REPAIR TO WOODEN FURNITURE INCLUDING POLISHING FOR OTM AND MD ACCN UNDER GE (EAST) DELHI CANTT-10

Amount

A) Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu i.e. in repair/replacement of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges,denting, placing everypart in-tact, for following items here-in-after including finishing with paint etc as per direction of BOQ, Notes at the end of BOQ & as per drgs. B) Work will be executed where the furniture exist in different User Units/ Married Accn of GE(East) Delhi Cantt including BSO Furniture Yard as directed by Engineer-in-Charge CHAIR EASY (FD-229)

Front leg made of Ist class hard wood seasam/teakwood all as shown on drawing and as directed.

(ii) All as per srl item No. 1.01 here- in- before but rear leg.

(iii) All as per srl item No. 1.01 here-in-before but arm.

(iv) All as per srl item No. 1.01 here-in-before but front/back/side rail.

(v) All as per srl item No. 1.01 here-in-before but canning bits.

CHAIR DINNING (FD-228 & 279)

(i) Front leg made out of Ist class hard wood seasam/ teakwood all as shown on drawing and as directed.

(ii) All as per srl item No. 2.01 here-in-before but rear leg.

(iii) All as per srl item No. 2.01 here-in-before but front/back/side rail.

(iv) All as per srl item No. 2.01 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 45mm x 15mm ).

(v) All as per srl item No.3.01 here-in-before but stiffener between front leg to rear leg.

(vi) All as per srl item No. 2.01 here-in-before but stiffener for jointing to side stiffeners.

(vii) All as per srl item No.2.01 here-in-before but canning bits.

CHAIR DINNING (JCO/ORs) (FD/MAP-II/05)

Front leg made out of Ist class hard wood seasam/ teakwood all as shown on drawing and as directed by engineer-in-Charge.

All as per srl item No. 3.01 here-in-before but rear leg.

All as per srl item No. 3.01 here-in-before but front/back/side rail.

All as per srl item No. 3.01 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 45mm x 15mm ).

All as per srl item No. 3.01 here-in-before but stiffener between front leg to rear leg.

All as per srl item No. 3.01 here-in-before but stiffener for jointing to side stiffener.

PVC seat all as shown on drawing and as directed by engineer-in-Charge. Make Amko

CHAIR WRITING (FD-250 & 280)

Front leg made out of Ist class hard wood seesam/teakwood all as shown on drawing and as directed.

All as per srl item No. 4.01 here-in-before but rear leg.

All as per srl item No. 4.01 here-in-before but front/back/side rail.

All as per srl item No. 4.01 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 50mm x 15mm).

All as per srl item No. 4.01 here-in-before but stiffener between front leg and rear leg.

All as per srl item No. 4.01 here-in-before but stiffener for jointing to side stiffeners

All as per srl item No. 4.01 here-in-before but arm.

All as per srl item No. 4.01 here-in-before but canning bits.

S & F wooden corners made of first class hard wood seesam to legs joining top rails each with steel screws.

SIDE BOARD (FD-241/ FD/E6/MAP/)

Top made out of 18mm thick exterior grade pre-laminated particle board,teak faced,ISI marked, with 04mm thick teak wood beading all-around the top all as shown on drawing and as directed. (Make:- Ecoboard).

All as per srl item No. 5.01 here-in-before but door shutter including knobs / handles and continues piano type hinges.

All as per srl item No.5.01 here-in-before but side.

All as per srl item No.5.01 here-in-before but bottom.

All as per srl item No. 5.01 here-in-before but vertical partition.

All as per srl item No. 5.01 here-in-before but shelf.

Back ply of same size made out of 06mm thick commercial plywood (ISI marked),BWR grade all as shown in dry and as specified.

Drawer of same size and shape to Side board including knob/handle all as shown on drawing.

100mm long CP steel handle with steel screws as per sample ,shape and size all as per drawing and as directed.

Legs with frame as per existing size made out of Ist class hard wood teak and duly polished irrespective of all as shown on drawing and as directed.

TABLE CENTRE (FD– 235 & 274)

Top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. (Make:- Ecoboard ).

Leg made out of Ist class hard wood teak/seesam to Table Centre duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No. 6.02 here-in-before but long top rail.

All as per srl item No.6.02 here-in-before but bottom rail.

All as per srl item No. 6.02 here-in-before but side rail the top.

S&F new steel bracket/corners of suitable size to table centre with steel screws all as shown on drawing and as directed.

TABLE BED SIDE (FD 248 & 276)

Top made out of 18 mm thick exterior grade pre-laminated particle board,teak faced,ISI marked all as shown on drawing check 4mm thick teakwood beading all around duly polished as directed. (Make:- Ecoboard).

All as per srl item No. 7.01 here-in-before but side.

All as per srl item No. 7.01 here-in-before but shelf / bottom shelf.

Back ply of same size of 06mm thick commercical plywood (ISI marked) including one coat of french polish all as shown on drawing and as directed.

TABLE DINING 06 PERSONS (FD- 239, 273 & 376)

Top made of 18mm thick exterior grade particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. (Make:- Ecoboard).

Leg made out of Ist class hard wood teak/seasam to table dining 06 persons duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No. 8.02 here-in-before but long rail.

All as per srl item No 8.02 here-in-before but short rail.

S & F wooden corners made of first class hard wood teak/seasam to legs joining top rails each with 04 Nos of steel screws.

TABLE DINING 08 PERSONS

Top made of 18mm thick exterior grade, ISI marked particle board duly post-formed (PFT) with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. (Make:- Ecoboard).

Leg made out of Ist class hard wood teak/ seasam to Table Dining 08 persons duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No. 9.02 here-in-before but long rail.

All as per srl item No. 9.02 here-in-before but short rail.

S & F wooden corners made of first class hard wood teak to legs joining top rails each with 04 Nos of steel screws.

STOOL DRESSING CUSHIONED (FD/E6/MAP/14)

Seat made of 32 density,75mm thick foam cushion duly uphostered with leatherite including bottom plywood 12 mm thick commercial . All as per existing drawing and as directed. (leatherite shall not be less than Rs 200/- per meter).

Leg made out of Ist class hard wood teak/seasam to stool dressing duly french polished all as shown on drawing and as directed.

All as per item No. 10.02 here in before but stiffners.

All as per item No. 10.02 here in before but front/side rail.

S & F wooden corners made of first class hard wood teak to legs joining top rails each with 04 Nos of steel screws.

T V TROLLEY (FD/E6/MAP/04)

05mm thick glass shutters duly fixed with stainless steel fitting for fixing of glass shutters including magnetic catcher to existing TV trolley. The size of the glass shall be as per existing TV trolley or as directed.

50 mm dia swivel type castors wheel to TV trolley all as specified and directed. (Each set contain 04 dual wheels )

Top made of 18 mm thick teak faced exterior grade pre-laminated particle board all as per shape and size as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

All as per srl item No. 11.03 here-in-before but side.

All as per srl item No. 11.03 here-in-before but back.

Telesposic channel with new one as size avilable

BIN LINEN MULTIPURPOSE (FD/E6/MAP/09)

Top made out of 18mm thick exterior grade pre-laminated particle board teak faced with 04mm thick teak wood beading duly polished all-around the top of side board all as shown on drawing and as directed. (Make:- Ecoboard).

All as per srl item No. 12.01 here-in-before but bottom of Bin linen with seesom legs & Frame.

All as per srl item No. 12.01 here-in-before but door shutter.

All as per srl item No. 12.01 here-in-before but side.

All as per srl item No. 12.01 here-in-before but shelf.

All as per srl item No. 12.01 here-in-before but vertical partition.

All as per srl item No.12.01 here-in-before but drawer.

Hinges to Bin linen as per size and design shown on drg complete all as directed.

CP steel handle to Bin linen as per shown on drg and as directed.

Magnetic catcher to Bin linen as per size and design shown on drg.

Back partical pre laminated board of same size made out of 12mm thick all as shown in drawing and as directed.

Legs with frame of size (40x25x100mm) made out of Ist class hard wood teak/seasam and duly french polished irrespective of all as shown on drawing and as directed.

BOOK CASE (FD-237& FD/E6/MAP/)

Top made out of 18/19mm thick commercial pre-laminated particle board teak faced with 04mm thick teak wood beading all-around the top of side board all as shown on drawing and as directed. (Make:- Archid).

Legs with frame of size (40x25x100mm) made out of Ist class hard wood teak/seasam and duly french polished all as shown on drawing and as directed.

Back ply of same size made out of 06mm thick commercial plywood (ISI marked) all as shown in drawing and as directed.

All as per srl item No.13.02 here-in-before but bottom.

All as per srl item No.13.02 here-in-before but shelf.

All as per srl item No.13.02 here-in-before but side.

All as per srl item No.13.02 here-in-before but door with piano type hinges.

TABLE DRESSING LADIES WITH MIRROR (FD-32 (M) 251)

05mm thick looking mirror of same size duly fixed in new frame of teak wood and duly french polished all as shown on drawing. (Make:- Modi-guard).

40 mm size knob as per shape and size shown in drawing and as directed.

05mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.

Legs with frame of size (40x25x150mm) made out of Ist class hard wood teak as shown on drawing and as directed.

All as per srl item No.14.02 here-in-before but drawar.

TABLE DRESSING GENTS WITH MIRROR (FD-31(M) & 230)

05mm thick looking mirror of same size duly fixed in new frame of teak wood and with two Nos of MS hanging clips with 03 holes to fix on wall and duly french polished all as shown on drawing. (Make:- Modi-guard).

Box with two Nos of drawers with CP brass knobs and made out of 18mm thick exterior grade pre-laminated particle board teak faced, 12mm thick commercial plywood at back and having 04mm thick teak wood beading wherever required to the box and duly french polished all as shown on drawing and as directed. (Make:- Archid ).

Drawer made out of 18mm thick exterior grade pre-laminated particle board teak faced with 04mm thick (Make:- Archid ).

40 mm size CP brass knob as per sample, shape and size shown in drawing complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR MAP (FD/E6/MAP/16)

5mm thick looking mirror of same size duly fixed in new frame of teak wood and with two Nos of MS hanging clips with 03 holes to fix on wall and duly french polished all as shown on drawing. (Make:- Modi-guard).

Box with two Nos of 5mm glass shelf with of 18mm thick exterior grade pre laminated MDF board . teak faced 12mm thick commercial plywood at back and having 04mm thick teak wood beading wherever required to the box and two nos glass 5mm thick shelf in box and duly french polished all as shown on drawing and as directed. (Make:- Archid ).

STOOL DRESSING CB FD-282

Side short/long top rail of Ist class hard wood teak wood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

All as per srl No 17.01 here in before legs.

All as per srl No17.01 here in before stiffiner.

HAT STAND WITH MIRROR (FD-233 & 362)

04mm thick OSTF commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. (Make :- Greenply/Century/Duro)

04mm thick commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. (Make :- Greenply/Archid/Duro)

05mm thick looking mirror of same size and fixed in position with teak wood beading all around complete all as shown on drawing (Make:- Modi-guard).

06x35mm thick teak wood beading all as per drawing and directed.

Teak wood wooden battens as per shape and size shown in drawing and as directed.

Aluminium pegs from Hat stand and S&F new Aluminum pegs of size 120x75mm (overall) to Hat stand all as per drg.

TABLE DRESSING LADIES WITH STOOL (FD/E6/MAP-II/07)

Drawer made out of 18mm thick exterior grade pre-laminated particle board teak faced with 04mm thick teak wood beading wherever required to the drawer all as shown on drawing and as directed. (Make:- Archid/Action- tesa / greenply).

All as per srl No 19.01 here in before but side.

All as per srl No 19.01 here in before but door shutter.

All as per srl No 19.01 here in before but looking mirror S&F of new mirror of same size. Make modi guard.

Steel handle/ knob as per drg and direction.

REPAIR TO BED PLYWOOD TOP (FD-246)

Top of bed ply wood with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/green ply fixed on the top of bed plywood with screws complete, all as specified and shown in drawing and as directed by the Engineer-in-Charge,.

Leg of bed ply wood of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed by the Engineer-in-Charge,

Long rail of bed ply wood of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed by the Engineer-in-Charge, .

Short rail using old serviceable long rail obtained from serial item No 20.03 here in before including cutting and made to shape and size of short rail complete, all as specified and shown in drawing and as directed by the Engineer-in-Charge.

Head board all as per drawing and as specified and directed by the Engineer-in-Charge,

Foot board all as per drawing and as specified and directed by the Engineer-in-Charge,

RECANNING TO DIFFERENT TYPE OF CHAIR :Recanning of wooden chair of different that is chair dinning, chair easy, chair writing stool cb Etc size with 02mm wide cane having 03mm wide plastic cane border in godrej pattern all as shown on drg. Make shah/ aryan & premier.

RECANNING TO CHAIR VERANDAH :Recanning of seat & back of chair verandah with size of 04mm thick plastic cane in Godrej pattern all as shown on drg. Make shah/ aryan & premier.

Repairs to various type of visitor chair

a) Arms of PU/fibre of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

b) Chromium plating after taking out all pipe and refitting after Chromium plating complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

c) Seat and back, changing cloth of seat and back with leather / crape or matti of not less than Rs 200/- per meter including changing / replacement of foam cushion of seat and back with high density foam (as approved) of required existing thickness and size including all new hardware and accessories and refixing complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Repairs to various type of medium / low back / revolving chair

a) Steel base of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

b) Fibre base of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

c) Hydrolic of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

d) Tilt mechanism of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

e) Arms of PU/fibre of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

f) Push back of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

g) Wheel of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

h) Seat base 12mm thick readymade as per existing of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

i) Back base 12mm thick readymade as per existing of make Feda / World Wide / Nobel complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

j) Wooden arms of chair by scrubbing and applying lacquer polish one or more coat to achive required finish complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

k) Cloth and cushion for seat and back of chair by taking out seat and back, changing cloth of seat and back with leather / crape or matti of not less than Rs 200/- per meter including changing / replacement of foam cushion of seat and back with high density foam (as approved) of required existing thickness and size including all new hardware and accessories and refixing complete all as specified and directed

Painting and polishing :Material and labour for complete removing/scrubbing the entire old polished surfaces by gridining of the following items with grinding machine, including preparation of old wooden surfaces by applying seina/burnt seina uniformally and filing of cavities with putty/filler and applying one or more coat of french polish with as directed in order to obtain glossy finish to the to the entire satisfaction of Engr-in-Charge and all as directed.

All same as Ser No 25.00 but Bed ply top (FD-246 & 247)

All same as Ser No 25.00 but Chair Easy (FD-229)

All same as Ser No 25.00 but Chair Dining (FD-228 & 279)

All same as Ser No 25.00 but Chair Dining (JCOs/ORs) (FD/MAP-II/05)

All same as Ser No 25.00 but Chair Writing (FD-250 & 280)

All same as Ser No 25.00 but Side board (FD-241& FD/E6/MAP/)

All same as Ser No 25.00 but Table centre ( FD-274 & 235)

All same as Ser No 25.00 but Table bed side (FD-248/276)

All same as Ser No 25.00 but Table dining 06 person (FD-273, 239 & 376)

All same as Ser No 25.00 but Table dining 08 person (FD-273, 239 & 376)

All same as Ser No 25.00 but Stool dressing cushioned and CB (FD/E6/MAP/14 FD 252)

All same as Ser No 25.00 but Hat stand with Mirror (FD-233)

All same as Ser No 25.00 but Trolley for TV (FD/E6/MAP/)

All same as Ser No 25.00 but Bin linen multipurpose (FD/E6/MAP/07)

All same as Ser No 25.00 but Book case (FD-237)

All same as Ser No 25.00 but Table dressing ladies with mirror (FD-32(M) & 251& FD/E6/MAP-II/07)

All same as Ser No 25.00 but Table dressing gents with mirror (FD-31(M) & 230 FD /E6/MAP/16)

All same as Ser No 25.00 but Chair Visitor

All same as Ser No 25.00 but Bed Ply top (FD-246)

All same as Ser No 25.00 but Chair verandah

Notes for BoQ:-(a) The furniture article as and when received from Unit/Occupant as case may be, the Engineer-in-Charge (BSO) shall enter these furniture articles in furniture deposit register (IAFW-1830) and shall subsequently issue for necessary repair/polishing to the Contractor through Nominal issue voucher(NIV) mentioning the date of issue duly signed by the contractor. In certain cases the repairable furniture article can also be issued directly from units. (b) The contractor shall return these furniture articles after repair work on or before 30 days from the date of issue of furniture and nominal Receipt Vouchers (NRV) shall be issued duly signed by furniture I/C, BSO and Contractor. (c) If the contractor fails to repair and return these furniture article within 30 days, a penalty of Rs 10 per furniture article per day will be levied to contractor and the same will be recovered from contractors claims. (d) Generally the periodicity for issue of furniture from BSO Yard shall be once or twice in a month (reckoning from date of commencement of work as per WO No.1) subjected to the users requirement/availability of furniture for repair works. However care shall be taken that repairable furniture shall be issued not more than 20% of total qty of CA provision in one month. (e) Removal of Existing componants of following MES Pattern Furniture Item's Carefully without disturbing the adjoining Parts and S&F new componants of same pattern as per Drg in lieu of Dismantled / Discorded componants including Tighting the Joints, Pinning, Screwing, wedging, Gluing, Providing Hinges, Placing every part in-tact condition. (g) Cleaning, Derusting of Stain/Dirt old polish with Grinder machine or Sand Paper as required and as directed making the Surface smooth filling the holes with putty where ever required and Applying paint for steel surface/two coats of French Polish for wooden Items as applicable on the same. (h) Replaced/ Changed parts should be First finished seperately upto the level /extent so that the Painting /Polishing on whole Items should be matched and desired finish shall be obtained. (j) Work will be executed where the Furniture Item's exist in different user unit's/ Md accn under AOR of GE (East) Delhi Cantt including Furniture yard of BSO's Sub Division.

M/S CHANDER SHEKHAR

M/S NEHAL ENTERPRISES

RK STEEL FABRICATORs

A R construction

SMS Enterprises

Bidder Name

M/s M M BAHL