Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.4 LAccepted-AOC | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹35.3 L+₹65,154 (1.88%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹41.9 L+₹7.2 L (20.8%)Rejected-Finance S NO 12 LAXMINAGAR YERWADA PUNE 411006 | PUNE | MAHARASHTRA | 411006 | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹42.9 L+₹8.3 L (24.0%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹45.0 L+₹10.4 L (29.9%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
22 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KIRKEE
GE CENTRAL KIRKEE RANGE HILLS ROAD KIRKEE PUNE-411003
REPAIRS TO JOINERY STEEL DOOR MS GRILL AND ALLIED WORKS IN DEPOT BN RECORD OFFICE TEO AJIT VIHAR AT BEG AND CENTRE AREA IN AGE BR II IN GE CENTRAL KIRKEE.
2022_MES_532185_1
8656/E8 OF 2022-2023
Open Tender
Civil Works
Item Rate
270 days
BEG AND CENTRE
Class D Category a(i)
7 documents required · 7 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹86,000
Yes
22 Aug 2022
20 Jun 2022
25 Jul 2022
20 Jun 2022
22 Jul 2022
4 Jul 2022
20 Jun 2022 - 2 Jul 2022
Amount
Taking down chowkats with shutters (without taking off shutter from the frames) area exc.1.5 sqm but n. exc. 4 sqm each and removing from site etc.,complete all as specified and as directed.
All as per Sl Item No. 1 above but area n.exc. 1.50 sqm each complete all as specified and as directed.
Taking down shutters of any description area exc. 1.0 sqm and but not exc. 2.0 sqm each complete all as specified and as directed.
Taking down steel window / ventilator of any description area n.exc. 1.5 sqm each complete all as specified and as directed.
Supply and fixing powder coated aluminium door made out of hollow extruded aluminium section as specified below:- Each door having 02 Nos od disc or D type handles, 02 Nos of aluminium tower bolts, 200 mm / 250mm size one aluminium sliding door bolt, one brass mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu/TITZ), shutter to be partly glazed with 5 mm thick tinted glass and partly panelled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete using following aluminium sections:- Chowkhat frame : 101.60x44.45x1.55 mm Shutter verticle/stile: 85.00x44.45x1.56 mm Shutter middle rail : 83.50x44.45x1.54 mm Shutter top and bottom rail : 110x44.45x1.54 mm Make (i) Anodized aluminium section : Jindal / Hindalco / Indalco (ii) Particle board : Novapan / Duratuff (iii) Glass : Saint Gobain / Modi Guard / TATA
Supply and fix in repairs aluminium excruded section body, door closer hydraulically regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.
Supply and fix for powder coated aluminium sliding windows having three Nos of tracks including one guazed shutter for mosquito proofing with stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos of glazed shutters including 4mm thick coloured glass and aluminium section weight not less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed.
Supply and fix for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and as directed.
Supply and fix for pressed steel door frames of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete all as specified and as directed.
All asper Sl Item No. 09 above but of size 125 x 60mm.
Material and labour for plain cement concrete (1:2:4), type B1, using 20mm graded stone aggregate as in door frame filling, bed blocks, hold fasts etc., complete all as specified and directed.
Supply and fix PVC door frame of size 50x47mm made out of plain colour 5 mm thick PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing.
Material and labour for factory made solid PVC double moulded door shutter, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawings.
Supply and fix factory made of second class hard wood.35 mm thick plain framed panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and chemically pressure treated wood fixed to chowkats complete all as specified and directed.
Supply and fix factory made flush door shutters 30mm thick,as per IS:2202 (Part-I 1999) solid core construction, with block board core and plywood face panels, commercial type on both sides including providing teak wood beading as per drawing and painted to match the door, fixed to chowkhats all as speified and directed.
Supply and fix factory made 35 mm thick glazed and skeleton shutters of second class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted with beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I Sec-8 clause 8.23 (a) and fitted to chowkats complete all as specified and as directed.
Supply and fix steel window double leaf double shutter (gauge shutter will open inside and glazed shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauge bars of flat iron 10x 3mm thick dovetailed or welded complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed.
Supply and fix in repair pre-laminated particle board 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl lipping and patti complete all as specified and as directed.
Supply and fix anodised aluminium shutters as in partition, aluminium section weighing 0.55 kg/ m fixed in aluminium chowkat frame of size 101.60x44.45x1.55 mm including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. complete all as specified and as directed.
Supply and fix rolled mild steel strucural framed work as in doors or gates of angles or other sections with gusset plates, rails bracers etc. complete with fixing /hanging arrangenets as required confoirming to Fe 290 gde E 165 complete all as specified and as directed.
Supply and fix rolled mild steel plain black sheet in steel gates and similar work 1.60mm thick sheet cut to size, holes punched: including round headed screws, clout nails or rivetes and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning upto mitred angles, etc as required complete all as specified and as directed.
