REPLACEMENT OF 250 KVA DG SET AT DMSRDE TECHNICAL ARE AND PROVISION OF 100 KVA DG SET FOR P1 AND P2 TRANSIT FACILITY AGAINST BER DECLARED BY BOO OF 250 KVA AND DG SETS RESPECTIVE LY AT DMSRDE, KANPUR

Amount

DG SET AND ELECTRICAL WORKS

Disconnection, dismantling, shifting with in 50 Mtr lead existing 250 KVA DG Set

Disconnection, dismantling, shifting with in 50 Mtr lead existing 20 KVA DG Set

Supply installation testing & commissioning of DG Set of 3 Phase, 415 Volt 250 KVA DG Set with acoustic enclosed AMF Panel :- (i) Liquid cooled, Electronic governor (ii) 6 Cylinder 4 Stroke, 1500 RPM, HSD Fuel with exhaust pipe (iii) IP53 Rating 415 Volt class H insulation Brushless alternator (iv) IP53 Control Panel with :- (a) Display meter for voltage, current, frequency, power factor (b) Required switches and cut out, MCB, Battery Charger (c) Display parameter of Engine Speed, Lube Oil Pressure, Coolant, Cylinder Head Temperature, Engine running hours, engine battery voltage, running status, generator voltage & current generator apparent & active power, P.F, Frequency, Fuel Meter, Even Log, critical supply voltage (d) Indicators & Audio Alarm for log lube oil pressure, high water, coolant, cylinder new temp, lower fuel oil, O&W speed (v) Acoustic enclosed made out of 1.6mm thick sheet with 50mm insulation of 28 Kg/M3 density to noise level of 75 db or 1 metre (vi) 460 Ltr Fuel tank made out of 2mm thick MS sheet with fuel pipe and level indicator (vii) 2 Nos 150AH low maintenance free battery (viii) Diesel Engine and alternator shall be closed by coupled mounted on base plate/MS frame of robust construction required with Anti Vibrator mounting pads. (ix) Standard set of tools and all accessories required for installation

Supply installation testing & commissioning of DG Set of 3 Phase, 415 Volt 100 KVA DG Set with acoustic enclosed & manual control panel :- (i) Liquid cooled, Electronic governor (ii) 6 Cylinder 4 Stroke, 1500 RPM, HSD Fuel with exhaust pipe (iii) IP53 Rating 415 Volt class H insulation Brushless alternator (iv) IP53 Control Panel with :- (a) Display meter for voltage, current, frequency, power factor (b) Required switches and cut out, MCB, Battery Charger (c) Display parameter of Engine Speed, Lube Oil Pressure, Coolant, Cylinder Head Temperature, Engine running hours, engine battery voltage, running status, generator voltage & current generator apparent & active power, P.F, Frequency, Fuel Meter, Even Log, critical supply voltage (d) Indicators & Audio Alarm for log lube oil pressure, high water, coolant, cylinder new temp, lower fuel oil, O&W speed (v) Acoustic enclosed made out of 1.6mm thick sheet with 50mm insulation of 28 Kg/M3 density to noise level of 75 db or 1 metre (vi) 290 Ltr Fuel tank made out of 2mm thick MS sheet with fuel pipe and level indicator (vii) 1 No 100AH low maintenance free battery (viii) Diesel Engine and alternator shall be closed by coupled mounted on base plate/MS frame of robust construction required with Anti Vibrator mounting pads. (ix) Standard set of tools and all accessories required for installation

Supply of LT Cable

(i) Supply of 3 runs of 3.5 X 185 Sqmm Aluminium Armoured LT XLPE UG Cable

(ii) Supply of 1 runs of 3.5 X 150 Sqmm Aluminium Armoured LTXLPE UG Cable

(iii) Supply of 1 runs of 4 X 16 Sqmm Aluminium Armoured LTXLPE UG Cable

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Upto 35 Sqmm

Above 95 Sqmm and upto 185 Sqmm

Supplying and maiking end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 185 Sqmm (57mm)

3½ X 150 Sqmm (50mm)

3½ X 35 Sqmm (32mm)

40A Change over Switch (4 Pole)

Eathering with copper earth plate 600mm X 600mm X 3mm thick including accessories and providing masonry enclosure with cover plate havaing locking arrangement and watering pipe of 2.7 metre long etc. with ccharcoal/coke and salt as required.

Earthing with G.I earth plate 600mm X 600mm X 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and waterig pipe of 2.07 metre long etc. with charcoal/coke and salt as required.

Control Cable 12 Core X 2.5 Sqmm

Supplying and 25mm X 5mm G.I strip at 0.50 metre below ground as strip earth elctrode, including connection/terminating with G.I nut, bolt, spring, washer etc as required. (Jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer spaced at 50mm)

Supplying and 25mm X 5mm copper strip at 0.50 metre below ground as strip earth elctrode, including connection/terminating with G.I nut, bolt, spring, washer etc as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

SCHEDULE OF CREDIT

Old 250 KVA DG Set with Batteries all complete

Old 20 KVA DG Set with Batteries all complete

National Engineering

CLYMATE CONTROL