SAMRT PERIODICLAS OF VARIOUS ADM BLDG, CENTRAL INFRASTRUCTURE AND MD QTRS AT HMS UNDER GE (HISAR) AT HMS

Amount

Taking down cenment or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water ect complete all as specifed and directed by Enginner-in charge

M&L for 10 mm thick in cemnt mortar (1:6) on fair faced or on other than fair face surface of brick masonary or concrete surface of wall, finished even & smooth withour using extra cement completed all as specified and directed by Engineer-in -charge

M&L for 5 mm thick rendering in cement mortar (1:3) on brick or concrete surface of ceilling, mfinished even & smooth without using extra cement completed as specified and directed by Engineer-in-charge.

M&L for 15 mm thcik rendering in cement mortar (1:4) on faced or on other than fair face surface of brick mansonary, or conccrete surface of walls, finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge

M&L for preparation of newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed by Engineer-in-charge

M&L including preparation of newly plastered surface of wall and applying two coats distermpering using ariless sparay technology with amx working pressure of 3300 PSI and capable of operating single spary gun with a max material hose lengh or 30 mtr the spary machine should be or reputed manufacture with pro guard techonology and capbility of tracking pressure and paint usage an certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hard to reach areas and penetration of distermper on the surface over and incluidng one coat of acrylic waterbased interior grade primer @0.8 ltr(undiluted)10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spary machine of paint application iwh a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to try the surface for painting of subbsequent coats over and including water proofing cement based putty & 1 kag (undiluted) per sqm of average thickness 1 mm over the plastered wall after prepare surface even and smooth complete sanding of the poutty surfaces with mechanical wall sander(having mechanical vacuum mechaism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free dust etc, by skilled labour as per follwoing steps :- (1) Mix the putty powder by adding water as per manufacturer instructions and mix with putyy mixer with the mixing capacity of min 2.5 kag putty per minute. Apply the first coat the prepared mixer with the help of fully automatic airless spary machine of putty application having flow speed of max 6 ltr per minutes with a maximum pressure 3300 PSI. (3) Allow 6 to 8 hrs time to dry the putty surfaces.

M&L including preparation of newly plastered surface of wall and applying two coats of external emulsion paint using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length or 30 mtr the spray machine should be of reputed manufacturer with pro guard techonology and capability of tracking pressure and paint usage an certified by paint manufacturer and as mentioned in PS and accessories for applying external emulsion paint should be able to spray in hard to reach areas and penetration of external emulsion paint on the surface over and including one coat of acrylic waterbased exterior grade primer @ 0.8 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats over and including water proofing cement based putty @ 1 kg(undiluted) per sqm of average thickness 1mm over the plastered wall after prepare the surface even and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc, by skilled labour as per following steps :- (1):- Mix the putty powderr by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (2) :- Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (3) :- Allow 6 to 8 hrs time to dry the putty surfaces.

M&L for preparation of old surfaces (plastered or unplastered) of ceiling including conices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling, complete all as specified and directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornies, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash, complete all as specified & as directed.

M&L for preparation of old decorated, plastered or pointed surfaces of wall by complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" / 9" to make the surface free from dust, loose paint etc, by skilled labour and applying two coats of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length or 30 mtr the spray machine should be of reputed manufacturer with pro guard techonology and capability of tracking pressure and paint usage an certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over and including one coat of acrylic waterbased interior grade primer @ 0.8 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats over and including water proofing cement based putty @ 1 kg(undiluted) per sqm of average thickness 1mm over the plastered wall after prepare the surface wven and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc, by skilled labour as per following steps :- (1):- Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (2) :- Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (3) :- Allow 6 to 8 hrs time to dry the putty surfaces. complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old decorated, plastered or pointed surfaces of wall by complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" / 9" to make the surface free from dust, loose paint etc, by skilled labour and applying two coats of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length or 30 mtr the spray machine should be of reputed manufacturer with pro guard techonology and capability of tracking pressure and paint usage an certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over and including one coat of acrylic waterbased interior grade primer @ 0.8 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats over and including water proofing cement based putty @ 1 kg(undiluted) per sqm of average thickness 1mm over the plastered wall after prepare the surface wven and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc, by skilled labour as per following steps :- (1):- Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (2) :- Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (3) :- Allow 6 to 8 hrs time to dry the putty surfaces. complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old painted wooden or wood based surfaces of any description not otherwise described over 10cmm width or girth and applying one coat of syntetic enamel paint complete as specified and directed by Engineer-in-charge

M&L for prepartaion of old jpainted steel and iron surfaces of any description not otherwise described over 10 cm width or and applying one coat of synthetic enamel paint approved tint completed all as specifed and directed by Enginner-in-charge

S&F in repairs stainless steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old plastered walls and applying avg 3mm wall care putty complete all as specified and directed.

malik constructions (BID ID -3365385)

M/S D.N Choudhary (BID ID -3358324)