WELCOME MAINTENANCE OF OMQS SMQS AT RAKSHANAGAR AND DOMESTIC AREA AT AF STN OJHAR

Amount

Preparation of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots,removing nails etc., and applying one coat of white wash on walls including cornices etc.complete all as specified and as directed by Engineer in charge

Ditto -all as per serial item No.1 above but one coat of white wash on ceilings complete all as specified and as directed by Engineer in charge.

Complete Removal of existing treatment and applying two coat of Oil bound distemper over a coat of primer after smoothing of surfaces complete of wall and ceiling all as specified and as directed by Engineer in charge

M&L for 2 coat of 1.5 mm thick Birla Wall care putty on walls surfaces complete all as specified and as directed.by Engr in charge.

Preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc., and applying two coat of distemper oil emulsion white or tinted on walls including cornices etc.complete all as as specified and as directed by Engineer in charge

Preparation of new surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc., and applying two coat of distemper oil emulsion over a coat of primer white or tinted on walls including cornices etc.complete all as as specified and as directed by Engineer in charge

Preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc., and applying one coat of distemper oil emulsion white or tinted on walls including cornices etc.complete all as as specified and as directed by Engineer in charge

M&L for cleaning old surfaces by dusting, washing and applying one coat of plastic emulsion paint of berger or asian make of first quality on old surfaces etc completed and as directed by Engr in charge

Preparation of old painted surfaces of wood and wood based of any description, not otherwise described, over 10 cm width or girth including for all necessary preparatory work required and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer in charge

Preparation of old painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described include for all necessary preparatory work required and applying one coat of aluminium paint complete all as specified and directed by Engineer in charge.

Preparation of new painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described include for all necessary preparatory work required and applying two coat of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and directed by Engineer in charge.

Preparation of old painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described include for all necessary preparatory work required and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer in charge.

Preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots etc., and applying one coat of cement paint white or tinted on walls including cornices etc.complete all as specified and as directed by Engineer in charge

Material and labour for new plastered surface applying two coat of exterior acrylic emulsion (Weather coat) over a coat of exterior acrylic primer of approved colour of ASIAN/Berger/CHOKSEY/STP of equivalent all as specified and as directed.Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.

M&L for metalic texure painting including preparation of surface with wall care/synthetic putty, primer base coat & top coat in patttern/design as approved by Engr in Charge. Make ICI Paint(Dulux)/Berger/Asian

Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified.complete all as specified and as directed by Engineer-In-Charge

Taking up or down GI tubing and connections of 15mm bore including cleaning for refixing Complete all as specified and directed by Engineer-in-charge.

All as per item No.17 above but 20 mm bore.

All as per item No. 17 above but 25 mm bore .

Supply and fixing tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 15mm) complete all as specified complete all as specified and as directed by Engineer-In-Charge

All as per item No.20 above but refixing old servicable pipe .

Supply and fixing tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 20 mm) complete all as specified complete all as specified and as directed by Engineer-In-Charge

All as per item No 22 above but refixing old servicable pipe complete all as specified .

Supply and fixing tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor (Bore of pipe 25 mm) complete all as specified Make: JINDAL, TATA,. complete all as specified and as directed by Engineer-In-Charge

All as per item No 24 above but refixing old servicable pipe complete all as specified .

S& F in repair for 20 mm dia CPVC pipe as on wall , floor , ceiling , concealed etc complete and as directed by Engr in charge with all fittings and fixtured , jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed. Make : Finolex/Dutron/Ashirvad

S& F in repair for 25 mm dia CPVC pipe as on wall , floor , ceiling , concealed etc complete and as directed by Engr in charge with all fittings and fixtured , jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed Make : Finolex/Dutron/Ashirvad

Supply and fixing in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed in tank which situated up to 16m height buildingincluding necessary ladder for climbing and including replacement of GI Nipples and other fittings if required .complete all as specified and as directed by Engineer-in-Charge.

All as per item No.28 above but 20 mm bore complete all as specified.

All as per item No.28 above but 25 mm bore complete all as specified.

Labour only to adjust the float valves of 15/20/25mm dia of tanks of any capacity up to 8000 ltr capacity and upto 4 storey bldg.

Supply and fix non return valves of 20 mm dia of ISI mark pipe to existing /new GI pipes including removing and refixing the same pipe for required fitting to fix the valve etc complete and as directed by Engr in charge

S&F in repairs 10 litres capacity PVC Valveless syphonic action type flushing cistern high / low level white complete with inlet , ball valve float and handle including brackets and telescopic down pipes and jointing with WC complete complete all as specified and as directed by Engineer-In-Charge

Fixing in repairs 10 litres capacity PVC Valveless syphonic action type flushing cistern high / low level white complete with inlet , ball valve float and handle including brackets and telescopic down pipes and jointing with WC complete complete all as specified and as directed by Engineer-In-Charge

Servicing of Flushing system 10 litres capacity PVC Valveless symphonic action type flushing cistern low level . Taking down the all materials from existing cistern, Cleaned all dirt and refixing the same with making good and leakage free condition for 1 year, including repalcement of float valve, Syphone, flush washer and flush handle with all fixing arrengments complete all as direceted.

Servicing of Flushing system 10 litres capacity of Ceramic in built flushing cisterns,Valveless symphonic action type flushing cistern low level . Taking down the all materials from existing cistern, Cleaned all dirt and refixing the same with making good and leakage free condition for 1 year, including repalcement of float valve, Syphon, flush washer and flush handle with all fixing arrangments complete all as directed.

Taking down and refixing the 15mm dia CP Bib Cock/ pillar cock/ Angle cock/Concealed stop cock of any make with replacement of washer complete. The Bib cock/ pillar Cock/ Angle cock shall be fixed with Taplane tape without damageing the exising pipe lines complete. The rate includes dismanteling of tiles and making good if required

S&F in repair brass spindle for CP Bib Cock/ pillar cock/ Angle cock/Concealed stop cock of various make 15mm dia.

Supply only CP Head for CP Bib Cock/ pillar cock/ Angle cock/Concealed stop cock of various make under 15mm dia.

S&F in repair Bib tap PVC any colour/high pressure, screwed down high pressure as specified for 15mm bore .Complete all as specified and directed by Engineer-in-charge.

S&F in repair Pillar tap PVC any colour/high pressure, screwed down high pressure as specified for 15mm bore.Complete all as specified and directed by Engineer-in-charge.

S&F in repairs wash basin mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as directed. (Make : Jaquar /Prayag/Plumber or equivalent

Fixing in repairs wash basin mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as directed. (Make : Jaquar /Prayag/Plumber or equivalent.

Servicing wash basin mixer/ Wall mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including tightening, cleaning etc complete all as direceted.

S&F in repairs wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head shower,telephonic shower chromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule including dismantling of 3 No.concealed stop cock & 2 No. bib cock for each mixer (Make : Jaquar /Prayag/Plumber or equivalent complete all as specified and as directed by Engineer-In-Charge

Fixing in repairs wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head shower,telephonic shower chromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule including dismantling of 3 No.concealed stop cock & 2 No. bib cock for each mixer (Make : Jaquar /Prayag/Plumber or equivalent complete all as specified and as directed by Engineer-In-Charge

Fixing in repair Toilet paper holder chromium plated fixed with CP screws of Make Prayag/Parko/saiko

S & F in Repair Pillar taps , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Cold with long screwed shanks and flynuts , screwed for iron pipe and fixed Complete all as specified and as directed by Engineer-In-Charge.

Fixing in Repair Pillar taps , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Cold with long screwed shanks and flynuts , screwed for iron pipe and fixed Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head . Including dismantling and making good the tiles if required of make Prayag/Marc/Seiko,Complete all as specified and as directed by Engineer-In-Charge.

Fixing in Repair Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head . Including dismantling and making good the tiles if required of make Prayag/Marc/Seiko,Complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair bib taps of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule Including dismanteling and making good the tiles if requiredComplete all as specified and as directed by Engineer-In-Charge.

Fixing in Repair bib taps of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule Including dismanteling and making good the tiles if requiredComplete all as specified and as directed by Engineer-In-Charge.

S&F in Repair bib tap for Washing machine of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule of Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.

S & F in Repair brass chromium plated conceled stop cock of bore size 15 mm, in position conceled in walls/ceilings or floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces Including dismanteling and making good the tiles if requiredcomplete all as specified and as directed by Engineer-In-Charge

Fixing in repairs 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm long with connecting rod suitable for 15mm bore pipe .Complete all as specified and directed by Engineer-in-charge.

S&F in Repair CP connection 15mm size with Brass nuts, of length 600mm Complete all as specified and as directed by Engineer-In-Charge.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including fixing plugs , bedding urinal against wall in cement mortar (1:2) etc. including CP Waste fitting and PVC waste pipe.Completed all as specified and directed by Engineer-in-charge.

S & F in Repair vitreous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting . complete all as specified and as directed by Engineer-In-Charge

S & F in repairs vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge.

S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etc Complete all as specified and as directed by Engineer-In-Charge.

S&F in repairs Plastic seat cover white closed pattern with flat bottom and cover with CP hinges for EWC.

Fixing in repairs Plastic seat cover white closed pattern with flat bottom and cover with CP hinges for EWC.

S&F in Repair CP waste coupling 32 mm dia for wash basin

Ditto as in item No 64 above but 40 mm dia for Sink for ISI Marked

Fixing in Repair 32 mm PVC flexible pipe for waste outlet with threaded socket at one end.complete all as specified and as directed by Engineer-In-Charge

S & F in repairs CP health faucet special (1.5 mtr tube) with hook for EWC complete all as specified and directed by Engineer in charge

Fixng in repairs CP health faucet special (1.5 mtr tube) with hook for EWC complete all as specified and directed by Engineer in charge

Fixing in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed by Engineer-In-Charge

S & F in repairs soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-In-Charge.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. Complete all as specified and as directed by Engineer-In-Charge..

S & F in repairs Grating of 125 mm dia of stainless steel with or without waste hole Complete all as specified and as directed by Engineer-In-Charge.

Dismantling of PVC Pipes of any dia

S & F for PVC (SWR) pipes, bore of pipe in 110mm, single socketed, in any length, with rubber ring joints, laid in floors or fixed to walls Complete all as specified and as directed by Engineer-In-Charge.

S&F PVC (SWR)pipe single socketed in any length with rubber ring joints,laid in floors 75mm dia Complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repairs Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin Complete all as specified and directed by Engineer-in-charge.

S&F in repairs PVC(SWR) branch pieces, single (Single Y) equal or unequal or with parallel branches 75mm dia Complete all as specified and as directed by Engineer-In-Charge.

S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 75mm with cement solvent in position .Complete all as specified and as directed by Engineer-In-Charge.

S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 110mm with cement solvent in position Complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing PVC Cover lid for PVC water storage tank of capacity upto 2000 litres including PVC hinges and PVC .Complete all as specified and directed by Engineer-in-charge.

Dismantling water tanks of exc250 ltr but n exc 500 ltr. of any description from roof slab of building up to four storey and removing to store.complete all as specified and as directed by Engineer-In-Charge

Dismantling water tanks of exc 500 ltr but n exc 1000 ltr. of any description from roof slab of building up to four story and removing to store. complete all as specified and as directed by Engineer-In-Charge

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete and all as specified and as directed by Engineer-in-Charge

Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete and all as specified and as directed by Engineer-in-Charge.

S&F in Repair Stainless Steel Plate Rack of size 31'' x 30'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw. complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair Stainless Steel Plate Rack of size 24'' x 24'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw. complete all as specified and as directed by Engineer-In-Charge.

S&F in Repair stainless steel sinks with drainage board made of 1mm thick stainless steel sheet for kitchen or laboratory with plugs washers and waste pipe including fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm.complete all as specified and as directed by Engineer-In-Charge.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete.

