Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
24 Feb 2026, 2:30 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
60 days
Expenditure
General
LP
4 conditions
The Railway reserve the right to procure full or bulk quantity of tendered item is restricted to be procured from RDSO/ICF/RCF/MCF approved sources only.
Trading Enterprises and authorized agent/dealers of OEM will not be extended any MSE benefits.
Land Border Criterion : This tender is governed by RB L/No.- 2020/RS(G)/779/2 dtd. 06.08.2020
In case of Authorised dealer, Firm should upload the valid tender specific authorization certificate of the OEM, falling which their offer will be summarily rejected.
30 conditions · 1 needing a document upload
Validity of the offer shall not be less than 60 days.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across Assam · 5,500 Set total
1. (HSN Code: 86073090) STIFFENER PLATE OF FRONT CARRIER PLATE FOR AAR-H- TYPE CBC WITH BDG as per RDSO drg. no: RDSO/CG/DRG/24034, Alt-2 or latest (attached), HARDNESS: 190 to 245 BHN with annealed condition and surface treatment with Black E.D coating/Black Paint after primer (with fasteners Hex Head Bolt M16 X 45 IS:1364 Part 2 gr. 10.9 , Hex Castle Nut M16 IS: 1364 Part 1 ,Split Pin 5 X 40 IS:549 with NABL test certificate). Make: CCL/ASCO or similar. 2. (HSN Code: 7318) Set of Fasteners for Stiffener plate of front carrier plate for AAR-H-CBC with BDG as per Drg. No. RDSO/CG/DRG/24034, ALT-2 or latest. Each set consisting of 3 items. (1) Hex Head Bolt of Size M16 X 45, Grade 10.9, CE IS:1364 (PT-2), Qty/set-1 Nos. (Bolt Thread end side should be 5 mm split pin hole), (2) M16 Hex Castle Nut Grade 8, IS: 2232-1967, Qty./set- 01 Nos. (3) Split Pin 4x40 Long IS: 549, Qty/set. 01 Nos. N.B. For Bolt & Nut the coating as per MDTS-057. Make:- TVS/Unbrako/LPS/CAPARO
TS265150~NFR
TS265150
Open - Indigenous
Goods
Assam
₹0
Exempted
24 Feb 2026
12 Feb 2026
2 items · 5,500 Set total
(HSN Code: 86073090) STIFFENER PLATE OF FRONT CARRIER PLATE FOR AAR-H-TYPE CBC WI TH BDG as per RDSO drg. no: RDSO/CG/DRG/24034, Alt-2 or latest (attached), HARDNESS: 190 to 245 BHN with annealed condition and surface treatment with Black E.D coating/Black Paint after primer (with fasten ers Hex Head Bolt M16 X 45 IS:1364 Part 2 gr. 10.9 , Hex Castle Nut M16 IS: 1364 Part 1 ,Split Pin 5 X 40 IS: 549 with NABL test certificate). Make: CCL/ASCO or similar. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/C&W/DBRG, NFR | Assam | 500.00 Set |
| Total | 500 Set | |
(HSN Code: 7318) Set of Fasteners for Stiffener plate of front carrier plate for AAR-H-CBC wit h BDG as per Drg. No. RDSO/CG/DRG/24034, ALT-2 or latest. Each set consisting of 3 items. (1) Hex Head B olt of Size M16 X 45, Grade 10.9, CE IS:1364 (PT-2), Qty/set-1 Nos. (Bolt Thread end side should be 5 mm s plit pin hole), (2) M16 Hex Castle Nut Grade 8, IS: 2232-1967, Qty./set- 01 Nos. (3) Split Pin 4x40 Long IS: 5 49, Qty/set. 01 Nos. N.B. For Bolt & Nut the coating as per MDTS-057. Make:-TVS/Unbrako/LPS/CAPARO [ W arranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/C&W/DBRG, NFR | Assam | 5000.00 Set |
| Total | 5,000 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5685680.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .