34(2ND CALL) OF EE(EL) OF 2025-26 OF EE/WBSWC

Supplying and fixing double door Horizontal 4way TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment complete with 100A 4pole isolator & 12 nos.32A SP MCB outgoing(Legrand /L & T/ABB make).

Supplying and fixing double-door (2+8)way SPN MCB Distribution Board with IP-42/43 protection complete with 1No. 40A DP isolator as incomer, 8 nos 6/10A SP MCB 10kA capacity outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment for Office block(Make- Legrand/L & T/ABB).

Supplying and fixing double-door (2+4)way SPN MCB Distribution Board with IP-42/43 protection complete with 1No. 40A DP isolator as incomer, 4nos 6/10A SP MCB 10kA capacity outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment for Office block(Make- Legrand/L & T/ABB).

Supplying and fixing 240/415 V 63A FP MCB(Appd. make) of Breaking capacity 10kA & C characteristics and necessary connection including Supplying and fixing 4 way MCB SS enclosure with IP-20/30 protection, powder coated painting& provision for earthing attachment.

Supplying and fixing 240/415 V 32A DP MCB(Appd. make) of Breaking capacity 10kA & C characteristics and necessary connection including Supplying and fixing 2 way MCB SS enclosure with IP-20/30 protection, powder coated painting & provision for earthing attachment.

S & F 100A capacity cable loop box of size 500mm x 500mm x 150mm MS (16 SWG) with 4 Nos. Cu bar including painting as to GS.

Supply & Laying of 1.1KV grade one No. 4 core 16 sqmm PVC/XLPE insulated armoured Al cable on wall surface by MS saddle with 2 Nos. 10SWG G.I. wire as earth continuity as to GS (Havells/KEI/Polycab/Gloster/Mescab make).

Supply & Laying of 1.1KV grade one No. 2 core 6 sqmm PVC/XLPE insulated armoured Al cable on wall surface by supplying MS saddles including 1 No. 10 SWG GI earth continuity wire as to GS(Havells/KEI/Polycab/Gloster/Mescab make).

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables and finishing the end by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials-- for 4 core 16 sqmm.

Do--do---do--for 2 core 10 sqmm.

Do--do---do--for 2 core 6 sqmm.

Supply & drawing 1.1KV grade 10 sq mm stranded PVC insulated Copper lead as meter loop (Havells/KEI/Polycab/Mescab make).

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' Precision make) incl. necy. fittings as required. (a) 2 x 6 sqmm + 1 x 4 sqmm ECC.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' Precision make) incl. necy. fittings as required. (a) 2 x 4 sqmm + 1 x 2.5 sqmm ECC .

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' Precision make) incl. necy. fittings as required. (a) 2 x 2.5 sqmm + 1 x 1.5 sqmm ECC.

Finishing the end termination of 10 sq mm Copper lead with Dowells solderless Cu socket as to GS.

Finishing the end termination of 6 sq mm Copper lead with Dowells solderless Cu socket as to GS.

Finishing the end termination of 4 sq mm Copper lead with Dowells solderless Cu socket as to GS.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Distribution wiring in 1.1 KV grade 3x1.5 sqmm single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish (Av.Run-10 mtr).

Distribution wiring in 1.1 KV grade 3x1.5 sqmm single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], to light points with 2no. 2wayModular type switch (Brand approved by EIC) fixed on Modular GI switch board complet ewith 2no. suitable size“Ph&N”copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. (Av.Run-10 mtr).

Do---do--do--to 6A 3 pin Modular type plug socket & switch.

Distribution wiring in 1.1 KV grade 3x1.5 sqmm single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make).

Supplying & Fixing GI Modular Switch Board of size 6 Module complete with three no. suitable size Copper bar with holes(for Ph,N&E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.

Supply & Fixing 240V 6A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required.

Supply & Fixing 240V 6A Modular type Plug socket (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply of 240V 20W single LED tube fitting complete with 20W TLED Mas LED T8 lamp(Make: Philips, TMC-502P 1 xT-LED or equivalent Crompton make).

Supply of 240V 20W twin LED tube fitting complete with 20W TLED Mas LED T8 lamp(Make: Philips, TMC-502P 2 xT-LED or equivalent Crompton make).

Fixing only single LED tube light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply of decorative wall light, gold finish fixture with cognac hammered glass diffuser complete with 7.5W LED Filament lamp (Make;-Havells, Model No. LHFOAJD1TZ1A060, FLORETINE WL 1LS E27 CGN or appd by the EIC) for Guest room.

Supply of decorative wall mounting, brushed nickel finish fixture with Opal Glass diffuser complete with 2 nos. 9W LED lamp (Make;-Havells, Model No. LHFOAJE2TZ1I060, FLORETINE WL 2LS B22 SS or appd by the EIC) for Dining hall.

Supply of night foot lamp (Make: Schneider Electric or appd by the EIC).

Supply of decorative surface mounting, dome shaped pendant light fitting complete with 7.5W LED Filament lamp (Make:-Havells, Model No. LHFHDPE1TN1K020, NIMBUS or appd by the EIC).

Fixing only Wall Bracket /Pendant light fittings including necessary connections.