S & F in repair Cast iron floor trap with CP grating weight of grating not less than 35 grams joints to waste pipe in run lead joint dia of outlet 75 mm of floor, trap with deep water seal and of heavy weight coated with tar/black bitumen paint including making good with existing surface by provision of tiles and refilling of the dismantel materials complete all as specified and directed by Engineer-in-charge.

M/L for easing of door shutters for easy closing /opening tightning of hinges or changing the position of hinges adjustment of tower bolts , sliding door bolts with new screw etc complete all as specified and directed by Engr In charge (rate includes replacement of hinges if required)

M/L for easing of window shutters of any type , kitchen cupboards shutters , show case shutter , drawers including fixing of screws for easy closing /opening tightning of piano hinges or changing the position of hinges adjustment of adjusting of handles, knobs with new screw etc including other small adjustments including repair/ replacement of CP/MS powder coated sliding channels of standrad section by complete all as specified and directed by Engr In charge

S & F in repairs floor door stoppers double legged of aluminium alloy body & tounge aluminium anodised alloy with rubber fixed with steel screws on the door frame of size 150 mm long compete all as specified as directed by Engineer -in -charge

S/F in repairs aluminium anodized hasp & staple saftey type with mild steel pin hinge including bolt to hinge plate fixed with screws of 100 mm size compete all as specified as directed by Engineer -in -charge

S & F in repairs 300 mm long and 12 mm dia CP MS door bolt with hasp and staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminimum alloy.compete all as specified as directed by Engineer -in -charge

S/F in repairs door closer hydraulically regulated designation No.2 universal type of aluminium extruded section body fixed to doors frameswt 60 to 80 Kg with screws or by welding on steel door frame complete all as specified and directed by Engr -in charge

Supply and fixing in repairs helical door spring 300mm size with roller and roller plates of mild steel incl welding to angle iron plate or fixing with wooden/steel chowkhats as required and as specified including necessary welding where ever required. Make: Heera, Universal.Complete all as specified and directed by Engineer-in-charge.

Labour only for repairing of steel window /ventilator , making good to jamb/corroded portions and hinges , oiling to hinges / replacement of broken friction hinges by box type hinges including all welding , any fabricator work , bending etc and make functionable including any small fittings required etc complete all as specified.complete all as specified and as directed by Engineer-In-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

Supply and fixing 4 mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putty (or beading) in square exc. 0.5 Sqm each Complete all as specified and directed by Engineer-in-charge.

Fixing of loose window glasses with oil putty complete with making good complete, window not exceeding 1.50 Sqm

Supply and fixing 3 mm thick figured glass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square exc. 0.5 Sqm each.Complete all as specified and directed by Engineer-in-charge.

S & F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane for steel/ aluminium windows compete all as specified as directed by Engineer -in -charge

Supply and fixing in repairs GI wire cloth power woven 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for steel window and ventilator including providing MS beads and SS screws . Complete all as specified and directed by Engineer-in-charge.

S & F in repairs GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tracks or wooden beeding patti.to gauge door shutters and wooden windows compete all as specified as directed by Engineer -in -charge

Supply and fixing in repairs Aluminium wire cloth power woven 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for Aluminium window and ventilator . Complete all as specified and directed by Engineer-in-charge.

M&L for welding in repairs exc. 2.5cm but n exc. 5cm in length, thickness of metal to welded exc 6mm but n exc 9mm for steel windows , ventilators door frames , door hinges , door springs etc compete all as specified as directed by Engineer -in -charge

S & F in repairs curtain rod of CP MS 25 mm dia not less than 1.6mm thickness with chromium plated projected bracket both side as per sample fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed by Engineer -in -charge

Dismantling of Boarding any description including shutters of existing cup boards.

S & F for 18 mm thick block board laminated on one side of commercial quality exterior Grade -I fixed with screws as in cup board shutters/shelves and pelmets box etc including lipping/beading all over shutter complete all specified and directed by Engr in charge

M/L for fancy type CB knobs of kitchen /drawer shutter as approved by Engr in charge etc complete

M/L for magnetic door lock for door shutters of CB and kitchen shutters of SS ISI mark

S&F Rubber based door bottom strip with aluminium angle not less than 25x25mm including fixing arrangement with screws properly & all as per manufacturers instruction complete all as specified and directed.

