Proposed Construction of LCH Hangar Building including Civil, Electrical and Mechanical Works at MRO Division, HAL HC.

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Year of Estblishment of Company/Business

If Other, please specify

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,

Address for correspondence:

TIN number

PAN no and Name of Holder

PF number (If any)

ESI number

Service Tax Registration No

Goods and Service Tax ID No.

SAC Code

Contact details

Registered Contractor

Pls Enter

Need to Fill Column 19

Maximum value of works excuted during the followinf 5 years. . (In Lakhs)

Pls enter Finiancial Turnover in Rupees for all the years

DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : PROVISION for 10 works are given. If more, a separate similar sheet to be made showing all the works with all details as per this FORMAT and same to Uploaded. However, 9 works details to be provided and balance work value of other works to be added and to be provided in 10th row as OTHER works.

Name of Organization with address

Balance Work On Hand

Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Quantity of work Excuted during the last three years

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Bank Statement for past three month

Latest Over draft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.

#VALUE!

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender]

You are Not Eligible

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

work done

Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate]

#VALUE!

Related Document to be Uploaded to eProcurement Portal

DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Name of members or technical personllel avalable in the organization

DETAILS OF MACHINERY AVAILABLE

Name of Mechinery

Concrete Mixers - Type etc

Vibrators - Diesel - Electrical

Weiding equipment's

a) Rectifiers

b) Welding Generators

Erection equipment's

Cranes-

Hoists-

Lifts-

Water Lifting motor pumps

a) Diesel

b) electric

Drilling Equipment's

Compressors

Trucks

Stone crushers

Bitumen hot mixture plant

Bitume boiler

Rollers

Batching plants

Vibratory rollers

Generators

Cranes-Details

Concrete pumps

Road Pavers

Rock breakers

Transit mixers

Excavators

Weight batches

Others

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

DECLARATION

Pls enter

Tender Document Cost and EMD details

Enclosed / Not enclosed

Enclosed

Enclosed

Average annual financial turn over during the last 3 years, ending 31st March 2024 [ should not be less than 30% of amount put to tender] and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account statement. . (In Lakhs)

Specification

Disposal of surplus earth / moorum / building rubbish / malba (debriswaste) / similar unserviceable, dismantled or waste material of partitions, ceiling boards, tiles, frames, etc., by mechanical transport including loading, transporting, unloading in all lifts / loads upt 10 km distance from HAL, etc., all complete as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing, etc., (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m and lift upto 1.50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing, etc., (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m and lift from 1.50m to 3.0m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m and lift from 3.0m to 4.50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains, pipes, cables, etc., in all kinds of soils (not exceeding 1.50m in width or 10Sq m on plan), including dressing of sides and ramming of bottoms, for all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge.

Returning / filling in with useful excavated soil (excluding rock), free from salts, organic or other deleterious matter (Other than black cotton soil & rock, etc., in trenches, plinth,sides of foundations, etc., spreading in layers not exceeding 20cm thick, watering, breaking / removing clods exceeding 50mm, ramming and consolidation of each deposited layer, etc., with all labour, tools & tackles, plant & machinery, etc., lead upto 50m and for all lifts, etc., all complete as directed by Engineer-in-Charge.

Supplying chemical emulsion ( Chlorpyriphos/ Lindane or any other equivaent make emulsifiable concentrate of 20%) in sealed containers including delivery as specified, etc., all complete as directed by Engineer-in-Charge.

Diluting and injecting chemical emulsion with 1% concentration for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / Sq m of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding, etc., all complete as directed by Engineer-in-Charge. Note:The activity to be carried out trhough specialised agency who has registred under NCPI and who has executed similar services for Industrial Building Area. Note: A performance guarantee bond for 10 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 10 years from the date of completion of contract / project as a whole.

Diluting and injecting chemical emulsion with 1% concentration for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre includ ing drilling and plugging holes, etc., all complete as directed by Engineer-in-Charge. Note:The activity to be carried out trhough specialised agency who has registred under NCPI and who has executed similar services for IndustriaL Building Area. Note: A performance guarantee bond for 10 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 10 years from the date of completion of contract / project as a whole.

Supplying, mixing and placing plain cement concrete (1:4:8) (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate) of required thickness using 40mm down graded hard stone/granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge.

Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20mm nominal size down graded hard stone / granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, plinth area, etc., including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing at or near ground level precast cement concrete of ratio (1:1½:3 ) in kerbs, edgings, etc., as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering,curing, etc., all complete as directed by Engineer-in-Charge.

Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above / below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.90mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry.

Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330 kgs/m3 design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement, etc., all complete as directed by Engineer-in-Charge. Note: (i) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete.

All works upto plinth level like footing, pedetsal, piles, plinth beam, flooring, including necessary openings and packing if any for laying pipes, cables, etc.,

All works above plinth level column, beams, slabs, canopy, chajja, stairscase, etc., level including necessary openings and packing if any for laying pipes, cables, etc.,

Providing and laying in position ready mixed or site batched M30 Grade with minimum cement content of 350 kgs/m3 design mix cement concrete for reinforced cement concrete work for Flooring / Pavement using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying in panels, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-Charge. Note: (i) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete.

Formwork by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc as per drawing, etc., all complete as directed by the Engineer-in-Charge Note: Formwork material is contractor's own property and shall be removed after completion of work.

Foundations, pile caps, footings, bases of columns / pedestal, flooring for mass concrete, etc.,

For Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platform catwalk, brackets, etc.,

For U.G.sumps walls / Lift pits

Supplying and laying Brick work with common burnt clay machine moulded modular bricks of class designation 7.5 for walls, chambers, ducts, drains, etc., with CM (1:6) t all levels & heights including hoisting and setting in position and along with necessary formwork, curing, finishing, making or leaving holes & chases and making making horizontal and vertical grooves 10mm wide 12mm deep before plastering, etc., all complete as directed by the Engineer-in-Charge.

Supplying and laying Half Brick work with common burnt clay machine moulded modular bricks of class designation 7.5 for walls, chambers, ducts, etc., with CM (1:4) at all levels & heights including hoisting and setting in position and along with necessary formwork, steel rod placement between every 4th course, curing, finishing, making or leaving holes & chases and making making horizontal and vertical grooves 10mm wide 12mm deep before plastering, etc., all complete as directed by Engineer-in-Charge.

Supply and Construction of Sized stone masonary works with CM (1:6) in foundation and plinth by placing the stones in layers, packing, leveling, curing and finishing the joint, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing expansion hold fasteners on C.C. / R.C.C. / Brick masonry surface backing including drilling necessary holes and the cost of bolt of Wedge expansion type, etc., all complete as directed by Engineer-in-Charge.

Fastener with threaded dia 6mm each

Fastener with threaded dia 10mm each

Providing and fixing granite stone slab of approved sahe with table rubbed, edges rounded and polished, of size [75 x 50]cm deep and 1.80cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) as per direction of EIC and finished smooth, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Granite stone slab of with (18mm to 25mm thick), area of slab not less than 0.50Sq m, like Ruby Red / Black / Cherry with gang saw cut, mirror polished, premoulded and prepolished, machine cut for platforms, vanity counters, and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Second Class Teak wood for frames of doors, windows, hand rails, frame work for partitions cut to shape and required curvature and preparing the surfaces to receive the polishing fixed in position with hold fast lugs / with dash fasteners of required dia & length / SS Screws at all heights, with necessary moisture content test, etc., all complete as directed by Engineer-in-Charge. (Fastners / hold fasts / SS Screws to be paid separately)

Providing [40 x 5]mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block [30 x 10 x 15]cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) non-decorative type of approved brand/make, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and making rectangular vision panel of 0.10Sq m with 6mm thick clear heat strengthened glass, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing panelling minimum 5.0 mm thick glass panes for glazing in panelled or glazed shutters for doors, windows,ventilators and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section [90 x 45]mm having single rebate of [32 x 15]mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 30mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish including accessories made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856 of approved brand / type, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing bright finished brass handles of 125mm size with screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing bright finished brass tower bolts of [250 x 10]mm (barrel type) with necessary screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing bright finished brass 100mm mortice latch and lock with (minimum 4 to 6 Levers) and a pair of lever handles of approved quality with necessary screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700mm), with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing aluminium sliding door bolts (aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 20mm dia chromium plated brass curtain rod / Towel rail of 1800mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing M.S. grills with made of M.S. flats, square or round bars to openings of required pattern / frames of windows with rawl plugs screws, etc., including priming coat with approved steel primer, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing mild steel round holding down bolts with nuts and washer plates, etc., all complete as directed by Engineer-in-Charge.

