Construction of 7.5 CKM 11KV overhead line with 11mtr WPB pole, Construction of DSS (Without Transformer ) 02 no s and Construction of 1CKM of LT line with 09 mtr long PSC pole with 50mm2 ABC for diversion of 11KV Line and coal corridor road of LA

Amount

Supply and erection of galvanized stay set for 11 KV overhead lines complete with 19/20 mm dia x 1.8 mtr long stay rod ,anchor plate of size 45 cm x 45cm x7.5mm thick, thimble ,stay clamps , turn buckle(20mm x 600mm), 7/4.00mm dia G.I. stay wire and 11KV strain insulator etc in cement concrete 1:3:6(1 cement:3 coarse sand : 6 grade stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Earthing with G.I. earth pipe 3.0 Mtr long, 40mm dia., including accessories and providing masonary enclosure with cover palte having locking arrangement and watering pipe etc. with charcoal /cock and salt etc., as required.

Supply and erection of 11KV polymer pin insulator complete with large steel head G.I. pin , nuts, Washers etc as required.

Supply and erection of 11 KV polymer disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Dismantling of over head lines comprising of copper/ alluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Erection of AAA conductor of 7/3.35 mm to 7/4.00 mm diameter including binding etc as reqd. 23.18 KM X 218.26 Kg per KM)

Supply of 11KV 400 AMP 3pole, 50 HZ single break GOAB switch etc as reqd.

Installation & Commissioning of 11KV GOAB switch.

Supply of two lengths of 2.3mtrs MS channel 100mm x 50mm x 6mm(9.56kg/mtr.) double pole cross arm for three wire 11KV OH line conductors complete with through bolts & nuts for clamping to the poles, 50mmx 6mm MS flats welded on one side to the MS channel with bolts & nuts on other side for tying the cross arms together , including drilling holes for insulator pins/fittings, bolts,nuts & washers and painting with primer and finish paint as required.( DP without AB switch).

Supply of two lengths of 3mtrs MS channel 100mm x 50mm x 6mm(9.56kg/mtr.) double pole cross arm for three wire 11KV OH line conductors complete with through bolts & nuts for clamping to the poles, 50mmx 6mm MS flats welded on one side to the MS channel and with bolts & nuts on other side for tying the cross arms together , including drilling holes for insulator pins/fittings, bolts,nuts & washers and painting with primer and finish paint as required.( DP with AB switch).

Supply of two lengths of 1.2mtr MS channel 100mm x 50mm x 6mm(9.56kg/mtr.) double pole cross arm for three wire 11KV OH line conductors complete with through MS bolts & nuts for clamping to the poles, 50mmx 6mm MS flats welded on one side to the MS channel and with bolts & nuts on other side for tying the cross arms together , including drilling holes for insulator pins/fittings, bolts,nuts & washers and painting with primer and finish paint as required.( 11 KV cut point with 180 Degree and 90 Degree angle).

Supply of 0.35mtrs MS channel 100mm x 50mm x 6mm(9.56kg/mtr.) straight cross arm for 11KV cut point with 180 degree and 90 degree angle complete with 50mmx 6mm MS flats with clamps, bolts and nuts including drilling holes for insulator pins/fittings, bolts,nuts & washers and painting with primer and finish paint as required AB switch side support.

Supply of 0.515mtr G.I channel 100mm x 50mm x 6mm(9.56kg/mtr.) Transformer base support G.I channel with 50mmx 6mm G.I flats including drilling holes for insulator pins/fittings, bolts,nuts & washers and painting with primer and finish paint as required. (100KVA & 25KVA T/F)

Supply of 04Nos MS channel 75mm x 40mm x 6mm(7.14kg/mtr.) of 1.66MTR Long double pole belting channel with through bolts & nuts for clamping to the poles, 50mmx 6mm MS flats welded on one side to the MS channel and with bolts & nuts on other side for tying the cross arms together , including drilling holes for insulator pins/fittings, bolts,nuts & washers and painting with primer and finish paint as required.( Dp without AB switch).

Supply of two lengths of 3mtr G.I. channel 75mm x 40mm x 6mm(7.14kg/mtr.) double pole belting channel with through bolts & nuts for clamping to the poles, 50mmx 6mm G.I flats welded on one side to the G.I channel and with G.I. bolts & nuts on other side for tying bthe cross arms together , including drilling holes for insulator pins/fittings,G.I. bolts,nuts & washers and painting with primer and finish paint as required.( 100KVA &25 KVA T/F).

