Replacement of Joinery, flooring, sanitary fittings etc at AGE B R II under GE Partapur

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to stores and rubbish off the premises.

M&L 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone agg) as in floor.

M&L 15 mm thick screed bed or bedding layer of cement mortar for laying floor finish in CM 1:6

S&F non skid ceramic tile 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match

S&F non skid ceramic tile 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for rendering 10mm thick on fair faces of wall in CM 1:4 finished even and fair to receive wall tiles

M&L for glazed ceramic coloured tiles vertical surfaces (300x200mm) x 7mm thick on vertical surfaces such as skirting, dado or risers or steps etc. set and jointed in cement slurry and pointed in white or coloured cement to match the surfaces etc complete.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering.

S&F Galvanised MS sheeting of 0.63 mm thick corrugated ISI Marked and made with two corrugation side laps and fixed with J hookes two framed work with PVC and steel washers as in roof & wall all as spd and as directed by Engr-in-Charge with Zinc coating of 275

S&F plain, galvanised MS sheeting of 0.63 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint over one priming coat of red oxide complete all as specified and as directed by the Engineer-in-Charge

Dismantling wall and ceilling board (fibre, pulp, insulation etc) or insulation board/slabs/blanket any thickness including cover fillets.

Dismantling timber framed in fillets,rails, posts rafters, purlins, etc under 40 sq cm in section

M&L second class softwood plain fillets,rectangular in section, clean sawn, secured with nails exc 13 and n.exc 25 sqcm

M&L 9mm thick ply wood as in ceiling fixed with nails to timber framed work (grade BWR type BB)

M&L 9mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work on walls

Taking down shutters of any description n.exc 1 Sqm each.

Taking down shutters of any description but exc 1 Sqm and n.exc 2 Sqm each .

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each.(Steel/Wooden)

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each.(Steel/Wooden)

S & F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

S & F 2nd class hard wood 30 mm thick glazed and skelton shutters, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing gauge etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a).

S&F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats

M&L for painting to wooden surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc complete

S & F butt hinges 100mm mild steel cold rolled, medium weight.

S & F butt hinges 75mm mild steel cold rolled, medium weight.

S & F 150mm long aluminium, anodized barrel tower bolts of extruded section and fixed.

S & F 100mm long aluminium, anodized barrel tower bolts of extruded section and fixed.

S & F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed in repairs.

S & F 125mm long aluminium handles, cast type anodized.

S & F 100mm long aluminium handles, cast type anodized.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each panes.

Demolition of precast concrete block walling built in cement mortar.

M&L precast cement concrete block masonry with solid blocks Type C1 1:3:6 (20mm graded aggregate) exc 10 cm in width and setting in mortar complete in cm 1:6

M & L rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:6, surface finished even and surface without using extra cement.

M&L preparing plastered or unplastered new surface and applying two coats of cement base paint on walls all as specified and as directed.

S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm

S & F in repairs aluminium anodised tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges, fixed in repair.

S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410x330x160mm

Taking down 15 mm steel tubing and connection including cleaning for re fixing or removal to store.

Taking down 20 mm steel tubing and connection including cleaning for re fixing or removal to store.

S&F 20mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc.

S&F 16mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc.

S & F lagging to PP-R pipes 20mm outer dia exposed all around (incl provision of lagging on pipe fitting i.e unions,elbows, nipples, tees, etc with 40mm thick bonded mineral wool performed 'SNAPON' pipesections of density 144Kg/cum conforming to IS- 9842 with chicken mesh wire netting 25 gauge, 20mm mesh with 0.01mm aluminium foil complete all as specified.

S&F in repair pillar taps cast copper alloy 15mmm bore with capstan chromium plated all as specified.

S&F in repair 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down ,screwed for iron pipe or brass ferrule complete all asspecified.

S&F in repair 15mm Stop valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor 110mm bore

S&F in repair PVC bend any radius size 110mm bore with access doors

M&L in repair PVC(SWR) floor trap plain with gratings including jointing to waste pipes with solvent cement size 75mm bore.

S & F in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with flat bottom and connection to drain or out going pipe and flushing pipe.

S & F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rests, any pattern (excluding flushing cistern and flush pipe) including connection to trap and flush pipe and making good the floor.

S & F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete.

S & F in repairs vitreous china Urinal, Half stall type, white (excluding flushing cistern and flush pipe and waste pipe) including connection with PVC 15mm dia & 30cm long

S&F in repairs vitreous china wash hand basin of 550mmx400mm white flat back including chromium plated fancy type pillar tap capstain head suitable for 15mm bore of pipe, PVC connection 15mm dia & 45cm long with chromium plated nuts and bolts and suitable washers, PVC waste pipe 32mm bore CP waste coupling including angle iron brackets of 35x35x6mm

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for PCC 1:3:6 type C2 75mm thick using 40mm graded stone aggregate as in plinth protection.

M&L for PCC 1:2:4 type B1 40mm thick using 20mm graded stone aggregate as in Floor.

Dismantling of water tank and removing to store capacity 500 Ltr

Taking down of Stainless steel WC seat Orissa pattern of size 580mm x440mm all as specified and as directed by the Engr-in-Charge.

S&F in repair 20mm decorative type curtain rods including fixing brackets etc

Supply and Installed puff water tank 500 Ltr insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified.

S&F Stainless steel WC seat Orissa pattern of size 580mm x440mm all as specified and as directed by the Engr-in-Charge.

M/S GEE AAR and SONS ENTERPRISES