Supplying, fabricating, hoisting and fixing in position M.S. structual steel work E 250 (Fe 410W) in roof trusses, purlins, girders, stanchions, crane gantries, rails, edging angles, frames, fastenings, machine foundations, Deck sheets as per site requirement, etc., using standard steel rolled sections, including M.S. plates, foundation bolts, cutting to dead length where required, notching, drilling, riveting and / or welding, connecting with bolts and nuts, wedging, plumbing, truing up and painting the members with two coats of synthetic enamel paint over a coat of approved zinc chromate primer, preparation of surface, etc., all complete as directed by the Engineer-in-Charge.

Steel work welded in built up sections / framed work, in stringers, treads, landings, etc., of stair cases, use of chequered plate wherever required, edge frames / angles, guard bar, ladder, M.S. railings, False ceiling supports, brackets, gates and similar works including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel as required, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing stainless steel (Grade 304) railing made of Hollowtubes, channels, plates, etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts, etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement, etc., all complete as directed by Engineer-in-Charge. (for payment purpose only weight of stainless steel members shall be considered.

Providing and laying Glazed Vitrified floor tiles of Size [600 X 600]mm or standard availabe size with Joint in different sizes (Thickness to be sepcified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.30 Kg/Sq m including grouting the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge.

Providing and laying Vitrified tiles using various sized tiles or [600mm X 600]mm Matt / Antiskid finish (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.30 kg/Sq m including grouting the joint with white cement & matching pigments, etc., all complete as directed by Engineer-in-Charge.

Providing and laying Polished Granite stone flooring and stair case raiser / partitions / divider and steps in colour Black, Cherry / Ruby Red or Equivalent in required design and patterns, in linear as well as curvilinier portions of building as complete as per the architectural drawings / Site condition with 18mm thick stone slab on 20mm (average) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand) laid and jointed with cement slurry and pointed with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing, nosing, chamfering and making grooves, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Single socketed pipes of 110mm diameter unplasticised Rigid PVC water pipes conforming to IS : 13592 Type A of approved brand, on wall / floor including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing precoated galvanised iron profile sheets for roofs / walls (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50mm (+ 0.05 %) total coated thickness with zinc coating 120grams per Sq m as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tappingscrews of size [5.50 x 55]mm with EPDM seal, complete upto anypitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing precoated galvanised steel sheet roofing gutter or crimp curves accessories 0.50mm (+0.05 %) total coated thickness, Zinc coating 120 grams per Sq m as per IS: 277, in 240 mpa steel grade, 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws, etc., all complete as directed by Engineer-in-Charge. Note: A performance guarantee bond for 5 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole.

Crimp curve

Gutter (minimum 600mm over all girth)

Ridge sheet (Minimum 600mm width)

Plastering to internal brick / block wall with 15mm thick on the rough side of single or half brick wall of cemnet mortor (1:6) including leveling, curing and making the level smooth and at all heights, plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work, etc., all complete as directed by Engineer-in-Charge.

Plastering to ceiling with 12mm thick on the rough side with cemnet mortor (1:4) including leveling,curing and making the level smooth and at all heights and execute the work complete, etc., all complete as directed by Engineer-in-Charge.

Plastering to external brick / block wall with 18mm cement plaster in two coats under layer 12mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement : 6 fine sand) including leveling, curing and making the level smooth and at all heights, plaster drip course / groove in plastered surface or moulding to R.C.C. projections.The work to be completed as per direction of Engineer-in-Charge.

Plastering to concrete wall with 20mm thick cement plaster in two coats with suitable coats including hacking the surface, leveling, curing and making the level smooth or moulding to R.C.C. projections. The work to be completed as per direction of Engineer-in-Charge. (Water proofing chemical will be paid extra separately).

Providing and mixing water proofing material in plaster work in proportion recommended by the manufacturers like Roff, Fosroc, Basf, Dr.Fixit. The work to be completed as per direction of Engineer-in-Charge.

Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50grams / litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand, etc., all complete as directed by Engineer-in-Charge.

Providing and Finishing walls with Acrylic Smooth exterior paint of required shade for New work (Two or more coat applied @ 1.67 ltr/10 Sq m over and including priming coat of exterior primer applied @ 2.20 kg/10 Sq m) including scrapping, preparationof surface for completing the work, etc., all complete as directed by Engineer-in-Charge.

Providing and applying synthetic enamel paint for pipes, grills, chequered plate, etc., in Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, filling joints, metal patti, etc., all complete as directed by Engineer-in-Charge.

Dismantling 15 to 40mm dia G.I. / CPVC pipe including stacking of dismantled pipes (within 50metres lead) including making temporary arrangements for continuing ongoing services to toilets / division maintenance, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing bright finished brass hard drawn hooks (coat hooks) and eyes of 300mm size, etc., all complete as directed by Engineer-in-Charge.

Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Sq m by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints, etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane, etc., all complete as directed by Engineer-in-Charge. Note: A performance guarantee bond for 5 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole.

Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation, etc., all complete as directed by Engineer-in-Charge.

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material to a distance of 10km outside the HAL or to a contractor own yard outside HAL including loading and unloading lead, etc., all complete as directed by Engineer-in-Charge.

Cutting reinforcement bars manually / by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) and stacked at a distance of 50m abnd hand over the same to tehuser department, etc., all complete as directed by Engineer-in-Charge.

Demolishing brick work in cement mortar manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead, etc., all complete as directed by Engineer-in-Charge.

Demolishing stone rubble masonry in cement motar manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead, etc., all complete as directed by Engineer-in-Charge.

Dismantling steel work manually / by mechanical means in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding, etc., including dismembering, electrical fixtures, stacking within 50mts lead, etc., all complete as directed by Engineer-in-Charge.

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disconnecting any service lines if any, disposal of unserviceable material and stacking of serviceable material with in 50meters lead, etc., all complete as directed by Engineer-in-Charge.

Dismantling G.S.sheet roofing / cladding including ridges, hips, valleys and gutters, etc., and stacking the material within 50metres lead including, disconnecting service lines, fixtures if any loading and unlaoding and handing over the usefull materails to user department, etc., all complete as directed by Engineer-in-Charge.

Providing and laying C.C. Flooring of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid in panels if required and finished with screed board vibrator /vacuum dewatering process and finally finished by floating / brooming with wire brush, etc., all complete as directed by Engineer-in-Charge. (Shuttering to be paid seperately)

Providing and fixing glass shelf of size [600 x 120 x 5]mm with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing C.P. brass toilet paper holder of approved brand and fixing with screws, raw plugs, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing beveled edge mirror of size [600 x 450]mm of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Wall hung half pedestal Vitreous China Wash basin size of approx size [630 x 450]mm fixed with with C.I. brackets / rack bolts , single 15mm C.P. brass pillar taps, 32mm C.P. brass waste coupling of standard pattern, P.V.C. waste pipe with waste fittings of 40mm dia and make it function of approved brand / make, including painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including cutting and making good to the walls and floors wherever required, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 8mm dia C.P. / S.S. Jet (Health Fuacet) with flexible tube upto 1metre long with S.S. triangular plate on walls / Eureopean type W.C. material of approved make and quality, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing white colour wall hung vitreous china battery based infrared sensor operated urinal of approx. size [610 x 390 x 370]mm having pre & post flushing with water (250 ml & 500 ml consumption approx.), having water inlet from back side, including fixing to wall with brackets embedded in cement mortar (1:3), connecting the waste pipe / waste coupling to floor trap with all necessary fittings and accessories like 32mm dia semi-rigid PVC waste pipe (concealed in the wall) including PVC waste fittings, clamps, etc., all complete as per manufacturers specification and direction of Engineer-in-Charge.

Providing, fixing, testing and commissioning trap (floor trap) of approved make with 100mm inlet and 75mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors, connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., all complete as directed by the Engineer-in-Charge.

Constructing masonry Chamber [120 x 120 x 100]cm inside, in brick work of 7.5 class designated in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design, etc., all complete as directed by Engineer-in-Charge.

Constructing masonry Chamber [60 x 60 x 75]cm inside or outside (or approx. size as per site condition), in brick work of class designation 7.5. in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 15mm nominal bore dia C.P. brass bib cock of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00m spacing, necessary reducers, tank adaptors, etc., This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., all complete as directed by Engineer-in-Charge.

15mm dia

20mm dia

25mm dia

32mm dia

Providing and fixing Extrenal exposed Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints, etc., all complete as directed by Engineer-in-Charge.

32mm nominal dia

40mm nominal dia

50mm nominal dia

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms (or nearest availabe size and weight), etc., all complete as directed by Engineer-in-Charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of 1000litres capacity , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes for tank and make operational for supply of water to all floors, etc., all complete as directed by Engineer-in-Charge.

Providing and laying 450mm dia RCC pipe manually or mechanical means Non pressure NP-3 class (Medium duty) R.C.C pipes including collars / spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1Cement :2 Finesand) inlcuding testing of joints and completing the work, etc., all complete as directed by Engineer-in-Charge.

Making connection of drain or sewer line with existing manhole (For pipes 100 to 250mm diameter) including breaking into and making good the walls, floors with cementconcrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain, etc., all complete as directed by Engineer-in-Charge.

Boring, providing and installation bored cast-in-situ reinforced cement concrete piles for Hangar, Annexe, service Buildings with grade M-25 of 450mm dia and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length (as per site requirement) for setting out and removal of same and the length of the pile to be embedded in the pile cap, etc., by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap), etc., all complete as directed by Engineer-in-Charge.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions for fixed and shutters with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, hinges/pivoting ,filling up the gaps at junctions, with dash fasteners and EPDM rubber/neoprene gasket,accessories to oparet the doors,windows,ventilators, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling to be paid for separately) :

Providing and fixing glazing in aluminium door, window, ventilator, louvers, shutters and partitions, etc., With float glass panes of 5mm thickness (weight not less than 12.50 kg/Sq m) along with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge.

Providing and fixing toughened glass panes of 12mm thickness glazing in aluminium door, window, ventilator, shutters and partitions along with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge.

Providing and fixing 12mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows, shutters and partition frames with C.P. brass / stainless steel screws, etc., complete as per architectural drawings and directions of Engineer in-Charge.

WATER PROOFING:Providing and laying integral cement based water proofing treatment with average thickness of 120mm and minimum thickness at khurra as 65mm, including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/Sq m of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-Charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5(1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-Charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs.

Providing and fixing mineral fibre false ceiling tiles at all heights of minimum size [595 X 595]mm of approved texture, design and pattern with 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33mm thick (galvanized @120 gsm) comprising of main T runners of [15 x 32]mm of length 3000mm, cross T of size [15 x 32]mm of length 1200mm and secondary intermediate cross T of size [15 x 32]mm of length 600mm to form grid module of size [600 x 600]mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size [85 x 25 x 2]mm, spaced at 1200mm centre to centre along main ‘T’. The system should rest on periphery walls / partitions with the help of GI perimeter wall angle of size [24 x 24 X 3000]mm made of 0.40mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings, etc., all complete as directed by Engineer-in-Charge.

Drilling suitable holes Upto and including 12mm dia in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades / balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, etc., all complete as directed by Engineer-in-Charge.

Supplying, fabricating, fixing and commissioning in position industrial sliding door /MS sliding door of approximate opening size [24 x 8]M or [36 X 12]M with motorisation and option for manual operation (5-panels each side). The sliding door shutters to be puffed covered on both side with not less than 0.50mm thick sheet with view window of size not less than [500 x 500]mm. The sliding door to be completed with all fittings and fixtures, locking facility, suitable motorisation, guiding sections, rollers, bearings, etc., all complete and including painting with two coats of synthetic enamel paint over a coat of approved red oxide primer, preparation of surface, etc., all complete as directed by Engineer-in-Charge. [Shop drawings to be provided by the agency and to be approved by EIC before execution]. TECHNICAL SPECIFICATIONS 1. Shutters: Modular door shutters designed to withstand wind load and all types of impact load as per IS 875 (Part-3) & IS 800 (LSW). 2. Roller wheels: Each shutter shall be supported at the top and bottom on 2 heavy duty roller wheels of size specially designed to run on top / bottom track. The wheels shall be of EN-9 grade steel as per IS 3177 with shafts & supporting bracket plates. The wheels are of double flanged type and will be in single piece without any tyre. Each wheel shall have two nos of antifriction self lubricating maintenance free ball bearings. 3. EPDM / Neoprene rubber gasket shall be applied in between horizontal & vertical gaps of door leafs and at the centre to make door airtight and dust free. 4. Cleats: Cleats made of MS section shall be fixed on top guide to protect door leafs from falling down in case top wheel fails.

Supply & Apply of 4mm Solvent Free, Self Levelling Epoxy Flooring Surface preparation: - Providing and cleaning all floor surface including wall up to required height to make it free from dirt, dust, loose particles, wax, polish, efflorescence, laitance, curing compound and other contaminants by using wire brush, grinding all sharp edges to make it flush with the surface, etc., complete as per manufacturer's specification Priming :- Providing and applying of Apcoflor HFP 120/130, Two component, high solid, epoxy resin based floor primer of 10 Kg Pack size using a brush or short / medium pile roller to achieve thickness of 100microns with consumption of 0.15kg/Sq m by mixing Base : Hardener in ratio of 65 : 35 Screed :- Providing and applying of Apcoflor LSC 3 XL, Three component, epoxy based, high strength, self levelling screed of 15 Kg Pack size upon the applied primer to achieve thickness of 2mm with consumption of 5.82Kg/Sq m by mixing Base : Hardener : Aggregates in ratio of 20 : 10 : 70 Compressive Strength (ASTM C 579) 41 MPA, Flexural Strength (ASTM C 580) 10 MPA Tensile Strength (ASTM C 307) 8 MPA, Pull off Adhesion (ASTM D 4541) >1.5 MPA (Concrete Failure) Top Coat:- Providing and applying of Apcoflor SL 2, Three component solvent free, self levelling epoxy Top Coat, which is hard wearing & chemical resistant, Confirming to Global Migration Standards laid down in US-FDA: 21CFR 175-300, of 10 Kg Pack size upon the applied screed to achieve a thickness of 2 mm with consumption of 3.2Kg/Sq m by mixing Base : Hardener : Aggregates in ratio of 34 : 14 : 52 Compressive Strength (ASTM C 579) 51 MPA Flexural Strength (ASTM C 580) 12 MPA Tensile Strength (ASTM C 307) 8 MPA Make :- Asian Paints, BASF, FOSROC or equivalent.