M&L for drilling holes for pipes etc in cadappa/granite including RCC slab nexc 25mm dia and nexc 100mm depth

Taking down cement plaster of any thickness, raking out joints, hacking for key scrubbing down with water including terrazzo dado or wall finish such as tiles of any description and of any thickness, including for all necessary lowing etc, removal of rubbish of the premises; removal and depositing serviceable materials where directed and leaving the work clear for any type of plastering;Complete all as specified and directed by Engineer-in-charge..

M&L for 10 mm thick cement plaster in CM 1:6 on brick surface finished even and smooth without using extra cement in patches Complete all as specified and directed by Engineer-in-charge.

ditto Item No 116 but 5 mm thick rendering in cement plaster 1:4 on ceiling in patches

M&L for 15mm thick rendering on brick/concrete surfaces on broken edges of chajjas, facia, slab, roof projectioon and any other brick/concrete surface in patch work in CM 1:4 and finishing fair and even without using extra cement with using 2% Integral water proofing compound by wt of cement (Note: Water proofing compound will be measured and paid separately under relevant item) Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.

Dito all as above item no 118 but 20mm thick in 2 coats.

Supply only integral water proofing compound

M & L for preparing plastered surfaces of walls and applying three coats of white wash compete all as specified as directed by Engineer -in -charge

M&L preparation of new plastered surface and applying 3 coats of white wash on ceiling complete.

M/L for filling floor /glazed tile joint with white cement tile grout with pigments matching with tiles including cleaning the tile surface properly

Taking down the loosen EWC/WHB/Sink of any description and refixing the same with angle support to wall for WHB and sink, for EWC screwing to floor and side joints filled with white cement for strengthening and making good complete all as directed.

M/L for removing of tree routs, shrubs and bushes from wall surface/roof top/chajjas up to 15 M height including repairing of cracks in cement mortor 1:3 in crarcked surface and making good the surface matching with existing surface including all required ladder and cosider all saftey measures upto ht 15 mts of bldg etc completed and removal of shrubs up to 50 m distance.

Removing of building materials & debries of any type the rate included i.e loading ,unloading and stacking/spreading etc outside of MD land upto 1 km with own arrangement by Contractor.

M&L to prevent leakage/seepage from roof shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexiable acrylic modified cementitious water proofing system @ 2kg/Sqm at 1mm thickness Make : Tech force 2K strong of M/s Choksey or URP admixed with cement in 1:1 propotion without waterin 1 coats of make Dr Fixit or equivelant. The Shall be tested with ponding test by Engr-in-Charge. If any failure occoured that shall be redone without any extra cost with in 24 Hrs.

M&L to prevent leakage/seepage from Nahani trap/ floor trap . Including existing trap shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexible acrylic modified cementitious water proofing system @ 2kg/Sqm at 1mm thickness Make : Tech force 2K strong of M/s Choksey or URP admixed with cement in 1:1 propotion without water in 1 coats of make Dr Fixit or equivalant. The trap Shall be tested with ponding test by Engr-in-Charge. If any failure occurs the same shall be redone without any extra cost within 24 Hrs.

M&L for dismantling the wall/floor tiles and searching the GI tubing leakage point and replace the GI tubing connections and make the position leakage free with in 48 hrs after satisfication refill the dismanteled area with matching tiles with cement mortar and making good complete all as directed.

S & F in repairs mortice locks 6 leaver brass with six lever and pair of fancy handle of CP Brass in size 100mm for aluminum doors compete all as specified as directed by Engineer -in -charge

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish. Complete all as specified and as directed by Engineer-In-Charge

M & L for 25 mm thick Cement Concrete type B 1 (1:2:4) using 20 mm graded stone aggregate as in sub bases, sub floors . Complete all as specified and as directed by Engineer-In-Charge

M & L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in Coping/Channels in side the manholes/ benching etc including formwork and making the surface even and fair Complete all as specified and directed by Engineer-in-charge.

