PURCHASE AND INSTALLATION OF WORKSHOP MACHINERY AND ALLIED ITEMS FOR UPGRADATION OF MECHANICAL WORKSHOP AT HISAR

Amount

SUPPLY,INSTALLATION, TESTING, COMMISSIONING OF WHEEL ALIGNMENT MACHINE WITH CVT , UPS & PRINTER WITH TECHNICAL SPECIFICATIONS:- Front Wheel Alignment Measurement, Aluminum Reflector Compatible in Sun Light Camber Angle ± 8,00°, Front Axle Total Toe Angle ± 5,00° , Caster Angle ± 19,00° , Camber Angle ± 8,00° , Rear Axle Total Toe Angle ± 5,00° , Rear Individual Toe Angle ± 19,00° , Symmetry Angles , Front Set Back ±2,50° , Rear Set Back ±2,50° , Thrust Angle ±2,50° , Geometrical Driving Axis ±2,50° MAKE- PRECISION/ICON/ATS-ELGI/HUNTER/BLUE POINT

SUPPLY, INSTALLATION, TESTING, COMMISSIONING OF WHEEL BALANCER MACHINE WITH CVT WITH TECHNICAL SPECIFICATIONS:- Rim Diameter 10" - 24" or 265 - 615 mm, Rim Width 1.5" - 20" or 40 - 510 mm , Distance between wheel and machine , 0 - 25 cm, Balancing Accuracy 1 gm. Power Supply 220 - 240 V, 50 - 60 Hz Single Phase , Motor 0.33 Kw, Maximum Power Consumption 0.6 Kw, RPM 60, Wheels weighing upto 75 Kg, Dimensions with Wheel Guard WxLxH, 1350 (Hood open) x 1220x1670 , Net Weight with Wheel Guard 160 Kg, (Excluding Adaptors) MAKE- PRECISION/ ICON/ATS-ELGI/ HUNTER/ BLUE POINT

SUPPLY, INSTALLATION, TESTING, COMMISSIONING OF NITROGEN INFLATOR MACHINE WITH TECHNICAL SPECIFICATIONS:- Power Supply 1 Ph V / Hz 230/50 Power 25W Nitrogen Purity 95-99.5% Input Air Pressure 8-10 kg/cm Output Nitrogen Pressure 4-7 kg/cm Nitrogen Output 2000-4000 L/h Operating Temp. 20-70° Accuracy ±1 PSI Display Mode 1" LED Dual Display Built-in-Nitrogen Storage Tank 85L High Pressure Charge Hose 10M Range Upto 150PSI, MAKE- PRECISION/ICON/ATS-ELGI/BLUE POINT

SUPPLY,INSTALLATION, TESTING, COMMISSIONING OF TYRE CHANGING MACHINE WITH TECHNICAL SPECIFICATIONS:- Max. wheel diameter 960 mm Rim diameter 10" - 23" Maximum Rim width 3" - 12" Rim Clamping from outside 10" - 20" Rim Clamping from inside 12" - 23" RPM 6.5 r/min Electric motor 0.75Kw / 1.1 Kw Mains supply (Single Phase Optional I Ph. 220 V / 3 Ph. 380 V Operating air pressure 8-10 bar Dimensions LxDxH 1400 x 1200 x 1900 mm Net Weight 177 kg & Above MAKE- PRECISION/ICON/ATS-ELGI/BLUE POINT

SUPPLY,INSTALLATION, TESTING, COMMISSIONING OF AIR COMPRESSOR MACHINE WITH TWO NO. FRL (With Lubricating Oil) WITH TECHNICAL SPECIFICATIONS:- Motor Rating HP 3 Piston Displacement LPM 490 Piston Displacement CFM 17.3 Operating Pressure PSI 171 Operating Pressure Kg/cm² 12.0 Tank Capacity (In Litres) 220 FRL 2 No. MAKE- PRECISION/ICON/ATS-ELGI BLUE POINT

SUPPLY OF PNEUMATIC IMPECT WRENCH SET (IMPACT WRENCH) (PNEUMATIC IMPACT WRENCH GUN-Size 1/2 Inch & 1 Inch ,WITH (FRL) FILTER REGULATOR LUBRICATOR- 2 No.(With Lubricating Oil), IMPACT SOCKET SET, SPIRAL HOSE PIPE,PLANE HOSE, COMPLATIBLE QRC (BRASS) WITH TECHNICAL SPECIFICATIONS:- Pneumatic Gun (Impact Wrench) with FRL 2 No., Hose and Impact Socket Set (Size upto 55mm) (Make: Taparia/Stanley/Blue Point). MAKE- CHICAGO PNEUMATICS/STANLAY/BLUE POINT

SUPPLY OF ALIGNMENT TOOL KIT WITH TECHNICAL SPECIFICATIONS:- Socket set (Size: upto 55mm); Double End Spanner set (Size up to 55mm); Ring spanner set (Size up to 55mm); Combination set; All plier(Combination/Long Nose/Bent Nose/Side Cutting/Circlip-2 Each); Wheel Spanner(Box/L/Cross Rim Wrench/Tubular Box /Tubular Spanner Set ); Centre punch; Hammer; Chisel; Measuring Tape 30 Meter; MAKE- TAPARIA/STANLEY/VENUS

SUPPLY OF WHEEL BALANCING WEIGHT KIT (28 KG) WITH TECHNICAL SPECIFICATIONS:- All weight from 5 to 100 gram.MAKE- PRECISION/ICON/ATS-ELGI

SUPPLY OF ACCESSORIES:- NALKI (Tyre Valve), CAMBER BOLT, SHIMS, PUNCHER KIT, NOZZLE PULLER, WALL DIE WITH TECHNICAL SPECIFICATIONS:- Nalki (Tyre Valve), Air Blowing Gun ( Air 70-100 Psi. ) 5 No. Camber Bolt, Shims Puncher Kit, Nozzle Puller, Wall Die. Measuring Tap 5 Meter -2 Each; MAKE- PRECISION/ICON/ATS-ELGI

SUPPLY, INSTALLATION, TESTING, COMMISSIONING OF TRUCK TYRE CHANGING MACHINE WITH TECHNICAL SPECIFICATIONS:- Max. Wheel Diameter 1500 mm Rim Diameter 14" - 26" Maximum Wheel Width 760 mm Operating Pressure 130-150 bar Hydraulic Pump Motor 1.5 Kw, 380V, 3 Phase, 50Hz Gearbox Motor 1.8 Kw, 380V, 3 Phase, 50Hz Mains supply 230-400V 3 ph 50-60Hz Noise Level <70dB Dimensions LxWxH 2180 x 2100 x 1200 mm Net Weight 585Kg. & Above MAKE- PRECISION/ICON/ATS-ELGI/BLUE POINT/HUNTER

SUPPLY,INSTALLATION, TESTING, COMMISSIONING OF TRUCK NITROGEN INFLATOR MACHINE WITH TECHNICAL SPECIFICATIONS:- Power Requirement AC220V 50Hz 1 Phase Power Consumption 45VA Operating Temperature Range -20℃/ 4°F to 70℃ /158°F Compressed Air Input Range - 145-217PSI /10-15 bar/1000-1500kPa Compressed Air Input Flow 900L/min (32cfm) Nitrogen Purity 95～99+% Nitrogen Output 228L/min (8cfm)@ 116 PSI/ 8bar/ 800kPa Maximum Nitrogen Pressure in Tank145-174PSI/10-12bar/1000-1200kPaAdjustableTank Capacty- 250 Ltr & Above MAKE- PRECISION/ICON/ATS-ELGI/BLUE POINT/HUNTER

SUPPLY,INSTALLATION, TESTING, COMMISSIONING OF AIR COMPRESSOR MACHINE WITH TWO NO. FRL (With Lubricating Oil) WITH TECHNICAL SPECIFICATIONS:- Motor Rating HP 7.5 Piston Displacement LPM 941 Piston Displacement CFM 33,3 Operating Pressure PSI 171 Operating Pressure Kg/cm² 12.0 Tank Capacity (In Litres) 500. MAKE- PRECISION/ICON/ATS-ELGI /BLUE POINT/HUNTER

SUPPLY OF ELECTICAL GUN (IMPACT WRENCH) WITH IMPACT SOCKET SET FOR TRUCK WITH TECHNICAL SPECIFICATIONS:- Electrical Gun (Impact Wrench) for Truck with 1" drive (With Impact Socket Set up to 55mm Size). MAKE- BOSCH/ STANLAY /BLUEPOINT

SUPPLY, INSTALLATION, TESTING, COMMISSIONING OF TWO POST HYDRAULIC LIFT 4 TON WITH TECHNICAL SPECIFICATIONS:- Operation Electro-hydraulic Capacity 4000 Kg Lifting height Max. 1800mm Minimum Height 110mm Lifting Time 50 Sec Lowering time 40 Sec Overall Height 2824mm Overall Width 3426mm Passing Width 2576mm ELECTRIC SPECIFICATIONS Electric motor power 2,2 Kw Voltage 3ph. 230-400V trif.+/-5% Frequency 50 Hz Noise <80Db. MAKE- PRECISION/ICON/ATS-ELGI/BLUE POINT/HUNTER

SUPPLY OF OIL DRAINER WITH TECHNICAL SPECIFICATIONS:- Gravity feed oil drain, Tank capacity 50L. MAKE- PRECISION/ICON/ATS-ELGI /BLUE POINT/HUNTER

SUPPLY OF HYDRAULIC JACK WITH TECHNICAL SPECIFICATIONS:- Double Piston CAPACITY 3 TON & Above. MAKE- TAPARIA/PRECISION/ICON/ATS-ELGI/BLUE POINT/HUNTER/STANLAY/VENUS

SUPPLY OF TOOLSWITH TROLLEY WITH TECHNICAL SPECIFICATIONS:- 90pcs (Tools) tools trolley and 3 drawer and 1 fixed. MAKE- TAPARIA/STANLAY/VENUS

SUPPLY OF JACK STAND FOR TRUCK & SUV WITH TECHNICAL SPECIFICATIONS:- Capacity 3 Ton & Above. MAKE- TAPARIA/STANLAY/VENUS

SUPPLY,INSTALLATION, TESTING, COMMISSIONING OF LATEST VERSION CAR SCANNER LAUNCH WITH TECHNICAL SPECIFICATIONS:- Type • OBD Reader; Wireless • Yes; Compatible Devices • Tablet; Compatible OS • NA; Powered By • Vehicle Powered; Vehicle Brand • Universal; Vehicle Model Name • Universal Vehicle Model Year • 2005 to till date ,Compatible to BS VI Latest version of Vehicles, Universal; Operations Supported • Engine scan, ABS SCAN, BCM SCAN, TCM SCAN, SRS SCAN, Air Bag scan, Injector coding, Live Data, ECU reset, Immobilizer coding, Adaption, SAS RESET, Oil reset and many more; Protocols Supported • CAN;Voltage Rating • 12 V ON/OFF Switch Present • Yes; Alert Type • Email; Bluetooth Compatible • Yes; Wifi Compatible • Yes; Number of Pins • 16; Material • Rubber, Plastic Display Features; Languages Supported • English; Display Type • HD. MAKE- HUNTER/BLUE POINT/ STANLAY/PRECISION/ICON/ATS-ELGI

SUPPLY OF SERVICE CREEPER WITH TECHNICAL SPECIFICATIONS:- HEAVY DUTY WITH METALLIC BODY. MAKE- PRECISION/ICON/ATS-ELGI

SUPPLY OF JIB CRANE WITH TECHNICAL SPECIFICATIONS:- Lifting Capacity 2-5 Ton MAKE- TAPARIA/ PRECISION/ICON/ ATS-ELGI/ BLUE POINT/ HUNTER/ STANLAY/ VENUS

SUPPLY OF GEAR BOX JACK (HEAVY DUTY) WITH TECHNICAL SPECIFICATIONS:- HEAVY DUTY FOR TRUCKS CAPACITY 3 TON & ABOVE. MAKE-TAPARIA /PRECISION/ ICON/ ATS-ELGI/ BLUE POINT/ HUNTER/ STANLAY/ VENUS

SUPPLY OF DENTING TOOL KIT WITH SPECIFICATIONS:- Body jack (set of 3 pcs) Riviting Machine 2 No., Hot Air Gun 2 No., Cutting Machine 2 No, Hand Grinder 2 No., Sand Disc. 50 Pic. Hand Drill Machine 2 No., Denting Hummers & Doly 3 Set , Denting Taflon Hammers, Dent Lifter/Puller 2 No., Dent Puller 2 No., Blacksmith Tong 6Pcs Chain 10 feet. MAKE- TAPARIA/STANLEY/BLUE POINT/ CHICAGO PNEUMATICS/BOSCH

SUPPLY OF PAINTING TOOL KIT WITH SPECIFICATIONS:- General Tools & Accessories: Spiral Hose: 20Mtr Putty Knife (1.5 inch to 6 Inch) 8 Pic., Paint Spray Gun (Metallic) Capacity 500ml & Above- 2 No., Rubbing Machine-02 No., Electric Polisher -2 No., Paint Scrapper 3 Inch- 5 No., MAKE- PILOT/ BOSCH/ TAPARIA/ STANLAY/BLUE POINT/ CHICAGO PNEUMATICS

SUPPLY,INSTALLATION, TESTING, COMMISSIONING OF HIGH PRESSURE CAR WASHER MACHINE WITH TECHNICAL SPECIFICATIONS:- Wet end MOC BRASS Flow in lit/min 80 & Above Design Pressure in Kg/sq.cm 80 – 90 & Above Medium to be pumped Water Weight of Pump 16.2 kg& Above . Maximum Pressure 62 bar& Above Working Pressure 57 bar& Above Jet Spray Height (Feet) 40 & Above Power (HP/KW) 5 / 3.75 & Above MAKE-TECH FANATICS/PRECISION/ICON/ATS-ELGI/BOSCH/

SUPPLY,INSTALLATION, TESTING, COMMISSIONING OF WET & DRY DOUBLE MOTOR 77 LTR & ABOVE HEAVY DUTY VACCUM CLEANER MACHINE WITH TECHNICAL SPECIFICATIONS:- Power 2500 W & Above Power Supply 1 Phase, 220 Vac. - 50 Hz Vacuum 22 KPa& Above Function Wet / Dry Air Flow 54/108 L/S & Above Capacity 77 L & Above Length of Cable 5 M Noise 72 db. MAKE- EUREKA FORBES/ BOSCH/ STANLAY /ATS-ELGI/ ICON

SUPPLY,INSTALLATION, TESTING, COMMISSIONING OF WATER DISPENSER MACHINE WITH REFRIGERATOR CABIN WITH TECHNICAL SPECIFICATIONS:- HOT, COLD & NORMALWATER SUPPLY Cold Tank Capacity(ltr):03ltr. Hot Tank Capacity (ltr) : 05 ltr. MAKE- VOLTAS/BLUE STAR/USHA

HSR Ref: Description of Work (Installation and other miscellaneous works) HSR 15.1: Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per clause 304 of MORT&H specifications Ordinary soil, 15.1.1: By Manual Mean Excavation for Structures for Alignment Pit

15.1.1: By Manual Means: Excavation for Structures for Two Post Lift

15.8: Plain/Reinforced Cement Concrete in Open 1500, 1700 Foundation complete as per Drawing and &2100 Technical 1500,1700 and 2000 of MORT&H Specifications. (As per Approved Make In The Department) 15.8.4.1: PCC Grade M25 For Pit

15.8.5.1: RCC Grade M25 For Foundation

15.8.5.1: PCC Grade M25 For Foundation

11.8: Cement Plaster (IN COARSE SAND) 12mm cement plaster of Mix: 11.8.1: 1:4 (1 cement: 4 coarse sand)

7.21.1: Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in: cement motar 1:4(As per Approved Make In The Department)

13.37: Supply and fixing rolling shutters of approved make, made of required size M.S laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangement for inside and outside locking with push and pull operation complete, including the cost of providing and fixing neceessary 27.5 cm long wire spring manufactured from high tensile steel wire of adequate strength confirming to IS: 4454-Part I and M.S. top Cover of required thickness for rolling shutters. 13.37.2: 80x1.20mm M.S. Laths with 1.20 mm thick top cover

13.38: Providing and fixing ball baring for rolling shutters

13.39; Extra for providing mechanical device chain and crank operation for operating rolling shutters.13.39.2: Exceeding 16.80 sqm in area

23.5: COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS: 23.5.5.2: Wiring in existing conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch etc complete as required23.5.5.2; Group B:

23.5.6: Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required.23.5.6.3: 1 run of Size 4 Sqmm(1/2.24mm)( (Make:Havells/Polycab/RR Kabel)

23.22.1: Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work.(Make:Havells/C&S/L&T) 23.22.1.1: Double pole MCCB 16 to 63 Amp, 25 Ka

23.22.1.5: TRIPLE POLE MCCB 200 to 250 Amp, 25 KA

23.22.5: Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:-( Make:Havells/C&S/L&T) 23.22.5.1: 6 amp. to 32 amp Single Pole

23.22.5.3: 6 amp. to 32 amp Double POLE

23.22.5.5: 6 amp. to 32 amp MCB's TRIPLE POLE

23.22.5.6: 40 amp to 63 amp. MCB's TRIPLE POLE

23.7.6: Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. (Polypack/AKG/BEC) 23.7.6.2: PVC pipe of 25 mm dia.

24.1: EARTHING AND LIGHTENING ARRESTOR: 24.1.3: Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

24.1.5: Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.

24.1.6: Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required.

24.1.7: Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.

24.2: LT CABLE (Make:Havells/Polycab/RR Kabel) 24.2.4: Laying of underground cable in pipe /existing open/closed trench etc as (Make:Havells/Polycab/RR Kabel) 24.2.4.2: 16 Sq mm to 35 sqmm 2 to 4 Core

24.2.4.3: 50 Sq mm to 150 sqmm 2 to 4 Core

Supply of Under Ground LT Power Cables of Aluminium Conductor complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (Make:Havells/Polycab/RR Kabel) i) 16 Sqmm 4 Core Ard. Cable

25 Sqmm 4Core Ard. Cable

70 Sqmm 3.5 Core Ard. Cable

Supply and erection of Double door sheet, steel superline/ Powerline/ Loadline TPN Vertical distribution boards suitable for TP/ FP veritcal MCCBs 25 KA MCCB upto 250 amp as incomer (but without cost of MCCBs) fitted with busbars, Neutral links,& Blanking plates complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (i) 12 Way TPN (V) (Make: Havells/ABB/C&S/L&T)

HSR: PE-AL-PE COMPOSITE PRESSURE PIPE 18.27: Providing and fixing Polyethylene- Aluminium-Polyethylene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge. (Make : Jindal/Nexgen/KiTech) INTERNAL WORK • EXPOSED ON WALL18.27.42532 (32 mm OD) pipe

18.27.3: 1620 (20 mm OD) pipe

22.103: Providing and fixing ball valve (brass) of approved quality, High pressure, (Make : L&T/Amco/VIP) 22.103.1: 15 mm nominal bore (1620x1620)

23.103.2: 20 mm nominal bore (2025x2025)

23.103.3: 25 mm nominal bore (2532x2532)

NS: Filter Regulator and lubricator (FRL) (Filled with Lubricant Oil) (Make: Elephant/AirMax/Janatics)

NS: Pneumatic Spiral Hose ( Preassure Rating 12 kg/cm2) (Heavy Duty)

NS: Pneumatic Quick Relese Coupler

NS: Unequal Tee (2532x1620x2532) (Brass Fit) (Make : Jindal/Nexgen/KiTech)

NS: Equal Elbow (2532)(Brass Fit) (Make : Jindal/Nexgen/KiTech)

NS: Equal Elbow (1620)(Brass Fit) (Make : Jindal/Nexgen/KiTech)

NS: Equal Union (2532) (Brass Fit) (Make : Jindal/Nexgen/KiTech)

NS: Equal Union (1620) (Brass Fit) (Make : Jindal/Nexgen/KiTech)

NS: Unequal Union (2532x1620) (Brass Fit) (Make : Jindal/Nexgen/KiTech)

NS: Pipe End (Brass Fit) (Make : Jindal/Nexgen/KiTech)

NS: Pipe Cutter(Make : Jindal/Nexgen/KiTech)

NS: Plastic Ramer (Make : Jindal/ Nexgen/ KiTech)

NS: Bending Tool(Make : Jindal/Nexgen/KiTech)

NS: Pressing Clamp(Make : Jindal/Nexgen/KiTech)

NS: Pipe Holding Clamp With Base Plate (Make : Jindal/Nexgen/KiTech)

JETAGE GARAGE EQUIPMENTS