Supplying and fixing in position factory insulated sandwich panel for Roofing / cladding minimum 80mm thick with facings made up of pre-painted galvalume, not less than 0.50mm thick (TCT) on top and 0.50mm thick on the bottom with 550 Mpa yield strength. The core material shall be made up of rigid polyisosyrene foam (PIF) conforming to IS 12436 and of density around 40 ± 2 kg/m³ fixed with self tapping screws incuding necessary supplementary fittings, butyl tape, joint fillers, joint laps, making provision for accessories, necessary cutouts / openings, supports for joinery as required, etc., along with the PUF end caps and all exposed surfaces are protected with masking 80mm Thk core PIR and 120mm Thk overall thickness include crest, etc., all complete as per manufacturer's specification and as directed by the Engineer-in-Charge. Note : (i) Refer detailed technical specifications. (ii) The quoted rate shall be inclusive of overlaps and wastages. (iii) A performance guarantee bond for 10 years for leak proof roofing shall be given by the contractor on non-judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 10 years from the date of completion of contract / project as a whole.

Supplying and fixing Motorized G.I. rolling shutter of approved make and made of required approx. size [3 x 2]m. The curtain shall be constructed from Tata Bluescope / JSW 150 gsm single skinned galvalume steel laths with natural finish of min. 1.25mm thickness and interlocking distance of min 75mm. Side guides shall be made of min. 2 or 3.15mm thick heavy duty TG Galvanised steel, as per the site requirement, along with necessary fixtures like cleats (spacing shall not exceed 0.75m) or supports brackets for attachments to the walls or column by screws or bolts and necessary seals. The size of the guide channels shall be conforming to Is:6248-1979. Single piece G.I. Heavy duty mild steel suspension shaft along with roller of sufficient diameter with springs shall be provided along with necessary hexagonal bracket plate of min 3.15mm thickness, size conforming to Is:6248-1979 and square bar, if necessary. The provision of Pressed galvalume steel hood cover with reinforced bracket as required to suit the shutter width and motor cover with natural finish of minimum 0.90mm thick and of reuired shape along with necessary fixtures and stiffeners like angle cleats, angle or flat stiffeners, etc., shall be provided. Bottom profile shall be of G.I. plate with angle stiffner. The bottom rail shall be fixed with extruded rubber bottom seal that shall seal against the floor when the door is fully closed. The CE Certified CRS Compact Gear motorised system shall be indirect drive type along with system power supply wired with industrial plug and three station push button / switch with deadman control and arrangements for inside and outside locking.

Main LT panel

Supply, Installation, Testing & commissioning of Main LT Panel(IEC 61439 Standards)

Incoming

1No- 630A, 415V gr. 50KA 4P MCCB. Microprocessor based including MODBUS TCP/IP communication interface module.

Lot - 800A TP + 400A N, 415V, short circuit rated 50KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

1 Set-630/5A current transformers of suitable class and VA burden for metering.

1No 32 A 415V gr TP 50KA MPCB of for tapping power for metering and control circuit

1Set - RYB indicating lamps of LED module with 6A, 230V,10KA, SP MCB.

1Set- 6A, 230V, 10KA SP MCB for the protection of measuring instruments.

Outgoings:

1No - 320A, 415V gr. 50KA, TPN MCCB with adjustable with thermal settings(80% to 100%)

1No - 200A, 415V gr. 50KA, TPN MCCB with adjustable with thermal settings(80% to 100%)

1No - 160A, 415V gr. 36KA breaking capacity, TPN MCCB

2Nos - 100A, 415V gr. 36KA breaking capacity, TPN MCB

7Nos - 63A, 415V gr. 10KA breaking capacity, TPN MCB

3Nos - 40A, 415V gr. 10KA breaking capacity, 4P MCB

2Nos - 32A, 415V gr. 10KA breaking capacity, TPN MCB

Sub LT Panel

Incoming

1No- 320A, 415V gr. 50KA 4P MCCB. Microprocessor based including MODBUS TCP/IP communication interface module.

Lot - 400A TP + 200A N, 415V, short circuit rated 50KA for 1sec, Aluminium bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

1 Set-320/5A current transformers of suitable class and VA burden for metering.

1No 32 A 415V gr TP 50KA MPCB of for tapping power for metering and control circuit

1Set - RYB indicating lamps of LED module with 6A, 230V,10KA, SP MCB.

1Set- 6A, 230V, 10KA SP MCB for the protection of measuring instruments.

Outgoings:

6Nos - 63A, 415V gr. 10KA breaking capacity, TPN MCB

8Nos - 32A, 415V gr. 10KA breaking capacity, TPN MCB

Supply, Installation, Testing & commiissioning of OUTDOOR TIMER PANEL

1No- Modular digital time switch for street light & Building light control of Legrand Alpha Rex 3 D21 or equivalent approved make with two channel daily cycle unit suitable for daily programming to switch ON & OFF and operate on 230V single phase supply.

1No- 32A 230V gr.10KA 4P MCB with overload and short circuit protection.

1No-25A, Power contactor with AC coil of L&T Cat.No.MNX22 for 230V Single phase supply.

3Nos, 16A, 230V Gr, 10KA SP MCB with overload and shortcircuit protection.

320KVA LT DG set with AMF panel

Supply, fixing to/suspending from existing MS perlins/ ceiling at approx. 12-14 mtr height, including using suitable MS angle frame work with required fixing hardwares etc., as per site requirement, testing & commissioning of industrial type highbay LED lighting fixture of wattage not exceeding 150watts made out of high pressure diecast aluminium housing, diffuser made of high grade toughened glass, integral control gear, eye hook etc., (as per OEM standards). The technical parameters of lighting fixtures are as below: The luminaire should have Lumen efficacy ≥ 110lm/watt and lumen output not less than 16500lumens, PF>0.90 and Colour temprature shall be ≥5700K, THD <10%, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures and other standard accessories complete in all respects and as directed by Engineer in-charge. The fitting shall be of Crompton model no: TIP-320-100-57-SL-GL-NSG/ Equivalent model in other approved makes. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminares & LM80 certificate for LED shall be produced.

Supply, fixing in flush with the false ceiling including suitable fixing arrangment using Chain links, testing & commissioning of recess mounting type square(2'X2') LED lighting fixture of wattage not exceeding 36watt made out of white powder coated CRCA housing/ aluminium housing, front frame with translucent /polycarbonate cover including control gear. The luminaire should have Lumen efficacy ≥100 lm/watt and lumen output not less than 3600lumens with PF >0.9 and Colour temperature shall be ≥5700K operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections and other standard accessories complete in all respects and as directed by Engineer incharge. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminaires & LM80 certificate for LED shall be produced.The LED Light fixture shall be of Crompton model no:LCTLRNE-36W-FO-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.

Supply and fixing in flush with the false ceiling testing & commissioning of round type recess mounted LED downlighter with aluminium die-cast body, finish with premium white powder coating, wattage not less than 18W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, Colour temprature shall be ≥5700K, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. LM79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. of Crompton model no:LSCRM-18W-CDL /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.

Supply & fixing on the building at a height of 5-8mtr approx. including supply and fixing GI pipe bracket made out of 40mm dia class B GI pipe of 1.5Mtrs long bent to shape with necessary fixing hardwares etc., to fix on building and testing & commissioning of building light LED light fixture of wattage not exceeding 70watts and lumens output not less than 7000 lumens with necessary interconnections consisting of pressure die cast aluminum housing, optical cover made out of heat resistance toughened clear glass / polycarbonate with IP66, luminous efficiency ≥100lm/w at luminaries level, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5600K+400K, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-change. The luminaries shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.95. LM 79 certification for luminaries & LM80 certificate for LED shall be produced. Any approved make fitting meeting the above technical specification has to be supplied.The LED Light fixture shall be of Crompton model no:CRP-409-70-57-SL-GL-NSG /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.

Supply and fixing in flush with the false ceiling testing & commissioning of round type recess mounted LED downlighter with aluminium die-cast body, finish with premium white powder coating, wattage not less than 12W LED lighting fixture, lumens efficiency ≥ 100lm/w at luminaire level, operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V. LM79 certification for luminare & LM80 certificate for LED shall be produced. including control gear, power factor of control gear shall be >0.90. of Crompton model no: LSCSM-12W-CDL /Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL.

Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten type 2X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum 100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 2 Nos of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.2XT8+LT8-20-865-(2) /Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.

Supply, fixing directly to the ceiling/wall using suitable mounting arrangements testing & commissioning of surface mounting Decorative type 10W LED mirror light fitting, including driver, the driver shall have PF >0.9 and Colour temprature shall be ≥5700K, THD <20% operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections complete in all respect and as directed by EIC. The lighting fixture shall be Bajaj make Model-BCLSB 10W WH/Equivalent make in other approved makes.

Supply, fixing directly to the ceiling/wall testing and commissioning of 10W LED bulkhead light fitting with die cast aluminium body with Poly carbonate front cover, including driver, the driver shall have PF >0.9 and Colour temprature shall be >5600K, IP65 rated THD <20% operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections between driver and lighting fixtures complete in all respect and as directed by EIC. The lighting fixture shall be of Crompton model no: LBHE-10-WW/Equivalent make in other approved makes.

Supply & fixing on existing MS hook 1200mm sweep, Five star rated with brushless direct current motor(BLDC) Ceiling fans complete with blades, down rods, and accessories, 230V single phase 50Hz AC supply. Minimum air delivery 210cu.m/min with service value 6.00 BEE , erected in position with necessary flexible copper leads of required colour and with canopy, down rod 300mm to 600mm length as per site requirement , necessary rubber bushings, clamps nuts,bolts etc., complete in all respects and as directed by Engineer-in-charge.

Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.

Supply, installation, testing & commissioning of 600mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.

Supply, installation, testing & commissioning of 750 mm dia Air Circulator Fan along with three speed regulator of any approved make connecting cord with 6A, 3 pin plug top and with all necessary accessories, etc., complete in all respects and as directed by Engineer-in-charge.

Distribution Boards

8 way , Double door VTPN MCCB DB

6 way , Double door VTPN MCCB DB

6 way (4 + 18), Horizontal Double door MCB DB

4 way (4 + 12), Horizontal Double door MCB DB

12 way , Double door SPN MCB DB

8 way , double door SPN MCB DB

MCCBs, MCBs & RCBO

200A, 36KA, FP 415V, MCCB

100A, 36KA, FP 415V, MCCB

40-63 amps. ratings , 4P MCB, "C" curve, 10 KA breaking capacity.

32 amps. ratings, TPN MCB, "C" curve, 10 KA breaking capacity.

32A, ,4P, 300mA, RCBO, "C" curve, 10 KA breaking capacity.

63 amps. ratings, TP MCB, "C" curve, 10 KA breaking capacity.

6A to 32A TP MCB 10kA , C Curve

6A to 32A DP MCB 10kA , C Curve

6-32 amps. ratings , SP MCB, "C" curve, 10 KA breaking capacity.

MS Power Coated Enclosure with cover for fixing Four/three/single pole(including dummies) MCB fabricated of minimum 16 gauge sheet steel to be fixed inflush with wall/surface mounted as per site requirement.

Supply, laying, testing & commissioning of following size LT armoured/unarmoured power cables.

3.5 CX 300 Sqmm Aluminium armoured conductor.

3.5CX 120 Sqmm Aluminium armoured conductor

3.5CX 50 Sqmm Aluminium armoured conductor

3.5 CX 25 Sqmm Aluminium armoured conductor.

4 CX 16 Sqmm Aluminium armoured conductor.

4CX 10 Sqmm Aluminium armoured conductor

3CX 4 Sqmm Copper Armoured conductor.

3C X 2.5 Sqmm Copper armoured conductor

Supply and connecting indoor type cable end joints for the following size 1.1 KV gr., PVC insulated and PVC sheathed / XLPE Aluminium(Al)/ Copper(Cu) conductor armoured (Arm)/un armoured(un Arm) LT UG cables by employing necessary glands, terminals(Al/Cu), bolts & nuts etc., complete in all respects and as detailed below:

3.5 X 300 sq. mm Al arm cable

3.5 X 120 sq. mm Al arm cable

3.5X 50 sq. mm Al arm cable

3.5 X 25 sq. mm Al arm cable

4 X 16 sq. mm Al arm cable

4 X 10 sq. mm Al arm cable

3C X 4 Sqmm Copper Armoured LT Cable End Joint

3C X 2.5 Sqmm Copper Armoured LT Cable End Joint

Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)

Wiring to single light/fan point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.

Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.

Wiring to three light point controlled by 1 No 6A, 250V gr. flush modular type SP switch complete in all respects.

Wiring to exhaust fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for twin control light point(for two lights) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2sets of 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

3 x 2.5 sq. mm (For lighting ckt from DB to Switch box, For 6A power Points)

3 x 4 sq. mm(For 16A power points & 20A powerpoints)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20MM PVC Conduit

25MM PVC Conduit

32MM PVC Conduit

Supplying and fixing of Hot dip galvanised Perforated type cable tray of following sizes, steel: As per IS:2062 / 1079, Galvanising : As per IS: 2629 / 4759 including all accessories like base slotted angle, horizontal elbow, horizontal tee, horizontal cross, horizontal reducer, vertical elbow up, inside, vertical elbow down, outside, coupler plate, fasteners etc., and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures upto a height of 10-12 mtrs from FFL., complete in all respects and as directed by Engineer in charge

Supplying and fixing of 100 x 50 x 1.6mm size Hot dip galvanised Perforated type cable tray

Supplying and fixing of 150 x 50 x 1.6mm size Hot dip galvanised Perforated type cable tray

Supplying and fixing of 300 x 50 x 1.6mm size Hot dip galvanised Perforated type cable tray

Supply and fixing of weather proof cable junction box with terminals of size 104 mm x 104 mm x 70 mm Hensel Cat. No. DK 0402G or equivalent in Legrand/ Schneider/ Hagar make only. The Box shall be mounted at suitable height on the MS truss/wall/pole using suitable size MS angle frame work with painting as per EIC, with cable entry knock-outs, including rigid support for all components, required fasteners totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-65 complete in all respects and as directed by Engineer-in-charge.

Earthing & lightning protection

Supply & providing earth stations using 600x600x3.15mm thick copper plate electrode complete at 2.5 mtr. below the ground level with 20mm dia class B G.I pipe for watering, G.I funnel etc. & Cement concrete base of minimum size 750x750x100mm thick shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc. and providing cement concrete chamber of inside dimension 300x300x300mm with a wall thickness of 120mm using 1:2:6 CC above the base concrete including providing 50mm thick RCC cover including required salt & charcoal, 2runs of 50x6 mm(300mm) copper strip from plate electrode upto top of the chamber etc. as per technical specification enclosed with the tender documents & as per IS 3043 complete in all respects[For existing Transformer neutral earthing].

Supply & providing GI earth stations using 600 x 600x 6.3 mm thick G.I plate electrode at 2.5 mtr. below the ground level with 20mm dia class B G.I pipe for watering, G.I funnel etc. & Cement concrete base of minimum size 750x750x100mm thick shall be provided using 1:2:6 CC after necessary excavation, refilling of soil, consolidating, ramming, leveling of soil etc. and providing cement concrete chamber of inside dimension 300x300x300mm with a wall thickness of 120mm using 1:2:6 CC above the base concrete including providing 50mm thick RCC cover including required salt & charcoal, 2 runs of 50x6 mm G.I strip from plate electrode upto top of the chamber etc. as per technical specification enclosed with the tender & as per IS 3043 complete in all respects.

Supply, fixing & connecting the 50X6mm size G.I strip on wall / clamping to the existing duct wall / fixing on steel structures/ laying 2 ft. below the ground level with necessary excavation, concrete cutting & re-concreting, refilling, consolidation & levelling of soil after laying for interconnection between the earth pits and the LT panels earthing as directed by Engineer-in-charge. Note:- Excavation, concrete cutting & re concreting will be measured separately.

