Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹14.1 L+₹44,547.20 (3.25%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹15.2 L+₹1.5 L (10.8%)Rejected-Finance CHANDPURA TIKAMGARH DIST TIKAMGARH MP | TIKAMGARH | TIKAMGARH | MADHYA PRADESH | L3 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | KATARIA CONSTRUCTION L2 | RUCHIKA CONSTRUCTIONS L1 | POOJA CONSTRUCTION COMPANY L3 |
|---|---|---|---|---|---|---|
| 1.00 | Surface excavation not exc 30 cm deep and average 15 cm in soft/loose soil and getting out all as specified and directed by Engineer-in-Charge. | 546 | Sqm | 25 ₹13,650 Lowest | 40 ₹21,840 | 250 ₹1,36,500 |
| 2.00 | M&L for hardcore of broken stone or boulders of gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface | 52 | Cum | 2,000 ₹1,04,000 | 1,400 ₹72,800 | 700 ₹36,400 Lowest |
| 3.00 | M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub floors, sub bases, floors and pavings etc. complete all as specified. | 520 | Sqm | 225 ₹1,17,000 | 180 ₹93,600 Lowest | 450 ₹2,34,000 |
| 4.00 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. | 520 | Sqm | 770 ₹4,00,400 | 725 ₹3,77,000 Lowest | 780 ₹4,05,600 |
| 5.00 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-charge. | 7.8 | Cum | 8,000 ₹62,400 Lowest | 9,000 ₹70,200 | 8,000 ₹62,400 Lowest |
| 6.00 | S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. | 157.24 | Sqm | 250 ₹39,310 Lowest | 400 ₹62,896 | 600 ₹94,344 |
| 7.00 | S&F 5mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed by Engr-in-charge. | 157.24 | Sqm | 500 ₹78,620 Lowest | 670 ₹1,05,350.8 | 600 ₹94,344 |
| 8.00 | S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame . AS per specification and drawing. | 331 | RM | 50 ₹16,550 | 40 ₹13,240 Lowest | 50 ₹16,550 |
| 9.00 | S&F Solid PVC Wall Lining consisting of 5mm thick single side colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing | 82.75 | Sqm | 1,400 ₹1,15,850 | 1,600 ₹1,32,400 | 800 ₹66,200 Lowest |
| 10.00 | Supply and fixing decorative sandstone fountain of height not less than 1.80 metres and base diameter ranging from 0.45 to 0.50 metres, comprising three-tier lotus-shaped carved bowls. The fountain shall be made from high-quality natural sandstone, uniformly finished, free from cracks or structural defects. Each tier shall be elegantly carved in lotus petal form, as per the approved design and colour shade. All materials and workmanship shall conform to the approved sample. The item includes all labour, tools, and incidental civil works required for proper fixing, levelling, and anchoring at site, complete in all respects as directed by the Engineer-in-Charge | 2 | Each Job | 1,40,000 ₹2,80,000 | 1,10,000 ₹2,20,000 | 1,00,000 ₹2,00,000 Lowest |
Tender Value
₹17.6 L
EMD Value
₹35,240
Closing Date
27 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER ABOHAR
GARRISON ENGINEER ABOHAR, ABOHAR MIL STN, PIN 152116
PROVISION OF INTERLAOCKING TILE PATH FROM GUARD POST 1 TO ROAD NEAR FD WKSP AND OTHER SANCTIONED WORKS AT FAZILKA MIL STN.
2025_MES_712987_1
TOKEN NO GE ABH-16/2025-26
Open Tender
Civil Works
Item Rate
180 days
FAZILKA MIL STN
AS PER NIT
7 documents required · 7 mandatory
₹500
GE ABOHAR
₹35,240
Yes
1 Dec 2025
6 Jun 2025
30 Jun 2025
6 Jun 2025
27 Jun 2025
13 Jun 2025
Amount
Surface excavation not exc 30 cm deep and average 15 cm in soft/loose soil and getting out all as specified and directed by Engineer-in-Charge.
M&L for hardcore of broken stone or boulders of gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface
M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub floors, sub bases, floors and pavings etc. complete all as specified.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-charge.
S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.
S&F 5mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed by Engr-in-charge.
S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame . AS per specification and drawing.
S&F Solid PVC Wall Lining consisting of 5mm thick single side colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
Supply and fixing decorative sandstone fountain of height not less than 1.80 metres and base diameter ranging from 0.45 to 0.50 metres, comprising three-tier lotus-shaped carved bowls. The fountain shall be made from high-quality natural sandstone, uniformly finished, free from cracks or structural defects. Each tier shall be elegantly carved in lotus petal form, as per the approved design and colour shade. All materials and workmanship shall conform to the approved sample. The item includes all labour, tools, and incidental civil works required for proper fixing, levelling, and anchoring at site, complete in all respects as directed by the Engineer-in-Charge
Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20 mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers for paino type fittings and for 2mm thick galvanised steel pressed sunken box suitable for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches/ socket / regulator etc, including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. (switch, socket, regulator shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ). Note:- Modular base and cover plate for fixing of modular accessories supplied suitable for as per sch "B" items.
All as per Item No.11 above here in before but for One three pins 5 Amps switch socket outlet point on independent board with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).
All as per Item No.11 above here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ).
Supply only modular switch 5/6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.
Supply only modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.
M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed.
M & L for Sub main wiring with 2 single core 4 Sqmm PVC insulated FRLS cable with multicore copper conductor drawn into and including PVC conduit rigid non metallic of suitable dia with and including independent PVC insulated one run 4 Sqmm single core copper earth wire complete all as specified. (Note:- Three lengths of 4 sqmm cable and will be measured as one length).
S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 5 to 32 Amps all as specified and directed.
S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 32 Amps all as specified and directed.
S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed.
S & F aesthetic wall lamp of 15 W having warm white colour complete suitable for wall panelling including connecting up to with 3 core flexible conductor copper of suitable size complete all as specified and directed by Engineer-in Charge,
M&L for ceiling light fitting of Skylux LED efficient LED surface 2'x2' (600X600MM) luminaire & glare free soft illumination of capacity 36Watt LED warm white colour complete suitable for roof ceailing including connecting upto with driver 3 core flexible conductor copper of suitable size complete all as specified and directed by Engr-In-charge.
S& F outddor type submersible pump ideal for fountain for water circulation with lifting capacity up to 3 meter ,oil free ,copper wounded motor operates at 240 V AC ,50 Hz and min wattage-50 W made up of high grade material ,smooth operation for water pumping purpose,complete all as directed. Note:- warranty certificate should be submitted to Engineer- in -charge.
Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 50 mm dia bore.
Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 25 mm dia bore.
Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 20 mm dia bore.
Supply and fixing GI pipe galvanised " Medium class " with all fitting laid in trenches of size 15 mm dia bore.
S & F stop valve size 25 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.
S & F bib taps, 15 mm cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed.
S & F stop valve size 50 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed.
M&L for cutting existing steel tubing laid in trenches of any size for addition and alternation as direcet by Engr-in-Charge.
M&L screwing existing steel tubing for alterations or additions or lengthening screw on pipe to from connecting with existing pipes of any size all as specified and directed.
S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core
Excavation in trenches in any type of soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC/Steel tubular poles/stays and struts etc getting out including trimming sides and forming bottom surface all as specified and directed at site.
Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site
M&L for sand cushioning to PVC/ XLPE cables with river sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured
Supplying and laying un-reinforced precast concrete cable cover, class LV, type -I, flat peak, size 250 mm x 150mm x 40mm complete all as directed by Engr - in charge
S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 2 way 240 volts suitable for incorporation of MCB's and isolators etc complete all as specified and directed..
S& F GI pipe 15 mm light grade for fountain in circular shape with equally distributed holes for fountain of diameter 9 meter connected to main inlet all as directed.
S&F warm white LED waterproof 9 watt light stainless steel, IP 68 suitable for fountains/pool adjustable neck which can be used to rotate 360 degree including connecting upto with driver 3 core flexible conductor copper of suitable size complete all as specified and directed by Engr-In-charge.
KATARIA CONSTRUCTION (BID ID -3329947)
POOJA CONSTRUCTION COMPANY (BID ID -3330666)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .