WORK SERVICES FOR DEMOLITION AND RECONSTRUCTION OF PERIMETER WALL AT AFS BEGUMPET

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling fencing wire mesh or concertina coil, of any type any size complete all as specified and as directed.

Excavating in over areas, hard/dense soil not exceeding 1.5m in depth; for foundation, getting out in hard/dense soil complete all as specified and as directed.

Excavating in over areas, hard/dense soil exceeding 1.5m but not exceeding 3m in depth; for foundation, getting out in hard/dense soil complete all as specified and as directed.

Excavating in trenches, hard/dense soil not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sqm on plan and not exceeding 1.5m in depth and getting out in hard/dense complete all as specified and as directed.

Material and labour for providing Cement concrete type D2 1:4:8 (40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and as directed.

Returning, filling in excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed..

Supply and fix TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No.10 herein before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffit of foundation and plinth beam and similar work similar or batten for rough finished surfaces of concrete in flat complete all as specified and as directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete in square or rectangular complete all as specified and as directed.

Use and waste of formwork to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, and similar works for rough finished surfaces of concrete complete all as specified and as directed.

Material and labour for UPVC 110mm bore pipes SWR grade (10kg/cm2) pressure for weep holes complete all as specified and as directed.

Material and labour for providing RCC M25 (design mix) (20mm graded stone aggregate), as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed.

Material and labour for providing RCC M25 (design mix) (20mm graded stone aggregate), as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

Material and labour for providing RCC M25 (design mix) (20mm graded stone aggregate), Beams, band, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Material and labour for 25mm thick pre-formed filler for expansion/crumple joints complete all as specified and as directed.

Material and labour for Autoclaved Aerated Concrete (AAC) block masonry with solid blocks exceeding 10cm in width (Block size 600x200x200mm) haqving compressive strength as per IS 2185 (Part - III) and setting in chemical mortar of LATICRETE or BIRLA/ ULTRATEC/ SHREE SHAKTI/ PRIME

Material and labour for broken glass coping in cement mortar 1:3 on top of walls complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for mild steel framed work such as Y shape channel angle iron made up fixed over RCC column / PCC solid block including provision of 4 holes each side equally spaced for fixing of barbed wire fencing, grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works conforming to Fe 290 Gde E -165 complete all as specified and as directed.

Material and labour for preparing new or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each) line wire to be measured)complete all as specified and as directed.

Supply and fix concertina coils super barbed bladed profile of dia 600mm and weight of coil for 50 spiral turns shall not be less than 0.9 Kg/Rm and one coil (50 spiral) shall not be stretched to more than 6.0 mt blade shall be 0.50mm thick galvanised steel strip and 2.5mm dia core wire fixed to angle iron brackets or masonry surfaces with necessary accessories like straining wires, fixing clips etc complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Material and labour for extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exceeding not 15 cm in width or girth; including cutting toedges, all mitres and stopped ends etc complete all as specified and as directed.

Material and labour for mild steel framed work such as plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment and similar work conforming to Fe - 290 Gde E-165 complete all as specified and as directed.

Teja Constructions

M/s. P S REDDY

R. Wadhumal and Sons

B.N.S Constructions