Supply, fixing & connecting the 40X6mm size Copper strip on wall / clamping to the existing duct wall / laying in cable tray/ laying 2 ft. below the ground. level with necessary excavation, concretecutting & re-concreting, refilling, consolidation & levelling of soil after laying for interconnection between the earth pits and for earthing purpose as directed by Engineer-in charge. Note:- Excavation, concrete..cutting & re-concreting will be measured separately.

Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supply & fixing on the top of the building 3 pronged lightning conductor finials fixed on 20 mm dia copper tube 2 mtrs. long with Copper plate base 300x200x5mm thick. Base & fixing arrangements for the down conductors/GI strip complete in all respects and as directed by the Engineer-in-charge. Note: Base to be installed on porcelian insulators.

Supply, fixing & connecting the 25x3mm(75 sqmm) size G.I strip on parapet wall / clamping to the existing duct wall / fixing on cable tray/ clamping on wall with suitable size epoxy insulators at a spacing of minimum 0.8mtr (between 2 insulators) including fixing hardware complete in all respects and as directed by the Engineer-in-charge.

Supply & spreading 75mm thick sand cushioning on top & bottom of the two runs of cable and covering the cable by well burnt bricks on sides and top of the cables as per technical specifications enclosed and as directed by the Engineer-in-charge.

Excavation in all types of soil for Cable trench including refilling, consolidating of soil after laying the cable including ramming and levelling to smooth finish as per the Technical specifications enclosed and as directed by the Engineer-in-charge.

Demolishing Cement Concrete manually/machanical means including disposal of material within 50 metres lead as per direction of Engineer in charge

Nominal Concrete 1:3:6 or richer mix (including equivalent design mix)

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing,and reinforcement-All work up to plinth level:

1:2:4 (1 cementy: 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Design, Fabrication, Supply and fixing/grouting in wall/ceiling of suitable size MS angle iron supports/ flat/ brackets for cable tray supports, high bay light fixture supports and etc., as per site requirement and painting the same with two coats of synthetic enamel paint over a coat of zinc chromite primer complete in all respects and as directed by EIC/OIC.

Supplying and laying of 125mm PN8, PE-80 HDPE pipe confirming to IS 4984:1995 with necessary connecting / welding sockets / couplings / Tees/Bends in the excavated trench/duct/at road crossings for encasing cables. Any reputed make with ISI mark. complete and as directed by Engineer-in-charge.

Data Items & CCTV items

Supply, fixing and programming of Managed Layer 2 network switch with 48 ports, RJ-45 autosensing 10/100/1000 ports, 4 SFP+ ports complete in all respects as per the details broughtout in technical specifications and as directed by Engineer-in-charge. Approved Make : Cisco/ HP/ Juniper/ Dlink / Netgear/ Extreme/ Allied Telesis

Supply, Installation,Testing and Commissioning of Minimum 1G SFP Transreciver for Fiber uplinks (Transreciver as to be same OEM of switch only) Complete in all respects as directed by Engineer-in-charge. Note: For providing uplink from existing switch, make shall be as per existing switch.

Supply and laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/ iron supports/HDPE pipe, of 12 core Single Mode armoured, loose-tube, Gel-filled, 9/125 micron Fiber Optic cable, including OTDR testing and submission of test reports for OFC cable complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX

Supply and fixing of wall Mountable 15U Network Rack with 2 nos of 6/16A Power Distribution unit and Dual cooling Fan, earthing cable, hardware etc. with all standard Accessories, complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make:APC/VALRACK/NETRACK/RITTAL

Supply and fixing of fully Loaded, 48 Port CAT6 UTP Jack Panel, including termination of CAT 6 cables in Jack panel labelling complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX

Supply and fixing of fully Loaded, 24 Port CAT6 UTP Jack Panel, including termination of CAT 6 cables in Jack panel, labelling complete in all respects as per technical specification and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX

Supply and fixing of Fully loaded 12 Port LIU fiber LC style singlemode, 19-inch Rack mount panel with adapter plates, fiber pig tails, connectors including splicing and labelling. complete in all respects and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX

Supply and fixing of Fully loaded 24 Port LIU fiber LC style singlemode, 19-inch Rack mount panel with adapter plates, fiber pig tails, connectors including splicing and labelling. complete in all respects and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX

Supply, fixing and labelling of Fiber Optic Patch Cord (LC-LC) SM Type - 2 meter, complete in all respects and as directed by Engineer-in-charge. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX

Supply, fixing and labelling of Cat 6 UTP 4-Pair 2Meter length Patch cord, complete in all respects as per technical specification. Approved Make: COMMSCOPE TYCO/ PANDUIT/ MOLEX.

Supply, Installation,Testing and Commissioning of 1 KVA UPS 1Phase input & 1Phase output for Network & server rack: i) 1 KVA UPS ii ) Input Voltage Range - 140-300V AC iii) Input Frequency - 50 Hz iv) Output Voltage - 230V± 10 AC v) Cord Length :1.5 mtr (min) vi) Maintenance-free sealed, leakproof Battery with battery stand vii) Full Protection - Discharge, overcharge, and overload protection viii) Auto restart while AC power recovery ix) ROHS Complied x) Power backup of minimum 30 minutes at full load xi) Network manageable :Provides remote power management of the UPS over the network. Complete in all respects as directed by Engineer-in-charge. Approved Make: Emerson, APC, Vertiv

Supply, drawing and testing of Cat 6 UTP 4-Pair cable in the existing PVC conduits / wall / above false ceiling, including necessary interconnections for LAN & Internet point as directed by Engineer-in-charge.

Supply, Fixing in flush with wall/on Aluminium partition as per site condition, testing & Commissioning of 2 nos of RJ-45 modular type sockets for Data points including supply of suitable size modular MS/PVC surface mounting box with base plates, glossy finish front covers, labelling etc., with necessary interconnections and chipping the wall, replastering to smooth finish etc., wherever required complete as directed by Engineer-in-charge.

Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR PTZ Camera with auto tracking, 1/2.8" CMOS, 5 MP @ 30fps, 30x zoom 4.7~141mm, IR 200m (Colour 0.005 lux @ F1.2), WDR 120db, ONVIF support, Compression : H.265 or Better, Local Memory in camera/ SD card :64 GB Memory (Minimum), IP 66 rated protection against dust & heavy rain, Vandal Resistance rating : IK10 (Minimum) Power Supply : POE / Dual Power Source (PoE + Input Power Option ), Complete in all respects as directed by Engineer-in-charge. Make:- Honeywell/ Bosch/Sony/ Panasonic.

Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Outdoor Box/Bullet type fixed Cameras, 1/2.8" CMOS, 2 MP @30fps, lens 2.7 [email protected], IR30 (Colour 0.002 @ F1.2), ONVIF support, Local Memory in camera/SD card :64 GB Memory (Minimum), WDR 120dB, IP 66 rated protection against dust & heavy rain , Vandal Resistance rating : IK10 (Minimum) , Power supply : PoE Mandatory/ Dual Power Source (PoE + Input Power Option ), Complete in all respects as directed by Engineer-in-charge. Make:- Honeywell/ Bosch/Sony/ Panasonic.

Supply and fixing of Wall Mount or Pole Mount Accessories with 0.5mtr arm length bracket for fixing the PTZ and Bullet Camera with corrosion proof paint including necessary hardwares as per site condition. Complete in all respects as directed by Engineer-in-charge.

Supply, Installation, Testing & Commissioning of 32 channel Network Video Recorder (NVR): i) IP Camera Input : 32 Channel ( Along with Licenses for minimum 32 Channel) 256 Mbps incoming and 256 mbps out going bandwidth (when RAID is enabled), synchronous playback 32*(30fps @720p) ii) Internal Storage :minimum 48TB Storage (Vendor shall supply compatible Hard disks with NVR ) ( supported Raid 1,5,6,10) iii) Network : 2 Nos Gigabits Ethernet Ports iv) Interoperability : supporting ONVIF v) Compression : H.265 or Better vi) Trigger Events action : Recording, Alarm Out, Video Push, Email, Snapshot, Buzzer and Screen Tips vii) Compatibale Video Management & Analytics Software ( VMS) should be Pre-installed in NVR. viii) All required features /functions in Video Management & Analytics Software must be Licensed & enabled ix) VMS Functions : Recording ,Event handling, motion detection, Video Search, Tripwire, Intrusion Detection, Motion Detection, Camera control x)Recording Mode: Continuous recording, by trigger (motion or alarm), by schedule . xi) The NVR should be built on the open standards and shall be compatible with different CCTV Camera from industry leading manufacturers. xii) User friendly Camera control & storage Management by VMS Complete in all respects as directed by Engineer-in-charge.

Supply, Installation,Testing and Commissioning of 8 Port Gigabit Ethernet PoE+ Managed L2 Switch with 2 SFP ports: i) Minimum 8 RJ-45 autosensing 10/100/1000Mbps POE+ Ports ii) 2 x 1G (Min) SFP ports iii) Min 20 Gbps of switching capacity iv) Min 14 Mpps Switching throughput v) Console Ports : RJ45 Ethernet vi) Form Factor : rack-mountable vii) IPv4 & IPv6 support :Yes viii) PoE Budget : 120W (Minimum) ix) The offered switches should not be declared end of life/sale (EOL/EOS) x) Full-featured Web Management Console x) Security feature : VLAN , ACL , MAC Port security xi) Approved Make: Cisco / HP Aruba / Juniper/ Dlink/ Netgear/Extreme/ Allied Telesis

Supply, Installation,Testing and Commissioning of Monitoring Desktop at security gate at New site- i) CPU: Intel Core i5-2400,3.1GHz or better ii) Mother Board : Suitable intel chipset iii) Memory : 6 GB DDR 4 or better iv)Hard drives 1 TB or more v) Key boards: USB Keyboard vi) Mouse: USB Optical Mouse with scroll vii) Network Adapter : Integrated 10/100/1000 Base-T viii) Graphic: integrated Graphics with minimum 1 GB memory ix) DVD Writer: 8x or better x) Operating System : Windows 10 Professional (or better) compatible xi) Minimum 27'' inch HD LED Monitor xii) Preferred Make: HP / DELL / Lenovo / Acer

Supply & fixing of Cat 6 UTP RJ45 Connectors. Complete in all respects as directed by Engineer-in-charge. Approved Make:COMMSCOPE TYCO/ PANDUIT/ MOLEX

Supply and installation of 55" ULTRA HD LED TV of high Resolution with slim design with HDMI ports, VGA input, Compatible Wall Mounting fittings , remote, power & input cables , HDMI cable, wall/floor mounting stand etc., Complete in all respects as directed by Engineer-in-charge. Make:- LG / Sony / Samsung / Panasonic

Supply and installation of 75" ULTRA HD LED TV of high Resolution with slim design with HDMI ports, VGA input, Compatible Wall Mounting fittings , remote, power & input cables , HDMI cable, suitable converter and wall/floor mounting stand if any etc., Complete in all respects as directed by Engineer-in-charge. Make:- LG / Sony / Samsung / Panasonic

Supply and laying of 32mm dia size PN8, PE-80 HDPE pipe of approved make confirming to IS 4984:1995 with necessary connecting / welding sockets / couplings / Tees/Bends in the excavated trench/duct/at road crossings for encasing OFC cables complete and as directed by Engineer-in-charge. Approved Make: Rishi/Hasti/equivalent mark with ISI mark as per standards

Voice Items

Supply, Fixing, in flush with wall as per site condition, suitable size modular GI box/PVC box as per site requirement with base plate, glossy front cover for supply and housing of 1 No. of Twin RJ-11 telephone socket outlets with shutter including necessary interconnections, chipping the wall and replastering to smooth finish to match the existing wall wherever necessary as per site condition. Complete in all respects and as directed by Engineer-in-charge.

Supply & drawing of 0.5 mm dia copper conductor PVC insulated 5 pair colour coded and unarmoured telecommunication cables in the existing PVC conduit as per standard practice including necessary inter connections & end terminations.

Supply & fixing on wall/grouted to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 10 pair krone type telephone connector junction box including krone connector with necessary mounting frame housed in suitable size FRP box with hinged lockable cover complete in all respects.

Supply & fixing on wall/grouted to floor upto 1200mm above ground level as per site requirement using suitable size MS angle iron frame work finished with two coats of enamel spray paint over a good primer & providing 50 pair krone type telephone connector junction box including krone connector with necessary mounting frame housed in suitable size FRP box with hinged lockable cover complete in all respects.

Supply, laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/iron structure using suitable clamps etc./ encasing in pipe, testing and commissioning of 10 pair jelly filled armoured copper conductor of 0.5mm dia polyethylene insulated cover, twisted into pairs, colour coded, pairs laid up, fully filled with petroleum jelly as a moisture barrier, core wrapped with non-hygroscopic polyester tape to contain the jelly, covered with aluminium poly-laminates screen, polyethylene sheath extruded over aluminium screen, polyethylene tape over the above sheath, armoured with galvanised steel tape and outer polyethylene sheath underground telecommunication cable including both end terminations on the existing krone type junction box complete in all respects.

Supply, laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/ steel structure using suitable clamps etc./ encasing in pipe, testing and commissioning of 50 pair jelly filled armoured copper conductor of 0.5mm dia polyethylene insulated cover, twisted into pairs, colour coded, pairs laid up, fully filled with petroleum jelly as a moisture barrier, core wrapped with non-hygroscopic polyester tape to contain the jelly, covered with aluminium poly-laminates screen, polyethylene sheath extruded over aluminium screen, polyethylene tape over the above sheath, armoured with galvanised steel tape and outer polyethylene sheath underground telecommunication cable including both end terminations on the existing krone type junction box complete in all respects and as directed by EIC.

INTELLIGENT FIRE ALARM SYSTEM

Two Loop fire Panel as detailed above.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) of suitable range(min 45mtr) required for the dome/simulator are complete with emitter and receiver including connections with remote test features etc., complete as required.

Supply and installation of PVC type response indicators with LED indications for above false ceiling detectors and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be UL / FM / Vds approved.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supply,Installation, testing & commissioning of Triple sensor Flame Detectors with UV/IR detection capacity with Flame proof / Explosion proof enclosure type ,Flickering LED, 4 wire system. 2 wire for Input Supply & 2 wire suitable to connect standard Fire Alarm as per technical specification and shall comply to BS-5839/EN54/IS2189 standards for installation and product shall be EX & IEICEx Approved.

Supply, installation, integrating with the existing main FACP, testing & Commissioning of Auto dialer with addressable control module connected to main control panel with minimum 10 telephone nos. connectivity working on 24volts supply including connected cabling/wiring complete in all respects, as per technical specification.

Supply, laying and fixing directly to the ceiling/on wall / above false ceiling/cable duct/truss etc, testing & commissioning of 2 Core X1.5 sqmm copper XLPE insulated FRLS with ISI mark armoured RED colour LT cable along with required accessories, terminations glands, as directed by EIC to complete the installation as per the technical specification.

Design, fabrication, supply, installation, testing and commissioning of machine room less electric traction type, Stainless steel elevator of 8 passenger (544kg) capacity and suitable for operation on 415 V±10%, 3 phase, 50Hz AC supply, having AC variable voltage and variable frequency type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, Simplex operation, operating panel with luminous buttons, overload waming indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up to HAL's EPABX, infrared ray sensing door protection for full height reverse phase relay on controller, fireman's switch at initial landing floor, Dot matrix digital display indication of positions and direction indication in car and landings, and at all floors with UP/DOWN direction, braille buttons, audio announcement along with prerecorded message, LED light fixtures, ventilation fan, etc. complete with all accessories including Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device with lever operated (button operated) (independant of any battery system) along with structural supports, frames etc. complete as required. The traction motor of machine room less elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification having automatic centre opening Stainless steel door, car enclosure provided with stainless steel handrails on two sides, 20mm±2mm thick granite

Design, fabrication, supply, installation, testing and commissioning of machine room less electric traction type, Stainless steel elevator of 8 passenger (544kg) capacity and suitable for operation on 415 V±10%, 3 phase, 50Hz AC supply, having AC variable voltage and variable frequency type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, Simplex operation, operating panel with luminous buttons, overload waming indicator, battery operated alarm bell, LED type emergency light, intercom suitable for hook up to HAL's EPABX, infrared ray sensing door protection for full height reverse phase relay on controller, fireman's switch at initial landing floor, Dot matrix digital display indication of positions and direction indication in car and landings, and at all floors with UP/DOWN direction, braille buttons, audio announcement along with prerecorded message, LED light fixtures, ventilation fan, etc. complete with all accessories including Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device with lever operated(button operated) (independant of any battery system) along with structural supports, frames etc. complete as required. The traction motor of machine room less elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification having automatic centre opening Stainless steel door, car enclosure provided with stainless steel handrails on two sides, 20mm±2mm thick granite flooring as applicable in accordance of

Design, Supply, erection, testing and commissioning of minimum 14HP capacity Air-cooled variable refrigerant volume/variable refrigerant flow(VRV/VRF) modular type Outdoor unit mounted on suitable MS angle frame for connecting multiple indoor units of different capacities including suitable size communication copper control wiring up to each indoor units, energy efficient inverter driven rotary/ Scroll compressors of EER(W/W) not less than 3.26, 3 phase, 380-415 V, 50Hz AC power supply input including microprocessor control panel, starter controls for all compressors and condenser fan motors along with internal control and power wiring, cooling coil with internally interconnected refrigerant pipes, charging port and the entire unit shall be with weather resistant powder coating paint for continuous outdoor operation, all other required accessories, & hardware’s, full charge of eco friendly R 410A/R407 /R32 Refrigerant, safety devices and all other standard accessories etc., The scope includes power & copper control cabling between IDU and ODU along with all associated accessories, complete in all respect as per technical specification and as instructed by the Engineer-in-charge. MS frame work for mounting unit will be included in the scope. Note: 1)Power supply to 14HP unit will be provided near ODU to tap power supply.

Design, Supply, erection, testing and commissioning of minimum 2.0TR capacity, Four directional/ Rounded air flow Cassette type Indoor Air Conditioning Units suitable for mounting inside false ceiling, each comprising of cooling coil, blower with multi speed motor, electronic expansion valve, supply & return air grilles, filter, insulated connection of refrigerant circuit, provision for fresh air intake, condensate water drain pump with electronic level sensor, including suitable size LT copper cable connecting to the nearest existing plug & socket, necessary mounting arrangement for suspending the unit from ceiling etc. All the indoor units shall be compatible to work with VRV / VRF type above condensing unit. Scope includes Remote controller (Cordless) for each following units including batteries and necessary cutting of existing false ceiling Note: Power supply to individual indoor unit will be provided near to IDU to tap power supply.

Design, Supply, erection, testing and commissioning of suitable size hard/soft refrigerant copper pipe as required with required pipe fittings and accesories like bends,Tees, reducers, Y-Joints/Refnets, suction filters, filter drier and couplings by good quality pipe joints which laid between ODU and IDU (AHU/Cassette). The Minimum copper pipe gauge shall be as per the gauges indicated by manufacturer. The Pipe sizes to be used as per OEM design recommendation. The Refrigerant pipe shall be insulated with Class O nitirle rubber of 19 mm thick for Gas line and 19 mm thick for liquid line. The piping shall be laid on walls / roof / ceiling well supported at specific intervals with metallic support, Cable tray with cover and required hardwares etc., for fixing copper pipes. All the necessary accessories, jointing / brazing etc shall be carried out as required..The pressure testing of refrigerant piping has to be done as per manufacturer design recommendation. All the copper fittings shall be suitable for R 410 A/R 407/R-32 refrigerant. Refer IDU/ODU layout tender drawing. Make: Mandev/Piyush/Totaline

Design,supply,Installation testing & commissioning of suitable sizes as per OEM recommonadation not less than 2mm thick CPVC drain water / fresh air arrangement pipe including U-traps, vlaves for AHU drain,reducer, bends, collars & elbow etc, all complete and duly insulated with 9 mm thick tubular insulation of closed cell elastomeric nitrile rubber as required.The PVC drain water pipe/fresh air pipe shall be complete with fittings, accessories and duly insulated using bends, elbows, tees, wall sleeves, hangers, supports, anchors etc.(Note:.1 Pipe used for fresh air intake to IDU shalll be coverd with mesh. 2. Necessary wall openings and closing the same using cement mortar and matching paint finish after taking out pipes is included in the scope of work.) Make: Supreme/Finolex/Hycount/Saroplast

Supply, installation, testing and Design, Manufacturing, transport, Erection, Testing and Commissioning of 5 Ton capacity box type double girder, E.O.T crane with a span of 35mtrs (approx), lift height of 8mtrs, bay length 41 mtrs(approx) complete in all respect and comprising of crab hoist, electrical controls, cabling, Anti-collision device between proposed cranes as per standard practice and other required accessories as per annexure-I in technical specifications and as directed OIC/EIC. .

Supply, Fixing, Testing and Commissioning of shrouded bus bar 125A- 4 row GI DSL system with all required accessories complete in all respects and as per the technical specifications Annexure-I and as directed OIC/EIC.

Design, Supply, Erection and commissioning of 50 MM bright Square bar for above crane with all necessary accessories complete in all respect on both sides to a bay length of 41 *2 sides = 82 mtrs(Approx).

Design, supply, installation, testing and commissioning of vertical type Air Reciever of 1000 liters capacity suitable for a working pressure of 10bar, as per IS2825 ASME section VIII Div complete with pressure guage, safety valve, manual drain, flanged inlet and outlet shall be 80 Nb, inspection cover as required, including mounting frame, foundation bolts etc., complete in all respects.

Supply, installation, testing and Commissioning of compressed Air Moisture separator with flanged ends suitable for 80mm NB pipe mounting on a suitable angle iron frame work.

Supply installation & commissioning of pre filter of 8 kg/cm²

Supply installation & commissioning of fine filter of 8 kg/cm²

Supply and installation ,testing & commissioning of the following size "Class C " ERW Grade GI heavy duty pipes and fittings confirming to IS:1239&1879 with necessary cutting, welding/threading wherever necessary including GI fittings like Flanges, bends, collars, reducers, tees etc., with necessary fixing hardware,using suitable angles and painting complete in all respects as per technical specifications and as directed by Engineer in charge

40 mm dia NB pipe

15 mm dia NB pipe

80 mm dia NB pipe

Supply, welding/threading , testing & commissioning Butterfly Valve.of following dia

80 MM DIA

40 MM DIA

Supply, welding/threading, testing & commissioning of 15mm dia 3 piece SS ball (socket type) valves regular bore, lever operated, body and end connectors of carbon steel including operating handle for the compressed air outlet.

Supply, welding/threading, testing and commissioning of 15mm dia quick release single coupling for the compressed air outlets consisting of both socket and plug for hose pipe of 6mm dia & suitable for working pressure of 7.0bar complete in all respect.

Supply, welding/threaded, testing & commissioning of compressed air Automatic liquid drain trap of 15mm dia.

Supply, installation, testing and commissioning of Pressure gauge 2" dial with 15NB isolation valve inclluding all accessories complete and as directed by EIC.

Design, Fabrication, Supply and fixing/grouting in wall of suitable size MS angle iron supports/ flat/ brackets as per site requirement for painting the same with two coats of synthetic enamel paint over a coat of zinc chromite primer for supporting the compressed air line complete in all respects and as directed by EIC/OIC.