Supply of two lengths of 0.81mtrs G.I. channel 75mm x 40mm x 6mm(7.14kg/mtr.) double pole Cantilever support channel with through bolts & nuts for clamping to the poles, 50mmx 6mm G.I flats welded on one side to the G.I channel and with bolts & nuts on other side for tying the cross arms together , including drilling holes for insulator pins/fittings,G.I. bolts,nuts & washers and painting with primer and finish paint as required.( Cantilever support channel).

Supplying and erection of a set of cross bracing frame work for 11 kv overhead line double pole structure having four members fabricated out MS of 2.671Mtr long to form a rectangle of minimum 2.671 height, complete with 50mm x 6mm MS flat clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as req.( DP without AB switch cross bracing)

Supplying and erection of a set of cross bracing frame work for 11 kv overhead line double pole structure having four members fabricated out of 50mm x 50mm x 6mm MS angle of 3.512Mtr long to form a rectangle of minimum size 3.512mtr height, complete with 50mm x 6mm MS flat clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as req.( DP with AB switch cross bracing).

Supplying and erection of a set of cross bracing frame work for 11 kv overhead line double pole structure having four members fabricated out of 50mm x 50mm x 6mm G.I angle of 3mtr long to form a rectangle of minimum size 3mtr height, complete with 50mm x 6mm G.I. flat clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as req.( Transfermer belting angle).

Supplying and erection of a set of cross bracing frame work for 11 kv overhead line double pole structure having four members fabricated out bof 50mm x 50mm x 6mm G.I angle og 0.58mtr long to form a rectangle of minimum size 580mm height, complete with 50mm x 6mm G.I. flat clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as req.(Transfermer belting support).

Supplying and erection of a set of cross bracing frame work for 11 kv overhead line double pole structure having four members fabricated out of 50mm x 50mm x 6mm G.I angle of 1mtr long to form a rectangle of minimum size 1000mm height, complete with 50mm x 6mm G.I. flat clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as req.(L.T distribution board mounting angle).

Supplying and erection of a set of cross bracing frame work for 11 kv overhead line double pole structure having four members fabricated out bof 50mm x 50mm x 6mm G.I angle of 1.282mtr to form a rectangle of minimum size 1282mm height, complete with 50mm x 6mm G.I. flat clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as req.(cantilever support angle).

Supplying of MS channel 75mm x 40mm x 6mm (7.14 Kg per metre) V shape cross arm for two11 KV overhead line conductors complete with 50 mm x 6 mm MS flat clamps,bolts & nuts including drilling holes for insulator pins, bolts, nuts & washers etc(as per drawing) and painting with primer and finish paint as required.

Transportation Charges

Supply of fish plate 50 x 6mm, 2.36 KG per mtr, each 0.280 mtr length.

Muffing of poles etc. as reqd of dimention 0.5 mtr x 0.5 mtr x 0.45mtr = 0.11 Cum.

Supply of WPB 160 X 152 (11 Mtr long pole, 30.44 kg/Mtr)

Supply of G.I Nut & Bolts etc as reqd.

Supply of 80 Sq.mm AAAC conductor..

Supply & Erection of G.I. barbed wire with Anticlimbing device 3kg per support and back clamp for anti climbing device 25 x 3mm flat, 0.59kg per mtr , flat of 0.510 mtr length.

Erection of G.I. wire including binding etc as required.

Supply of 8 SWG G.I. wire.

Supply & erection of Danger Plate (H.T & L.T.) including back clamp for danger plate 25 x 3mm flat, 0.59 kg per mtr, flat of length 0.51mtr.

Supply & Fixing of Earthing of support coil type.

Supply & Erection of three piece non linear resistor type lightining resistor suitable for 3 wire,12 KV (10KA) O/H lines with rated voltage KV (rms) with a nominal discharge current rating 10 KA and complete with galvanised clamping arrngement, G.I bolts,nuts,washers etc. as reqd . Station class-2

Dismantling , Shifting & installing of Transformer , Supply & Erection of 11KV 200 AMP, 3 pole Horn gap fuse/ Drop out fuse with pin insulator etc. as required .

Supply and erection of 4C x 35 sqmm LT XLPE cable(Armoured) for 25 KVA Transformer..

Supply of 09 Mtrs. Long /300Kg PSC Pole.

Supplying & erection of stay set complete(galvanized) with 19/20 mm diaX 1.8 mtrs long stay rod ,anchor plate of size 45cmx45cmx7.5mm thimble, stay clamps, bow tightener, 7/3.15 mm dia GI stay wire and strain insulator etc. in cement concrete 1:3:6 (1 cement:3 coarse sand :6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.

Supply of Ariel Bounch able 4CX 50sq mm ( P) + 1C X 50 sq mm ( M) + 1CX 16 Sq mm ( Street light ) LT AB Cable

Erection of AB Cable of 72.11 mm to 7/3.00 mm diameter including binding etc as reqd.

Supply & Fixing of L.T. Distribution boxwith MCCB, Aluminium Busbar of single Bay with kit kat fuse for 25 KVA S/S.

Supply & Erection of LT pole clamp for Eye hook for (XLPE Aerial bunched Cable)

Supply & Erection of Eye hook for XLPE Aerial bunched Cable (25-70 Sq mm)

Supply & Erection of Dead End Clamp suitable for messenger XLPE Aerialbunched Cable (25-70 Sq mm)

Supply & Erection of Suspension Clamp with Eye hook for ABC (25-70 Sq mm)

Supply & erection of 55 Sq.mm AAAC conductor pvc insulated.

Supply & erection of 8 WAY SERVICE Distribution box with kit kat fuse and aluminium bus bar.

Supply & erection of Insulated piercing connector. Type-A-main 50 to 150 sq. mm & Tap-50 to 150sq. mm

Supply & erection of Insulated piercing connector. Type-B-main 25 to 150 sq. mm & Tap-6 to 35 sq. mm

Supply & erection of Insulated piercing connector. Type-C-main 16 to 95 sq. mm & Tap-1.5 to 16 sq. mm

Supply & erection of Insulated piercing connector. Type-D-main 10 to 50 sq. mm & Tap-1.5 to 10 sq. mm

Supply of two lengths of 3mtr long MS channel 75mm x 40mm x 6mm(7.14kg/mtr.) AB Switch mounting channel with through bolts & nuts for clamping to the poles, 50mmx 6mm MS flats welded on one side to the MS channel and with bolts & nuts on other side for tying bthe cross arms together , including drilling holes for insulator pins/fittings, bolts,nuts & washers and painting with primer and finish paint as required.( Dp with AB switch).

Supply & Fixing of L.T. Distribution boxwith MCCB, Aluminium Busbar of single Bay with kit kat fuse for 100 KVA S/S.

Supply and erection of 4C x 150 sqmm LT XLPE cable(Armoured) for 100 KVA Transformer..

Erection of pole top/straight two wire v shape two wire angle iron/channel iron cross arm on steel tubular/rail/P.C.C for 11/22/33 KV etc. as required.

Erection of Metallic pole of following length in cement concrete 1:3:6( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required. Above 8.0 mtrs. And upto 11.0 mtrs.

Supply of 11KV 200 AMP 3pole single break, 50HZ GOAB switch etc as reqd.

Supply & Erection of PG Clamp (For 80sqmm AAA conductor)

Supply & Erection of PG Clamp (For 55sqmm AAA conductor)

Supply & Painting of Yellow/ Black Colour

Supplying of GI channel 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm GI flat clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Supply of one 0.8mtr G.I. channel 75mm x 40mm x 6mm(7.14kg/mtr.) support for double pipe with through bolts & nuts for clamping to the poles, 50mmx 6mm G.I flats welded on one side to the G.I channel and with bolts & nuts on other side for tying the cross arms together , including drilling holes for insulator pins/fittings,G.I. bolts,nuts & washers and painting with primer and finish paint as required.( Support channel for GOAB down pipe).

Supply of two lengths of 3mtr G.I channel 100mm x 50mm x 6mm(9.56kg/mtr.) Top channel with 50mmx 6mm G.I flats for clamps,bolts and nuts including drilling holes.

Supply & Erection of GI Fencing with Gate

Erection of double pole 03 wire cross arm for 11/22/33 KV O/H line etc. as required.

Total impact of GST for the purpose of CTC