Demolition of stone slab and tiles of any description or thickness in floors, wall all as directed.Complete all as specified and as directed by Engineer-In-Charge

M & L for coloured glazed ceramic tiles 300 mm x450 mm & 7 mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry over and including 10 mm thick bedding layer/ backing coat in CM 1:4 complete and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-In-Charge.

M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed of cement mortar 1;6 set and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed by Engineer-In-Charge..

M&L dark shade double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed of 1:6 cm complete all as specified and directed.

M&L Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green/white

Fixing only Mirror with plastic cabinet of size 550mmx400mmx75mm single door as per approved Make:- Prayag/Nilkamal

Demolition of reinforcement cement Concrete in slab, kitchen platform and other similar suspended work pavings n exc 15 cm thickness

M&L for reinforced cement concrete type B1 (1;2;4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed by Engineer-In-Charge.

S&F mild steel TMT bar of 10 mm dia and over cut to length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia.

S/F in repair SS 25 mm dia bore fancy type drapery rod /curtain rod fancy type brackets cut to length as required in sigle or doble layer of approved colour complete all as directed by Engr in charge

S/F SS fancy type end balls fixed to SS rod as approved by Engr in charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed by Engr in Charge.

Supply and fixing in repair 12mm thick toughened glass making provision of hole for all SS for glass fitting including edge polishing and drilling hole for fittings as in railing including logo etching all as specified and directed by Engr in Charge

Ditto all as item No 147 above but including SS patch fittings for single and double leaf in door all as specified and directed by Engr in Charge

Double action floor spring hydraulically regulated made ISI marked make: Dorma up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed by Engineer in Charge

Supply and fixing 18" long SS Handle Make : Shivalik for door all as specified and directed by Engineer in Charge

Supply and fixing SS lock for toughened glass door for single leaf shutter

ditto as item above but double leaf shutter

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n.exc. 1.5sqm each Complete all as specified and as directed by Engineer-In-Charge..

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50sqm and n exc 4sqm each Complete all as specified and as directed by Engineer-In-Charge..

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 10 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing compete all as specified as directed by Engineer -in -charge

S & F Factory made solid panel PVC Moulded door shutter 30 mm thick 2mm thick Prelam PVC sheet on the front face and 2mm thick Plain colour PVC sheet on back face with particle Board core compete all as specified as directed by Engineer -in -charge

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado including 10 mm thick rendering of CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete. Complete all as specified and as directed by Engineer-In-Charge

M/L for making duct for window AC in wall /window with outside MS grill of sq/round bar of 12 mm dia and inside sliding arrangement of acrylic sheet sliding type including demolition of brick work , plastering and making good the surfaces with cement plaster and plaster patta 50 mm wide all over opening to avoid rain water inside from external side and paint touchup including removal of debris up to 50 m

M/L for fancy type handles 75 mm high of kitchen shutter /CB shutter as approved by Engr in charge etc complete

Ditto as above but 100 mm high

M/L for fancy type CB knobs of kitchen /drawer shutter as approved by Engr in charge etc complete

M/L for blind shutter hinge for door shutters of CB and kitchen shutters of SS ISI mark

M/L for magnetic door lock for door shutters of CB and kitchen shutters of SS ISI mark

M/L for powder coated Aluminium louvers with aluminium frame of 40mm x 75 mm x1.6 mm thick with other acceceries as per standard sections necessary clips , frosted glass , handels for up and down of size n exc 1.0 sqm each suitable fo wc and bath ventilation etc completed and as directed by Engr in charge

M & L for anodized aluminium sliding window with anodized aluminium frame of size 92 mm x 32 mm x1.60 mm thick) of 3 Track with 1.6mm thick, with sliding shutters with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.6 mm thick) including glazing with tinted sheet glass panel 4.00mm thick, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws etc, complete.compete all as specified as directed by Engineer -in -charge

M & L for anodized aluminium openable window with anodized aluminium frame of size 92 mm x 32 mm with 1.6mm thick,openable shutters with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.6 mm thick) including glazing with tinted sheet glass panel 4.00mm thick, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws etc, complete.compete all as specified as directed by Engineer -in -charge

M/L for repairing of existing modular kitchen (n exc 2.5 sqm area) including taking down & refixing at the same location cabinet, shutters & SS Rack and repairing with required material etc.complete.(i.e. ss lock,hinge, knobs,screw,washers,telescopic channels etc.)

S/F in repairs 8 feet easy drying pully system with including aluminium pipes OD 22 mm , channel pair 24'' length , pulley of Derlin , rope 4 mm diameter DDPE double core including fitting material pouch consist of special lock assembly , channel mounting screws , rope end caps, pipe end caps, adhesive tubes , rawal plugs etc , handeles, etc to be fixed in balcony or on extenal wall surface (indoor/outdoor as required in particular location/qtr or as directed ) completed and as directed by Engr in charge.

S/F in repair replacement of unserviceable flush tank syphon only of any make and type of single flush etc completed and as directed of make prayag cat No.SP 02 or of any make equivalent in cera, slimline , hindustan , parryware etc completed .

S&F in repairs for 100mm Butt hinges, medium weight, cold rolled mild steel, all as specified and directed

Cleaning of old PVC water tank of capacity exc.250 & n. exc. 500 lit. removing all scale and dirt using detergent powder and bleaching powder etc from tanks and from mouth of pipe etc, and hoisting if required and reconnecting to the pipe and writing of cleaning date on tank with paint after removing the old cleaning date complete all as specified & as directed by Engineer in charge.

Cleaning of old PVC water tank of capacity exc.500 & n. exc. 1000 lit. removing all scale and dirt using detergent powder and bleaching powder etc from tanks and from mouth of pipe etc, and hoisting if required and reconnecting to the pipe and writing of cleaning date on tank with paint after removing the old cleaning date complete all as specified & as directed by Engineer in charge. For Item No 171,172 Note : Tank after cleaning shall be shown to the user and got signed by the user and put up to Engr-in-Charge weekly for verification. Any damage to ball cock, float valve, checknuts and any leakage/ any interruption in water supply occured due to negligence of Contractor the same shall be rectified by the Contractor and nothing shall be paid extra on this account.

S&F in repairs 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repairs 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S&F in repairs 150mm long Extruded aluminium alloy handles, fabricated type, anodised

S&F in repairs 15mm 2 way CP bib cock/angle cock

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each

M&L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

All as above but size 65x100mm complete as per direction of Engineer-in-Charge.

All as above but size 65x100mm double rebate complete as per direction of Engineer-in-Charge.

M&L for 35mm Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush/skeleton door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and Supply & fixing with stainless steel butt hinges(3nos/door), 1SS Handle, 1 SS Door stopper of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge.

All as above item no. but 18mm thick as in cupboard shutters

Dismantling boarding, any description, fixed in any position with nails/screws

S & F for 18 mm thick block board laminated on one side of commercial quality exterior Grade -I fixed with screws as in cup board shutters/shelves and pelmets box etc including lipping/beading all over shutter complete all specified and directed by Engr in charge

M&L for 35mm Flush/skeleton shutters, solid core construction, but with particle board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match

Factory made single extruded WPC (Wood Polymer composite) solid plain flush foor shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 modulus of elasticity 850 N/mm2 and resistance to spread of flame of class category with property of being termite/ borer proof, water/mouisture proof and fire retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed S.S screws, all as per direction of Engineer-in-Charge. (Note: Rate is inclusive of stainless steel butt hinges (03Nos/foor), 1 SS Handel, 1 SS door stopper of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge.

M&L for 35mm 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F in repairs SS swan neck/ flexible type bib cock either wall mounted/pedestal/table mounted of approved make as specified and directed by Engr in charge.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (GdeE- 250) qualityA

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including gall quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L Brick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1 : 6 all as specified and directed by Engr-in-Charge

Labour only for brickwork (except bricks) straight or curved on plan exc 6m mean radius, built in CM 1 : 6 all as specified and directed by Engr-in-Charge

Material and labour for providing Aluminium shutter with powder coated frame 88.9mmx47.63mmx1.60 mm thick and size of shutter with top rail , middle rail and bottom rail and style of size 85 mm x 44.5 mm x 1.56 mm thick with 200 mm size powder coated 2 nos with each leaf , Heavy duty powder coated aluminium tower bolt 150mm long 2 Nos per leaf, 3 nos Heavy duty aluminium powder coated hinges of size 125mm with each leaf including 12 mm thick both side prelaminated particle board / 5.5 mm thick glass pane in the both panel with necessary joining cleats, rubber packing, aluminium beading, hydraulicc door closer ,screws etc complete all as specified and as directed Note - All fitting shall be of same finish as of door shutter and shutter may be single/ double leaf, if the shutteris more than 1.10mtr it shall be of double leaf, the hollow section of vertical style where the hinges are to be provided the complete vertical style shall be provided with soft wood and minimum 65mm long screw provided for fixing of hinges compete all as specified as directed.

Repairs to aluminium door shutter of any description and size including taking down from frames for realignment and tightening including adjusting the shutter removal and refixing hydraulic or floor door spring , and hinge , refixing shutter in same opening with all necessary repairs /refixing ,including replacement of damaged jointing cleats ,glazing clips , rubber packing ,aluminium beading , screws etc also including provision of 6 mm dia through bolt with nut on both side for top and bottom rail. complete all as specified and as directed by Engineer-in-charge. ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building) Hydraulic door closer/ door spring if preplaced under separete items

Ditto as Item No.195 But Aluminium windows of any type/ mechanicium except of Hydraulic / floor door spring. Wire mesh/ glass shall be paid under separate item above the rates includes replacement of rollers/ sliding arrangement/locking arrengments/ any types of hinges .if during repalcement of wiremesh/ glass window requires dismanteling of complete window with frames and shutters the same shall be carried out and the rates are deemed to included such provisions under this item and nothing shall be paid extra.

M&L for writing letters or figures (Block,Roman,italic or Indian) n.exc 30cm high

M&L for repair to RCC structure using microconcrete all as per manufactures's instruction as described below complete all as specified and as directed. (a) Chipping off existing loose and damaged /crack/plaster surfaces at location decided by Engr-in-charge to depth not exceeding 100mm using pneumatic tools or with chiseling and wire brushes, descale the exposed surfaces of reinforcement with wire brushes, removing all loose rust scales from rebar blowing all loose dust with blower and washing concrete surfaces. A coat of alkali rust converting primer shall be applied on the reinforcement bars. (b) Welding additional reinforcement bars were dia of existing bars is found reduced than specified limit as directed. (Reinforcement bar shall be measured and paid separately). (c) Applying a coat of anti corrosive protective coating on both of old and new reinforcement bar surfaces as per manufacturers instructions. (d) Applying a coat of epoxy resin concrete bonding agent to exposed concrete surfaces and rebars. (e) Providing polymer modified cement mortar in specified composition for complying manufacturers instructions ( thickness varies from 25mm to 100mm). NOTES :- (i) the cost of necessary scaffolding & formwork shall be deemed to be included in the quoted rate. (ii) The work shall be carried out upto G+4 floors. Note: (Applicable to all item No 1 to 198) 1.The contractor shall deploy skilled tradesmen i.e. 01x carpenter, 01 x plumber, 01 Mason with helpers and required T&P , complaints slips will be issued daily in the morning from AGE B/R office and it shall be collected by the contractor/supervisor and same shall be resubmitted by evening after completion of alloted job duly signed by user . The complaint book shall be made by the Contractor as sample given by Deptt. No extra shall be paid on this account & rates are deemed to be included. 2.In case of failure to attend the complaint within 48 hrs the contractor shall be liable for double recovery quoted by the contractor with each connecting item not attending complaint. 3. Due to comprehensive maintenance work, The work shall be executed in various bldgs of Rakshanagar, RCMA and HAL technical area with small patch work/Small number complaints upto completion of Contract. This is applied to all items mentioned above. No extra shall be paid on this account & rates are deemed to be included .

Apachi Systems (BID ID -3380314)

M/s.TIRUPATI BUILDERS (BID ID -3372495)

MAHIMA CONSTRUCTION (BID ID -3371347)