Taking down old rolling shutters and refixing the rolling shutter on same position, including having 1.0 mm thick MS steel sheet, spring, MS safety lever locks with 4 lever, 3 Nos of ball bearing and MS handles including all necessary greasing and easing, replacement of unserviceable parts including one coat of synthetic enamel paint over a coat of primer complete all as specified and as directed. NOTE :- Parts replaced shall be measured and paid seperately.
Supply only MS steel sheet 1.0mm thick complete all as specified and as directed.
Supply only spring suitable for rolling shutters complete all as specified and as directed.
Supply only MS safety lever locks with 4 levers for rolling shutter complete all as specified and as directed.
Supply only ball bearing for rolling shutters complete all as specified and as directed.
Supply only MS handles 150mm in size for rolling shutters complete all as specified and as directed.
Supply and fix in repairs butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and as directed.
All as per Sl Item No. 29 above but stainless steel butt hinges
Supply and fix 150mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and as directed.
Supply and fix extruded aluminium alloy handles 150 mm long, fabricated type, anodised complete all as specified and as directed.
Supply and fix stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and as directed.
Supply and fix for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 200mm long complete all as specified and as directed.
Supply and fix mild steel flat iron 25x3mm thick conforming to Fe-290, Gde E-165 as in holdfasts complete all as specified and as directed.
Material and labour for preparation of new or previously untreated wooden surfaces of any description not other wise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Material and labour for preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel over a coat of red oxide primer, complete all as specified and directed.
Supply and fix in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainlesssteel wire staples complete all as specified and as directed.
Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainlesssteel wire staples complete all as specified and as directed.
Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.
Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and as directed.
Supply and fix 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.
Material and labour for rolled mild steel as in framed work such as grills etc with ends of bar shouldered or rivetted or forged into spikes framed guard bars including framed flat iron of any size and section to combined with the windows completed all as specified and as directed.
Supply and fix small fittings such as brackets of any type suitable for latch and hinges block shaped doors and window stops and like including all necessary labour article n. exc. 200 cu.cm of 2nd class hard wood including 50mm size MS butt hinges medium wt cold rolled complete all as directed by Engineer-in-Charge.
Cutting holes in brick/block /stone walls built in cement mortar for inserting hold fast / lugs & making good disturbed portion in CM (1:3) or cement congrete (1:2:4), type B-1 as required (depth of embedded portion of hold fasts or lugs measured from the face of the jamb into wall exc. half brick but not exc. one brick complete all as specified and as directed.
Supply and fix in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc., complete all as specified and as directed.
All as per Sl Item No. 46 above but of anodised aluminium alloy.
Supply and fix in repairs brass knobs 35-40 mm dia complete all as specified and as directed.
Supply and fix 250mm long, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.
Supply and fix plywood, grade BWP, 12mm thick, type BB fixed with screws to timber frame work complete all as specified and as directed.
Material and labour for steel rolling shutters fixed in repairs, thickness of laths in 1.00mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push, pull or manual type, including taking out of existing rolling shutter and taking to store, complete all as specified and as directed.
All as per Sl Item No. 51 here in before but as in gear operated type with bevel gear box and crank handle complete all as specified and as directed.
Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and as directed.
Supply and fix in repair 8 feet pully operated cloth drying system, aluminium anodised 20mm dia pipes, including 4 connectors with double pully, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc., complete all as specified and directed. MAKE:- Easy dry or other equivalent make as approved by GE.
Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar(1:6) complete all as specified and as directed.
All as per Sl Item No. 55 here in before but area of each tiles exc 0.11 sqm and not exceeding 0.18 sqm.
All as per Sl Item No. 55 here in before but area of each tiles exc 0.18 sqm and not exceeding 0.38 sqm.
Material and labour for glazed ceramic coloured tiles as in vertical surface 450 X300x 7- 8 mm or 200 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and directed.
Material and labour for Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as as per direction of Engineer-in-Charge.
Demolition of precast concrete block /brick work walling built in cement mortar complete all as specified and as directed.
Material and labour for precast cement concrete block masonry exceeding 10 cm in width built in cement mortar (1:6) of Gde C-5 complete all as specified and as directed.
Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and directed
Material and labour for rendering 15 mm thick on fair faces of brick/ PCC block masonry wall in CM(1:4) finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering 15mm thick on fair faces brick work /PCC block masonary or concrete surface of wall in CM(1:6) finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Material and labour preparation of newly plastered wall surfaces of any description and applying two coats of oil bound emulsion distember over a coat of primer complete all as specified and as directed.
Material and labour preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed
Supply and fix in repairs laminated flooring oak wooden shade, width of laminate floor board is 193mm to 240mm and length of board is 1000mm to 1300mm over EPE foam with properly fixed to the grooves given in the laminated sheets. Including all necessary locking patti at end of wall and window or door joints complete all as specified and as directed.
M/S S H KHAN ENTERPRISES
S M MISHRA
Shri Sant Cosntruction
JP ENTERPRISES
M/S SUGAM CONSTRUCTION
MANIYA CONSTRUCTION CO
MAHESH DADAJI BACHHAV
DARSHAN ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .