38/SE/EWC/AYO/2024-25

Amount

Safe Loading, Carriage and then safe unloading of the following material from Store Centres Under the jurisdiction of EE ESD Ayodhaya to dump site proper stacking.

33 KV V Type channel cross arm

STP 11 Mtr.

PCC 9.00 Mtr

M.S. Angle 65x65x6 mm Bracing, 4300 mm

Cost of ACSR Dog Conductor (Sag charges, cutting and wastage)

Stay Wire 7/8 SWG

33 KV Disc Insulator B & S type 70 KN polymer(additional)

MS Angle for guarding 65x65x6 mm, 3500 mm long

GI Wire 8 SWG

GI Wire 6 SWG

33 KV Pin Insulator polymer type (additional)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 9.0 Mtr PCC Pole with fitting of necessary clamp & other acessories like 1 no Channel Cross Arm, 3 No. polymer Pin insulator as per norms. (Contractor shall provide , necessary clamps, F-brackets, Nut - Bolts, Washers etc.)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 11 Mtr ST Pole with fitting of necessary clamp & other acessories like 1 No.V- Cross Arm, 3 No. polymer Pin insulator as per norms. (Contractor shall provide necessary clamps, F-brackets/top cleet, Nut - Bolts, Washers etc.)

Cradle Guarding of 33 KV line at road crossing 33 KV line crossing, canal/telephone line crossing by fixing Guarding Angle 65x65x6 mm, 3500 mm at double pole and 2600 mm long at single pole by stringing and sagging of 3 No. G.I.wire with lacing and tightening with mounting. (Contractor shall provide Necessary clamps for fitting of guarding angle and 6 No. Eye hook&bolt 12x110 mm etc.)

Stringing, sagging, binding and Jumpering of ACSR Dog conductor. 3 Phase of 33 KV Line including fixing, mounting of P.G.clamp suitable for Dog Conductor at sectional point. (Contractor shall provide necessary PG clamps etc)

Grouting of following structure by digging of pit 1.5 Mtr/1.83 Mtr deep for 9.0 Mtr PCC / 11 Mtr STP/13 mtr respectively, placing stone pad at bottom 450x450 size foundation is provided with help of steel or wooden formers, groutung with 1:4:8 Ratio cement, sand & first class brick ballast 0.268/0.285 cu mtr for 9.0 mtr PCC Pole & 11 mtr STP, plinthing 0.3 Mtr above G/L and proper plastering.

11 Mtr ST Poles

09 PCC Poles

Supply and fixing of a stone pad of size 300x300x75 mm at PCC/STP Bottom of the pit ( Contractor shall provide all materials)

Fixing of barbed wire on pole Supply and fixing of barbed wire on the pole above 2750 mm ground level. Barbed wire wrapped for a distance of 0.9 mtr. with a pitch of 13.mm at a height. (All materials supplied by the contractor)

Fixing of Danger board . Supply and fitting of Danger board of size 250x200x2 mm 3650 mm above ground level with the help of proper size of nuts, Bolts , washers and clamps as per Respo norms. RESPO Drawing No-55 (All materials supplied by the contractor)

Fixing of Number plate . Supply and fitting of Number plate of size 250x200x2 mm 3650 mm above ground level with the help of proper size of nuts, Bolts , washers and clamps as per Respo norms. RESPO Drawing No-55 (All materials supplied by the contractor)

Earthing of Pole Earthing of Pole STP/PCC by 6 SWG GI Wire by providing and fixing of 20 mm dia' earthing rod 2.550 Mtr. long as per norms complete in all respect. (Contractor shall provide all the material Like Earthing rod, Earthing clamps and nut & bolt etc Except 6swg wire.)

Petrolling in feet from starting to end and removal/lopping and chopping of tree branches which are lying in routre of 33 KV overhead line.

Fixing of additional 33 KV Disc insulator with clamp, nut & bolts etc. at required places

Providing and Fixing of 33 KV Disc fitting at required places.

Fixing of additional 33 KV polymer Pin insulator, nut & bolts etc. at required places

Fabrication and Fixing of additional Bracing angle 65x65x6 4300 mm with clamp, nut & bolts etc. at required places. Contractor shall provide clamp with nut & bolts washers etc.

Earthing of Existing Pole STP/PCC by 6 SWG Wire at required places by providing and fixing of 20 mm dia' earthing rod 2.550 Mtr. long as per norms complete in all respect. (Contractor shall provide all the material Like, Earthing rod, Earthing clamps and nut and bolts. except 6 SWG wire)

Providing and fixing of P.G clamp for Dog conductor at required places .

Straightening of additional existing erected/tilted pole with Digging & grouting at required places (All the civil material will be arranged by the contractor) Grouting of structure by digging of pit 1.5 Mtr/1.83 Mtr deep for 9.0 Mtr PCC / 11 Mtr STP/13 Mtr STP respectively, placing stone pad at bottom 450x450 size foundation is provided with help of steel or wooden formers, groutung with 1:4:8 Ratio cement, sand & first class brick ballast 0.268/0.285 cu mtr for 9.0 mtr PCC Pole & 11 mtr STP, plinthing 0.3 Mtr above G/L and proper plastering.

Left over materials after completion of the work will be deposited to the EE store division

Painting of poles Painting of poles with one coat of red oxide, two coats of enamel paint ISI mark. (All required material will be supplied by the contractor)

M/s S S Associates