Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.4 LAccepted-AOC A 103 VEERA GARDEN AMBEDKAR NAGAR ALWAR 301001 RAJ | ALWAR | RAJASTHAN | 301001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹36.0 L+₹4.7 L (15.2%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹38.8 L+₹7.6 L (24.2%)Rejected-Finance H NO 12 ADRASH SAINIK ENCLAVE HISAR CANTT HARYANA | HISAR | HISAR | HARYANA | 125006 | L3 | Rejected-Finance Being L3 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
15 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
REPAIR/REPLACEMENT OF DAMAGED SEWAGE LINE INCLUDING CLEANING OF SEWAGE SYSTEM AND MISC WORK IN OTM ACCN UNDER AGE B/R-II AT ITARANA, ALWAR
2023_MES_595081_2
8157/E8
Open Tender
Coal Works
Item Rate
270 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹80,000
Yes
3 Jul 2023
7 Jun 2023
17 Jun 2023
7 Jun 2023
15 Jun 2023
9 Jun 2023
7 Jun 2023 - 8 Jun 2023
Amount
Cleaning of all blockages of Nahani trap/floor trap, bottle trap, gully trap, P or S traps of WCs, by removing solid/liquid or mud deposited in the trap or CI/PVC pipe line /Bends by rodding manually and removing the sludge duly covered in a hygenic manner and making the WC (Indian or European type)/WHB/Sink/Floor trap/Gully trap fully functional upto 1st Manhole,by deploying safaiwala per day and using manual/pressure cleaning pump & flexible rods and other necessary equipments to maintain internal sewage system in the area of AGE B/R II complete all as specified and directed. Note:- (i) Contractor or his authorised representative collect such type of complaints from B/R-II complaint cell at 9.00 AM on daily basis except sunday /Holiday. No extra payment shall be made on account of collection of complaint. (ii) Safailwala shall come on daily basis with necessary equipments as reqd to carry out the necessary complaints. Non availability of equipments in any case will not be admissible. (iii) Complaint must be completed within 24 hours without any fail otherwise recovery shall be made double the market rate to the contractor. (iv) Line cleaning upto 1st manhole to be paid for separately under separate item in the BOQ.
Cleaning and rodding the blocked sewage line of 100 mm dia and depth upto 1.5 m by rodding, well flushing using adequate water between successive manholes in suitable lengths by blocking the first and last manholes of sewage line and making it clear till the smooth flow of sewage line(manhole to manhole or Gully Trap to Manhole) including desludging the manholes on both ends and cleaning the line by manual or mechanical means as directed by Engr-in-Charge and removing the sludge/sewage & other deposits obtained from line cleaning out side of MoD land in covered van/trolleyfrom site including resetting the manhole cover including taking precautionary and safety measures and making the area neat and clean complete all as specified and directed. Note :- Desludging and dewatering of Manholes for the line under cleaning to be measured and paid for separately under respective items of the BOQ as per the depth of manholes.
All as per description of serial item No 2.00 here-in-before but sewage line of 150 mm bore and depth of sewage line upto 1.50 m.
All as per description of serial item No 2.00 here-in-before but sewage line of 200 mm to 300 mm bore and depth of sewage line upto 3.00 m.
All as per description of serial item No 2.00 here-in-before but sewage line of 200 mm to 300 mm bore and depth of sewage line upto 3.00 to 4.50 m.
All as per description of serial item No 2.00 here-in-before but sewage line of 250 mm to 300 mm bore and depth of sewage line exceeding 4.50 m.
Dewatering of manholes of any capacity/depth by using pumpset or by any other mechanical means and taking out stagnated water and removing outside Def land in closed container and dumping in low lying area as directed.
Desludging of manholes of depth upto 1.5m by taking out sludge, sludge clay and any other rubbish by manual / mechnical means using honey sucker machine, suction motor mounted on vehicle, HCV mounted suction discharge machine having blow back facility with sludge tank of adequate capacity or by any other means and removing ouside Def land in closed contained and dumping in low lying area as directed. Washing the top of manholes and surrounding with fresh water and sprinkling fresh unslaked lime to make the area hygeinic complete. Notes:- 1. Volume of sludge after dewatering shall only be measured for the purpose of payment to Contractor. 2. Depth of sludge in the pit shall be measured from bottom of pit to the existing water/affluent level prior to ordering the cleaning in the presence of EIC. 3. Desludging shall be done by method as recommended by Engr-in-charge as per the site conditions.
All as per description of serial item No 8.00 here-in-before but depth exceeding 1.5 m and not exc 3 m deep complete all as specified and directed.
All as per description of serial item No. 8.00 here-in-before but depth exceeding 3.0 m and not exc 4.5 m deep complete all as specified and directed.
All as per description of serial item No 8.00 here-in-before but depth exceeding 4.5 m deep complete all as specified and directed.
Cleaning of septic tank/sump of any capacity or description including cleaning and pumping out fluid, cleaning of sludge from compartment of septic tank including intercepting chamber & washing down with water complete and removing the sludge in covered van/trolley out side the MoD land, complete, all as directed.
Cleaning of soakage well of any capacity or description including cleaning and pumping out fluid, & washing down with water complete and removing the sludge/liquid extracted in covered van/trolley/tanker out side the MoD land complete all as directed.
Checking and attending complaints of PVC/CI pipes any dia leakage from bends,clamping the vertical stacks, jointing the leakages from bends & other fittings /fixtures which is causing obstruction to sewage/ waste water flow in PVC/CI stacks including carrying out minor repairs such as replacement of jointning material or any other repair not mentioned herein before etc to make the PVC/CI functional and leak proof to the satisfaction of the occupants/users. Note: (i) Contractor or his authorised representative collect such type of complaints from B/R (ii) complaint cell at 8.30AM on daily except Sunday & Holiday. No extra payment shall be made on account of collection of complaint. (iii) Complaints must be completed with in 24 hrs without any fail otherwise recovery shall be made double the market rate to the contractor. (iv) Any new items like bends, pipes, clamps, access doors, cowl etc to be replaced while carrying out these complaints should be replaced under the respective schedules under the BOQ and will be paid for separatley in addition to this item. (v) Contractor or his authorised representative shall come on daily basis with necessary equipments as reqd to carry out the necessary complaints. Non availability of equipments in any case will not be admissible.
Surface dressing n.exc 15cm deep including Cleaning away all grass vegetation, saplings, shrubs, brush wood under growth and roots for making approach and around septic tanks, soakwells, manholes to manholes for sewage line and removing the rubbish to a distance not exceeding 50 M and deposting as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.
M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified.
M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.
M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed.
All as per serial item No 19.00 above but except stones. Note : Old serviceable stones retrieved from item No 16.00 here-in-before shall be reused under this item.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints with max depression on face from straight edge held against the dressed surface n.exc 20mm in lime or sand stone work.
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15cm thickness (below or above ground level) & removing unserviceable materials out side MoD land, complete all as directed.
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified.
Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) all as specified & as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.
M&L cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified & as directed.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.
M&L rendering 15mm thick in cement mortar 1:4 including WPC on stone masonry surfaces or on brick surfaces finished even & smooth without using extra cement complete all as specified. Note :- Quoted rate is deemed to be inclusive for work at any height and location including cost of scaffolding).
M&L rendering 15mm thick in cement mortar 1:6 on stone masonry finished even and smooth without using extra cement complete all as specified and directed. Note : quoted rate is deemed to be inclusive for work at any height and location including cost of scaffolding.
M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.
M&L preparing new surfaces of walls, plastered and applying two coat of cement base paint on walls including cornices, pillasteres over one coat of white wash complete all as specified & as directed.
M&L preparing newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.
M&L preparing newly plastered surfaces and applying three coats of white wash on ceiling/soffits of chajjas complete all as specified and directed.
Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes etc not exc 10 Sqm on plan and getting out in soft /loose soil.
All as per serial item No 34.00 here-in-before but depth exc 1.5m and not exc 3m.
All as per serial item No 34.00 here-in-before but depth exc 3m and not exc 4.5m.
Excavation over areas not exc 1.5m deep and getting out in soft/loose soil all as specified and as directed.
Excavation over areas depth exc 1.5m and not exc 3m and getting out in soft/loose soil all as specified and as directed.
Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft /loose soil.
Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified.
Demolition and breaking up 100mm bore drain pipes, salt glazed stone ware, AC, reinforced concrete set in cement mortar including PCC haunching and bedding complete.
All as per Serial No 40.00 here in above but 150 mm bore.
S&F salt glazed stone ware drain pipes of 100mm bore, grade `A’, ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified.
All as per Serial No 43.00 here in above but 150 mm bore.
M&L 150mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars including demolition and breaking up old existing pipe all as specified & as directed.
M&L 300mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.
M&L PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in bedding to NP2 pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 100mm bore pipe all as specified and as directed.
All as per Serial No 47.00 here in above but 150 mm bore.
All as per Serial No 47.00 here in above but 300 mm bore.
M&L double wall corrugated polyethylene (DWCPE) pipes of dia 150mm including laid over 150mm thick PCC 1:4:8 bed including demolition and breadking up old existing pipe and all items and activities to execute and make sewer line functional Complete. Make:- Finolex, Supreme, Prince or equivalent as approved by GE
All as per item 50.00 here in above but 200 mm dia
All as per item 50.00 here in above but 300 mm dia
M&L cement concrete (1:2:4) type B-1 (20mm graded stone agg) as in surface channels, drain and benching complete.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete including forms work, moulds mitred/stopped ends etc complete all as specified.
M&L cutting into existing manholes / septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 100mm bore pipe.
All as per serial item No. 55.00 here-in-before but for 150 mm bore pipe.
All as per serial item No. 55.00 here-in-before but for 200 to 300 to mm bore pipe.
M&L for water proofing treatment in sunken floors as described as under :- (i) Sunken floor and sides upto finished floor level shall be plastered with 15mm thick cement plaster in mortar 1:4 mixed with water proofing compound @ 3% by weight of cement. (ii) Preaparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions, complete all as specified and as directed. Note: (i) Polymeric membrane shall be laid in sunken floor and on sides upto finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofifng compound shall be measured and paid separatgely).
S&F 75mm bore UPVC (SWR) ISI marked pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors complete all as specified including dismantling & taking out old unserviceable 75mm bore PVC pipe with fittings.
S&F 110mm bore UPVC (SWR) ISI marked pipes single socketed in any length with rubber ring joints / solvent cement joints laid in trenches or in floors complete all as specified including dismantling & taking out old unserviceable 110mm bore PVC pipe with fittings.
S&F 75mm bore UPVC (SWR) ISI marked pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified including demolition & breaking up 75mm bore PVC pipe with fittings.
S&F 110mm bore UPVC (SWR) ISI marked pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified including demolition & breaking up 110mm bore PVC pipe with fittings.
S&F UPVC (SWR) ISI marked floor trap dia of outlet 75mm, with PTMT grating including jointing with solvent cement including taking out old unserviceable trap.
S&F 75 mm bore UPVC (SWR) ISI marked bends any radius complete all as specified.
S&F 75 mm bore UPVC (SWR) ISI marked bends any radius provided with access door complete all as specified.
S&F 110 mm bore UPVC (SWR) ISI marked bends any radius complete all as specified.
S&F 110 mm bore UPVC (SWR) ISI marked bends any radius provided with access door complete all as specified.
S&F 75mm bore UPVC (SWR) ISI marked branch piece, single (single ‘Y’) equal or unequal with access door.
S&F 110mm bore UPVC (SWR) ISI marked single junction (single 'T') equal or unequal provided with access door complete all as specified.
S&F 75mm bore UPVC (SWR) ISI marked single junction (single 'T') equal or unequal provided with access door complete all as specified.
S&F 110mm bore UPVC (SWR) ISI marked junction double (double ‘T’), equal or unequal with access door.
S&F 75 mm bore UPVC (SWR) ISI marked junction double (double ‘T’), equal or unequal with access door.
S&F 110 mm bore UPVC (SWR) ISI marked vent cowl complete all as specified.
S&F 75mm bore cast iron, spun pipe, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches or floors including dismantling & taking out old unserviceable 75mm bore pipe.
S&F 100mm bore cast iron, spun pipe, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches or floors including dismantling & taking out old unserviceable 100mm bore pipe.
S&F 75mm bore cast iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, fixed to walls including dismantling & taking out old unserviceable 75mm bore pipe.
S&F 100mm bore cast iron, sand cast, soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, fixed to walls including dismantling & taking out old unserviceable 100mm bore pipe.
S&F in repair 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified & as directed.
S&F in repair 75mm bore cast iron bend (any radius) with duck's foot or heel rest complete all as specified & as directed.
S&F in repair 75mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door.
S&F in repair 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete with oval access door all as specified & as directed.
S&F in repair 100mm bore cast iron bend (any radius) with or without access door with duck's foot or heel rest complete all as specified & as directed.
S&F in repair 100mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door.
S&F in repair 100mm bore cast iron branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.
S&F in repair 100mm bore cast iron Sockets (double) collars with access door.
S&F in repair 75mm bore cast iron branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.
S&F in repair 75mm bore cast iron Sockets (double) collars with access door.
S&F in repair CI cowl for 100 mm bore CI pipe complete all as specified
S&F in repair cast iron trap ‘P’ or ‘S’ for 100 mm bore pipe complete all as specified & as directed.
S&F in repair oval access doors for 75 mm bore pipe complete all as specified and directed.
S&F in repair oval access doors for 100 mm bore pipe complete all as specified and directed.
S&F in repair stack clamp made out of MS flat 50 mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 75mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.
S&F in repair stack clamp made out of MS flat 50 mm x 5mm and 16 mm dia round iron stays, including bolts & nuts, securing ends of stays to walls or roof for 100mm bore pipe including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified & as directed.
M&L extra over cast iron pipe & fitting 75mm bore providing lead joints in lieu of cement joints complete all as specified.
M&L extra over cast iron pipe & fitting 100mm bore providing lead joints in lieu of cement joints complete all as specified.
S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.
S&F in repair salt glazed stone ware gully trap square or round mouthed type 'P' of size 150 x 150 mm with CI grating, setting & jointing with cement with grouting surrounding gully trap with PCC 1:3:6, type C1 block 30x30x45cm together with necessary form work, excavation & earth work in soft/loose soil, complete, all as specified and as directed.
M&L 50mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).
S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 580x440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc including provision of PCC (1:7:12) type F2 in filling complete all as specified.
S&F as in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.
S&F in repair vitreous china wash down water closet (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed. Make : “Casade NXT Popular” of Parryware {Cat Part No C0286 (Closet), C0711 (Cistern), C2054 (Cistern Lid), E8300 (Hush Seat Cover) & E8016 (Fittings)} or equivalent of HINDWARE / CERA / JOHNSON / NEYVELI CERAMICS (NEYCER) / JAQUAR / KHODIYAR / PRAYAG
S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.
S&F in repair vitreous china counter top basin size 450 x 525 x 195 mm shape ovel of PARRYWARE / JAQUAR / SOMANY / HINDWARE / PRAYAG as approved by GE including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified & directed.
M&L 20mm to 25mm thick Granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including required cutting to suit the size of oval type wash hand basin over & including 20mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in levelling course of floors 25mm thick finished fair & even complete all as specified & as directed.
M&L coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L glazed ceramic tiles (Ist quality) (coloured) 300mm x 450mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick backing in cement & sand mortar 1:4 complete all as specified and as directed.
M&L glazed ceramic tiles (Ist quality) (coloured) 300mm x 200mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick backing in cement & sand mortar 1:4 complete all as specified and as directed.
S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 ltr capacity including 12mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, PVC connection 450mm long complete all as specified & as directed.
M&L 75mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base, surface finished fair and even complete all as specified.
M&L factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.
M&L provinding and laying at or near ground level factory made kerb stone of M-25 Grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.
M&L 30mm thick factory made moulded PVC door (Wood free) consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mm (+0.25) thick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel deign in plain / prelam colours after routing the moulded design on one side of the inside panel. 5 mm (+0.25) plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5 mm (+0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20 mm thick (5mm x 4 Nos) thick PVC sheet to be given for lock provison at lock height. Door to be fixed with frame with 3 nos. stainless steel butt hinges of size 100mm x 25mm x 2mm and 50 mm long steel screws drilled suitable to pass through both the walls of the M.S. tube other hardware should be fixed with 25mm x 8mm size steel screws etc, complete as per manufacturer’s specification and drawing or direction of Engineer-in-charge. Make:- Sintex, Duraplast, Fenesta or equivalent as approved by GE
S&F solid PVC door frame of sixe 50mm x 47mm made out 5mm thick PVC sheet prelaminated on single side and plain on other side reinforced with MS square tube including painting of edges to match with prelaminated sheet, fixed in opening as per specification stipulated in SSR Part-II (2020) complete all as directed.
S&F 100mm long medium weight cold rolled mild steel butt hinges.
S&F aluminium anodised barrel tower bolt of 200mm size extruded section, ISI marked all as specified.
S&F extruded aluminium alloy handles 150mm size fabricated type anodised ISI marked.
Taking down of shutter and refixing in different opeing exc 1 sqm and n exc 2 sqm each.
M&L rough cast plaster on exterior walls applying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed.
M&L vitrified exterior grade tiles 12mm thick (square/ rectangular), matt finished, coloured area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured grout to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed. Make : Johnson Endura Designer Series or Johnson Arcade series or equivalent as approved by GE.
M&L precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed. Note :- Reinforcement shall be measured and paid for separately.
M&L reinforcement TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
M&L steel round bars 10mm dia and over cut to length bent to shap reqd incl cranking, bending, spirally for hoping for coln and binding with mild steel wire (annealed) not less than 0.9mm dia or securing.
M&L reinforcement cement concrete (Nominal Mix), 1:2:4, type B-1(20 mm graded stone aggt) as in slab supported on walls & columns, landings, balconies, deck slabs & in shelves, water trough & the like complete all as specified.
M&L form work to soffits of suspended slabs such as in slabs, floor slabs, landings, shelves , water truff & the like in horixontal or vertically not exceeding 200 mm thick complete all as specified.
M&L brick work with sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/septic tank/ soakwell etc in sewer works set in 1:4 cement sand mortar all as specified and as directed.
Taking down chowkat or frame with shutters area not exc. 1.5 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts complete all as specified.
M/s S Amarjit Singh
virendra constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .