Loading
Loading…
Loading…
Tender Value
₹17.7 L
EMD Value
₹35,334
Closing Date
27 Aug 2026, 3:00 pm4d left
EE, SVPND, APWD, Sri Vijaya Puram
EE, SVPND, APWD, Sri Vijaya Puram
Repair and renovation of all roof RCC slab of Workshop-I and Workshop-II due to leakage and providing storage tank with pipe connection for drinking purpose for body repair section at Central Workshop, STS, Mohanpura under SVPND, APWD, Sri Vijaya Pur
2026_APWD_24292_1
NIT No. 43/EE/SVPND/2026-27
Open Tender
Civil Works - Buildings
Percentage
90 days
Sri Vijaya Puram
Please refer tender documents
7 documents required · 7 mandatory
₹0
₹35,334
19 Aug 2026
19 Aug 2026
28 Aug 2026
19 Aug 2026
27 Aug 2026
21 Aug 2026
19 Aug 2026 - 26 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Grading roof for water proofing treatment with | |||||
| 1.1 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | - | cum | 1 | - |
| 2Neat cement punning. | |||||
| 3Dismantling of MS rolling shutter including top cover, spring ball bearing and stacking it upto a lead of 50m all complete as per the direction of Engineer-in-charge. | |||||
| 4 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | - | kg | 1 | - |
| 5Providing and fixing aluminium composite panel (ACP) 4mm thick (0.50+3.00+50mm) on anodized aluminium frame work using JINDAL/INDAL or equivalent box section of size 50x50x2mm thick and 40x40x3mm anodized aluminium angle at not more than 0.60 mtrs centre to centre spacing as per actual requirement at curves, junctions, jointed with all necessary fixtures such as cleat agles, brackers screws etc fixed to ceiling with necessary high performance imported double side CHB tapes, structural seatant (DOWCORNING No. 789, 998) fixed so as to transfer the weight of Alcon panels (ACP) to aluminium frame work and to avoid undue stress on silicon sealant, closing the grooves (12-16mm) with weather grade silicon sealant ensuring the whole system water proof, rigid against wind using conversion resistant hardware necessary paints thermal expansion/contration mechanism etc complete as directed by Engineer-in-charge (for walling). | |||||
| 5.1 | Aluminium panelling with anodized frame | - | sqm | - | - |
| 6Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand of Tata blue scope Steel/Everest Industries Limited, JSW Steel Limited, Jindal India Limited or or equivalent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.50%), total coated thickness with aluminium zinc coating 150 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws (Xylan) of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | |||||
| 7Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: | |||||
| 7.1 | Two or more coats on new work | - | sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.13 MB
TenderDocNIT43.pdf
Tender Documents • 1.18 MB
Instructions-to-bidders.pdf
Other Documents • 0.33 MB
BOQ_25731.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].