Maintenance to the National Highway 160 Section from Phaltan Dahiwadi Mayani Satara Sangli Dist.Border Km. 29/00 to 112/00 in State of Maharashtra

Amount

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Providing and laying shoulder drain of trap rubble of 0.45 x 0.45 meter section at 45 degree angle to the road edge including hand packing, filling voids with sand/shingle of approved quality and ramming etc. complete as desired

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.

BITUMINOUS MACADAM: Proving and laying bituminous macadam using crushed aggregates of Grading1,premixed with bituminous binder,transported to site with VTS,laid over a previously prepared surface,finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm compacted thickness with3.4% using VG 30 grade of Bitumen.--USING Batch mix type hot mix plant with out SCADA, Sensor Paver,vibratory roller.Inciuding Tack coat Using VG10 @rate 3kg /10 sqm

BITUMINOUS CONCRETE:-Providing and laying bituminous concrete using crushed aggregates of grading1,premixed with bituminous binder @ 5.40 percent by weight of total mix and filler,transported to site with VTS, laid over apreviously prepared surface,finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 30mm compacted thickness with VG 30 grade of Bitumen, Excluding prime /tack coat. For Bitumen of specified grade--USING Batch mix type hot mix plant without SCADA, Sensor Paver,Vibratory roller with Stone Dust filler.Inciuding Tack coat Using VG10 @rate2.5kg /10 sqm

Construction of Hard murum side shoulders with approved material obtained from borrow pits with all lifts and leads transporting to site spreading grading to required slope and Compacting including laying in layers on each side with vibratory roller including artificial watering etc.complete.

Providing and fixing of retro reflectorised informatory signboard rectangular/Square in shape having area greater than 0.9square meter made out of 4 mm aluminum sheet bonded with white retroreflective sheeting of Class C (TypeIVHighintensitymicro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified background,border and back side retoreflctive symbols,letters,numerals,arrow as perIRC:67-2012TableNo8.3,supported with back support frame 25mmx25mmx3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no.mildsteel angle iron post 75mmx75mmx6mm,3.5mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45cmx45cmx60 cm,60cm below ground level as per approved drawing.The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25cm width including GI fixures and transportation etc.complete. The nut bolts of board with angle ironpost/supporting structure after fixing at site has to be electrically welded. ClassB (Type IV Highintensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screenprinted areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer incharge by the contractor/supplier.

Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 900 mm made out of 2 mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25 mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier

Providing and fixing Mandatory/Regulatory sign boards in circular shape of 600 mm dia made out of 1.5 mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm dia made out of 1.5mm aluminum sheet

Everest Infrastructure And Developers

A S Desai

Shri S.M. Autade Pvt. Ltd.

MS DESHMUKHAND COMPANY

Shivratna Roadways llp

Shri Siddheshwar COnstruction