Supply & fixing decorative 40W Post top for 360° indirect light with IP 65 protection. Resistant to impact and corrosion. Glare-free and better uniformity including necessary fixing arrangement.(Make -Crompton, Maple,Cat No. LTPO 40 CDL-M).

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.

Supplying & Fixing iron beam fan clamp of two piece type,as per approved specification, fabricated from 40mmx9mm MS sheet flat suitable for beam having flange upto 150mm wide–(As per Drawing no. 476 of PWD Specification Book – May 1991).

Supply of 1200mm sweep AC ceiling fan(Crompton Aura Prime Antidust/ Orient Quasar Ornamental/ Havells Equiv.).

Supply of 1200mm sweep AC ceiling fan (Orient NEWBREEZE/Crompton Aura l2OOmm /Havells Equiv.).

Supply of 900mm sweep AC ceiling fan (Orient NEWBREEZE/Crompton Aura l2OOmm /Havells Equiv.).

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply of 300mm sweep heavy duty (1400 RPM) AC exhaust fan (EPC make).

Fixing only 300mm sweep exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for 300 mm sweep exhaust fan.

Supply & Fixing Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long).

Supply of 90W outdoor LED street light fitting complete with all accessories made up of pressure die cast aluminium housing with toughened glass with IP66 protection & 10KV SPD and fixing the same on existing arm bracket. (Make- Crompton, Cat No.CRP-411-90-57-SL-GL-NSG/ equivalent Philips/Bajaj/Wipro make) [Warranty five years].

Supply of 70W outdoor LED street light fitting complete with all accessories made up of pressure die cast aluminium housing with toughened glass with IP66 protection & 10KV SPD for security light . (Make: Crompton, Cat No.CRP-409-70-57-HL2-GL-NSG/Equivalent Philips/Bajaj/Wipro make).

Supplying and Fixing PVC water proof looping cable box having hinged door of size: 250mm x 200mm x105mm (Sintex make or appd. make) Comprising of 32A capacity 2-way stud type cable terminal & 1 no. 6A SP MCB C-curve,10KA and housing the same on wall by clamping arrangements.

Supplying & installation of 80mm dia 2mt. long GI pole with 6mm thickness MS base plate including 32/40mm dia 1.5mt long GI arm bracket (ISI, medium gauge)complete with pole header & painting & incl. 2x1.5 sqmm FR PVC Cu connecting wire from loop box as per instruction of the EIC for roof top of office building.

Providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring,

Fixing only outdoor street light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and mending good damages to wall and painting.

Supply & fixing of Timer Controller for Security light consisting of 1 No.40A DP MCB isolator, 25A 2-Pole Power Contactor(L&T make), 240V 24 hours Digital Timer, Centre off 2-way toggle switch, 32A Barrier type Terminal, 2 nos. LED indicating lamp with suitable size powder coated MS 12 way SPN BD box complete with internal electrical connections by 2x4 + 1x2.5 sqmm CU wires as required.

S & F of 10 litre storage capacity vertical type geyser 4/5- Star rating ( Make:-Venus Lyra 10R/ AO Smith SAS 10 /V-Guard Pebble Shine Plus).

Charges for disconnection & dismantling of existing distribution system including sub-meter and refixing the same after completion of renovation works.

Earthing with 50 mm dia GI pipe(ISI-medium gauge) 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level incl one cu mtr. excavation of soil.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1).

Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works.

Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building works.

Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of vertical conductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts, check-nuts, spring washers etc. as required.

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation per vertical run.

SITC of Glowsign Board (Router cutting) with liquid Acrlyic letters with adhesive on ACP boaid of 3mm thick {Make-Aludecor/ Alstone) of suitable size to accommodate all the matters / contains as approved by the authority to be made with 25 x 25 x 4mm MS angle lron, 18 S.W.G square / Round Hollow bar, base plate (10mm thickness) required for fixing the necesarv Nuts, Bolts,Washers, supporting angte lron, Clamp etc. and ACP sheet on front sides & edges only & back side to be covered by GI sheet(with proper ventilation arrangement), all side to be moulded unifornmly, side fabricated by Aluminium 'L' channel, upon which elevated or box type letter made from imported liquid acrylic will be fixed. The thickness of Acrylic will be 5mm (for small letters, 8mm(for big letters) and 10mm (for very big letters). The Back Side of the letters is covered by 3mm thick ACP (Make-Aludecor/Alstone. The inside of the letter Supplying & Fixing of best quality LED lighting arrangement of fully water proof LED tubelight fitting of 20W (100 lumen / watt).Intensity: Same & Smooth uniform throughout without any dark patch. The letters are sealed by exterior grade Silicon. The back side of the Board covered by 22 SWG GI sheet with Nuts & Bolts. The complete Glow Sign board to be fixed on wall by 50mm x 50mm x 6mm MS angle iron support and painting the all metal structure by two coats of Aluminium paint over R.O. primer. Size of Glow Sign Board: 6ft. x 3ft. The complete sign board would be fixed on roof of the building with providing necessary CC muffing or 50mm x 50mm x 6mm angle iron support with 1 No. PVC loop box for taking incoming supply.

Please Enable Macros to View BoQ information