing and installation, polishing of all joints complete. All work upto floor V level.

Steel work welded in built-up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and then(two or more coats) with synthetic enamel paint using structural steel etc complete upto all floor levels and heights in all respects as per directions of Architect & Engineer in charge. In gratings, frames, guard bar, ladders, railings, brackets, gates, trusses, frame work and similar works.

Providing and fixing aluminum grill Powder coated aluminum (minimum thickness of powder coated 50 microns) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminum standard section around the opening, all complete as per requirement and direction of Engineer incharge (only weight of grill to be measured for payment).

Providing and laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) including centering, shuttering, machine mixing, finishing, curing etc. complete. All work upto floor V level.

40mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded crushed stone aggregate 20mm nominal size) including applying a floating coat of neat cement slurry finished.

P&L water bound Macadam with specified stone aggregate, stone screening 13.2/11.2mm size and binding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonnes capacity complete. WBM Grade-I (90mm to 45 mm), Grade-II (63mm to 45mm) & Grade-III (53mm to 22.4mm).

Providing and laying 50mm thick pre-mix bituminous macadam base with stone aggregate of quality, size and grading as specified in CPWD Specifications and straight run bitumen of grade 80/100 @ 4% by weight to total mix including hot mixing of stone aggregate and bitumen in hot mix plant transporting mixed material and laying mixed material with paver finisher to the required level and grade, rolling with road roller of 8 to 10 tonnes capacity to achieve the required compaction and density complete job (including tack coat on WBM @ 0.75 kg/sqm) including cost of bitumen complete job.

P& L of 20 mm thick open graded pre- mix carpet surface with hot mix plant & paver finisher with 1.80 cum & 0.90cum of stone chipping of 13.2 mm & 11.2 mm size respectively & 52 kg & 56 kg of hot bitumen per cum. of stone chipping of 13.2 mm and 11.2 mm size respectively and consolidation with road roller of 6 to 9 tons capacity including preparation of existing road surface as per specification and then laying of tack coat @ 0.50 kg/sqm with hot straight run bitumen grade 80/100 spraying the bitumen with mechanically \spray unit @ 0.50 kg/sqm. And finally finishing the surface with seal coat using 128 kg of bitumen of grade 80/100 per cum. of fine aggregate (crushed sand) per 100 Sqm. of road surface including rolling and finishing with 6 to 9 ton road roller complete.(including cost of Bitumen).

Honey comb brick work 10/11.4cm thick with second class burnt clay bricks in cement mortar 1:4 (1cement 4 coarse sand ) complete.

Providing and filling (hand packed) brick bat in soakage pit around the honey comb brick masonry including leveling and compacting etc complete.

Providing and laying of River Bed Material (RBM) including watering, compacting, ramming & rolling with power road roller 8 to 10 tonn capacity including all lead, lifts and carriages complete job.

Supplying and laying 1.00 mtr dia hume pipes (NP3) including fixing of collars with cement mortar, all lifts and carriages (For hume pipe culverts)

Dry Random Rubber Masonry with hard stone in foundation and plinth using nallah stone.

SANITARY WORK Providing and fixing vitreous china pedestal type (European type/ wash down type) water closet pan (parryware/hindware/cera) including providing and fixing solid plastic seat with lid (which colour) and providing and fixing low level chainaware flushing cistern with all manually controlled device (handle lever) confirm to Is; 7231 (Parryware /Hindware/Cera) 10 liter capacity – white in colour fitted with unplasticised PVC connection pipe 15mm nominal bore, brass end union 45 to 60 cm length, G.I. inlet connection for flush pipe connecting WC pan, PTMT angle valves (02 Nos) 15 mm nominal bore (Prayag make) CP jet (heavy duty) with PVC connection pipe to be fixed with European type WC complete job. Nothing extra shall be paid.

Providing and fixing water closet squatting pan (Indian type W.C. pan) Orissa pattern white vitreous china WC pan of size 580*440 mm with integral type foot rests (Hindware/Parryware/Cera) with 100 mm sand cast Iron P or s trap, including cost of cement concrete 1:2:4 platform, 10 litre low level PVC flushing cistern (of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings PTMT angle valves Prayag make brackets, 32 mm diameter flush pipe with fittings, PVC connection pipe 15mm nominal bore and 45 to 60 cm long complete job including painting of fittings and brackets, cutting and making good the walls and floor wherever necessary.

Providing and fixing (parryware /Hindware/Cera) make vitreous chinaware wash hand basin consisting of PTMT waste Coupling 32 mm dia , PTMT push type pillar tap, PTMT angle valve 02 No. (Paryag make) PVC waste pipe Unplasticised PVC connection pipe 15 mm nominal bore, brass end union 45 to 60 cm length complete job including making good the wall and floor in all respects. size 550x400 mm

Providing and fixing (parryware /Hindware/ Cera) make white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings and making good the wall and floor complete in all respects..

Providing and fixing best quality Parryware / Hindware/cera make Vitreous chinaware flat back half stall urinal of 580x380x350 mm with PTMT pressmatic tap auto closing system angle valve PTMT, dome waste, PTMT spreader with brass unions and GI clamps complete including fittings, brackets, cutting and making good the walls complete in all respects.

Providing and fixing best quality Parryware / Hindware/cera make Vitreous white vitreous chinaware urinal partitions size 755x165x365 mm including cost of all material, fittings and labour complete in all respects.

Providing and fixing of white vitreous china oval shape wash basin (Make Parryware / Hindware/cera) of size 550x400 mm with 15 mm PTMT pillar cock, PTMT 32mm dia, PTMT waste coupling PVC waste pipe, PTMT Angle valve (Prayag Make) PVC connection pipe complete job including making good the wall and floor complete in all respects. (counter item will be paid in civil work)

Providing and fixing Salem Stainless Steel A ISI 304(18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel waste coupling and plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. Including providing and fixing of 40mm dia PVC waste pipe (Flexible) and Unplasticised PVC connection pipe with brass end union 45cm length and 15 mm nominal bore as required Kitchen Sink with drain board 510x1040 mm bowl depth 225 mm

----do--Kitchen Sink without drain board 610 x 510 mm bowl depth 200mm

Providing and fixing 750x600 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with frame of ornamental teak wood moulding with 6cm thick hardboard backing fixed on wall with necessary brackets and screws etc. complete.

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete.

Providing and fixing C.P Brass toilet paper holder.

Providing and laying PVC rain water pipes 4 kg/cm2 pressure excluding PVC fittings, jointing with adhesive/seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. (Uniplas/Supreme/Finolex/Astral make) 110 mm dia

----------do-------------- 80 mm dia

Providing and fixing in position PVC specials as per IS: 14735 including cutting, jointing and wastage double socket 'B' & fitting with rubber gasket joint at all heights, levels, including cutting jointing, wastage, cutting chases and hole and other required material as per directions of Architect / Engineer-in-charge. PVC BEND 110 mm dia

PVC BEND 80 mm dia

PVC SINGLE JUNCTION WITH DOOR 110 x110x110 mm dia

PVC SINGLE JUNCTION WITH DOOR 80 x80x80 mm dia

PVC COLLOR 110 mm dia

PVC COLLOR 80 mm dia

PVC COWLS 110 mm dia

PVC COWLS 80 mm dia

PVC SHOE 100 mm dia

Providing and fixing PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. Sand cast 100 mm inlet and 100 mm outlet

--------do------------ 100 mm inlet and 75 mm outlet

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with brackets of the same materials with snap fitting of approved quality and colour, weighing not less than 105 gms. (Prayag Make)

Providing and fixing PTMT towel Ring trapezoidal 215 mm long, 200 mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms (Prayag Make)

Providing and fixing PTMT Towel rail complete with end brackets fixed on wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. (Prayag Make)

providing and fixing M.S. holder bat clamp of approved design to) SWR uPVC pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4 Each. 6mm dia expansion hold fasteners including drilling necessary holes in brick wall / CC / RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x 1.6mm galvanized M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts and washers of size 25x6mm, one bolt on each side of the pipe. Total brackets length 580mm of approved shape and design (for single 90mm/110mm dia pipe)

Earth work in excavation by manual/mechanical means in trenches for drains, pipes, cables and the like including refilling and disposal of surplus earth within the University campus as directed by engineer incharge. In All Kinds of Soil/ Ordinary Rock/ Hard Rock (Blasting Prohibited)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting chases and making good the walls (medium grade) concealed / Exposed on wall. 15 mm dia nominal bore

----------do------------ 20mm dia nominal bore

----------do------------ 25 mm dia nominal bore

----------do------------ 32 mm dia nominal bore

----------do------------ 50 mm dia nominal bore

----------do------------ 65 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work). 25mm dia nominal bore

----------do---------- 32mm dia nominal bore

----------do---------- 65mm dia nominal bore

----------do---------- 100 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 25mm nominal bore

Providing and fixing gun metal non return valve of approved quality (screwed end). 25 mm nominal bore Vertical

---------do---------- 32 mm nominal bore Vertical

---------do--------- 40 mm nominal bore Horizontal

---------do---------- 50 mm nominal bore Horizontal

Providing & fixing PTMT swiveling shower rose 15 mm of Prayag make weighing not less than 40 gms complete job.

Constructing masonry Chamber 30x30x50 cm, inside with 2nd class common brunt clay bricks in cement mortar 1:5 for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.

Painting G.I. pipes and fitting with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. 15 mm diameter pipe

---------do------------ 20 mm diameter pipe

---------do------------ 25 mm diameter pipe

---------do------------ 32 mm diameter pipe

---------do------------ 50 mm diameter pipe

---------do------------ 65 mm diameter pipe

Providing and filling sand of coarser grade all-round the G.I. pipes in external work. 25 mm dia pipe

--------do----------- 50 mm dia pipe

--------do----------- 65 mm dia pipe

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 15 mm nominal bore

---------do------------ 20 mm nominal bore

---------do------------ 25 mm nominal bore

---------do------------ 32 mm nominal bore

---------do------------ 65 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License Each with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex/Star, Lotus having valid ISI license).

Providing and fixing PTMT bib cock half / full turn fitting 15mm nominal bore 122 mm long weighing not less than 99 gms Prayag make complete in all respects.

Providing and fixing PTMT long body bib cock with wall hang half / full turn fitting 15mm nominal bore 165mm long weighing not less than 110 gms Prayag make complete in all respects.

Providing and fixing PTMT stop cock (concealed) of 15mm nominal bore 108 mm long weighing not less than 108 gms. Prayag make complete in all respect.

Providing and fixing PTMT angle stop cock 15mm nominal bore weighing not less than 85 gms. Prayag make complete in all respects.

Providing & laying PVC pipes 4kg/sqcm pressure of approved quality including jointing with jointing solvent/adhesive (Supreme/Prince/Finolex) of following nominal dia (For Sewer line/Drainage) 100 mm diameter

---------do----------- 150 mm diameter

---------do----------- 200 mm diameter

Providing and laying cement concrete of specified grade a) Cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded crushed stone aggregate 40 mm nominal size) around PVC/CI/SW pipes including bed concrete as per standard design (150 mm thick all around) for 100mm/150mm/200mm diameter pipe in ground (External work).

Providing and fixing square - mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight CI cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 kg as per standard design. 100x100 mm size P type with F.P.S. bricks class designation 75

Constructing brick masonry chamber for underground CI inspection chamber and bend with 75 class designation bricks in cement mortar 1:5 (1 cement : 5 fine Sand) including fixing angle iron frame 65x65x6mm with hold fast and covered with precast RCC Manhole cover 1:2:4 of required size including cost of reinforcement as required. RCC top slab with 1:2:4 (1 cement : 2 Coarse Sand : 4 graded stone aggregate 40mm nominal size), foundation concrete 1:5:10 (1 cement : 5 Coarse Sand : 10 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. Inside dimensions 600x850 mm and depth from 45cm upto 1.0 mtr. for single pipe line with three or more inlets. With F.P.S. bricks

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 Coarse Sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement : 4 Coarse Sand : 8 graded stone aggregate 40mm nominal size) and inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks with class designation 75. a) Inside size 90x80cm and depth from 45 cm upto 1.0 mtr. including fixing angle iron frame 65x65x6mm with hold fast and covered with precast RCC Manhole cover 1:2:4 of required size including cost of reinforcement as required.

Providing and fixing G.I Tank nipple of Size 1” to 2: for connection complete in all respect.

Providing and Fixing of check Valve for motor 32mm nominal bore of approved quality complete in all respects.

Providing, installing and commissioning mono block water motor 1 HP make Crompton /servo complete in all respects.

Providing M.S foot rests including fixing in manholes with 20x20x10cm cement concrete blocks 1:3:6 (1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size) as per standard design. With 20 x 20mm square bar.

Providing, Supply & installation of : i) PFC collector IS – 12933 PART I & II of solar water heating systems capacity 500-1000 LPD complete with stainless steel hot water tank with heat exchanger, support structure to collectors, hot water, cold water PVC sintex tank, temperature gauge. Electrical elements 3x3 KW with thermostat ii) Cold water pipe line GI B - class with fittings 25 mm compete iii) Hot water pipe line GI B – class with fittings 40 mm with rock wool compete 50 mm thick insurance of 48 kg/cu m density and K value = 0.028 to 0.033 W/MK, R value = 1.67 sqm C/W material like chicken mess etc 26SWG thick aluminum sheet. iv) Hot water pipe line GI B- class with fittings 25 mm with rock well compete 50 mm thick insulation of 48 kg/ cu m density and K value= 0.028 to 0.033 W/MK, R value = 1.67 sqm C/W material like chicken aluminum sheet. v) Hot water pipe line GI B- class with fittings 15 mm with rock wool compete 50 mm thick insurance of 48 kg/cu m density and K value= 0.028 to 0.033 W/MK, R value = 1.67 sqm C/W material like chicken thick aluminum sheet. vi) Cable of 2.5 mm sq. 2 core unarmored cable vii) Electrical back up control panel

Dwarka Construction

vijay builders

National Projects Construction Corporation Limited