Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC BAZAR RAM SUKH DASS FEROZEPUR CITY 152002 PB | FIROZEPUR | PUNJAB | 152002 | ₹31.9 L Quoted ₹32.7 L | L1 | Accepted-AOC Due to lowest bid |
| 2 | L2₹34.0 LRejected-Finance | ₹34.0 L | L2 | Rejected-Finance Due to higher bid |
| 3 | L3₹34.0 LRejected-Finance | ₹34.0 L | L3 | Rejected-Finance Due to higher bid |
| 4 | L4₹34.2 LRejected-Finance | ₹34.2 L | L4 | Rejected-Finance Due to higher bid |
| 5 | L5₹34.3 LRejected-Finance | ₹34.3 L | L5 | Rejected-Finance Due to higher bid |
| Sl No | Description | Qty | Unit | Kissan contractor and engg works L8 | M/S Pee Kay Builders L7 | JAWAHAR CONSTRUCTION COMPANY L4 | RAKESH KUMAR SATISH KUMAR L1 | manoj and company L3 | M/s Bansi Lal L2 | KAILASH CONSTRUCTION COMPANY L5 | M/s Syal Construction Co. L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of defective centrifugal sewage motor complete of capacity 5 HP-10 HP by removing cable connection from LT panel and taking out carefully from sewage sump well and inspect the same, transporting to repair workshop for repair. Reassembling after repair and testing, transporting back to sewage well re-installation by connecting electric cable to LT panel and testing complete all as specified and directed.
Notes :-
(i) The quoted rate shall include the cost of making standby arrangements to avoid any type of breakdown by installing standby motor/pump sets, all as directed by the Engineer-in-Charge.
(ii) Minor items costing up to Rs. 300/– (e.g., gland packing, nuts and bolts, insulation tape, rubber seals, hozing bushes, etc.) shall be deemed to be included in the quoted rate.
(iii) Spare parts required for repairs shall be measured and paid for separately under the relevant item of Schedule 'A' as “Supply Only.”
(iv) Labour required for dismantling the defective pump set, removing the defective spare parts, and reassembling after fixing the new spares shall be deemed to be included in the quoted rate.
(v) The contractor shall send his representative daily to the E/M yard to receive complaints. After receiving a complaint, the contractor shall rectify the issue within 24 hours. In case of failure to do so for any reason, a penalty of Rs. 1500/- per day shall be imposed.
ing complaint contracter will rectified bottleneck with in 24 Hrs if fail for any reason,a fine of Rs 1500/- per day | 6 | Each Job | 2,100 ₹12,600 | 2,060 ₹12,360 | 2,070 ₹12,420 | 2,000 ₹12,000 | 2,050 ₹12,300 | 2,197 ₹13,182 | 2,115 ₹12,690 | 2,150 ₹12,900 |
| 1.01 | Supply only deep groove ball bearing suitable for 5 to 10 HP Motor complete all as specified and directed. | 6 | Each | 1,010 ₹6,060 | 940 ₹5,640 | 1,010 ₹6,060 | 1,000 ₹6,000 | 1,022 ₹6,132 | 1,001 ₹6,006 | 1,032 ₹6,192 | 1,030 ₹6,180 |
| 1.02 | Supply only PVC fan complete suitable for 5 to 10 HP motor complete all as specified and directed. | 3 | Each | 590 ₹1,770 | 610 ₹1,830 | 640 ₹1,920 | 600 ₹1,800 | 613 ₹1,839 | 644 ₹1,932 | 654 ₹1,962 | 600 ₹1,800 |
| 1.03 | Supply only shaft complete suitable for 5 to 10 HP motor complete all as specified and directed. | 1 | Each | 5,160 ₹5,160 | 5,000 ₹5,000 | 5,110 ₹5,110 | 4,700 ₹4,700 | 4,802 ₹4,802 | 5,006 ₹5,006 | 4,914 ₹4,914 | 4,960 ₹4,960 |
| 1.04 | Supply only coupling set complete suitable for 5 to 10 HP motor complete all as specified and directed. | 2 | Each | 970 ₹1,940 | 970 ₹1,940 | 980 ₹1,960 | 1,000 ₹2,000 | 1,022 ₹2,044 | 1,032 ₹2,064 | 1,001 ₹2,002 | 990 ₹1,980 |
| 1.05 | M&L for rewinding of centrifugal electric motor cap 5-10 HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified.
Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning. | 1 | Each Job | 9,740 ₹9,740 | 9,550 ₹9,550 | 9,880 ₹9,880 | 8,700 ₹8,700 | 8,889 ₹8,889 | 9,819 ₹9,819 | 10,329 ₹10,329 | 9,610 ₹9,610 |
| 2.00 | All as per Srl item No 1.00 here-in-before but for capacity of 20 HP pump set. | 1 | Each Job | 3,640 ₹3,640 | 3,290 ₹3,290 | 3,590 ₹3,590 | 3,700 ₹3,700 | 3,780 ₹3,780 | 3,699 ₹3,699 | 3,882 ₹3,882 | 3,930 ₹3,930 |
| 2.01 | Supply only deep groove ball bearing suitable for 20 HP Motor complete all as specified and directed. | 1 | Each | 2,450 ₹2,450 | 2,490 ₹2,490 | 2,570 ₹2,570 | 2,200 ₹2,200 | 2,248 ₹2,248 | 2,340 ₹2,340 | 2,319 ₹2,319 | 2,210 ₹2,210 |
| 2.02 | Supply only shaft complete suitable for 20 HP motor complete all as specified and directed. | 1 | Each | 10,200 ₹10,200 | 10,000 ₹10,000 | 10,020 ₹10,020 | 10,200 ₹10,200 | 10,421 ₹10,421 | 11,198 ₹11,198 | 10,769 ₹10,769 | 10,960 ₹10,960 |
| 2.03 | Supply only coupling set complete suitable for 20 HP motor complete all as specified and directed. | 1 | Each | 2,730 ₹2,730 | 2,550 ₹2,550 | 2,730 ₹2,730 | 2,600 ₹2,600 | 2,656 ₹2,656 | 2,616 ₹2,616 | 2,697 ₹2,697 | 2,690 ₹2,690 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
3 Nov 2025, 6:00 pmClosed
GE (WEST) FEROZEPUR CANTT
GE (WEST) FEROZEPUR CANTT
REPAIR MAINTENANCE OF NC SEWAGE PUMPSETS INCLUDING MUG STARTERS AND PANEL BOARDS AND REPAIR MAINTENANCE SEWAGE INSTALLATIONS IN THE AREA OF WEST OF JHOKE ROAD GE (WEST) FEROZEPUR CANTT
2025_MES_730161_1
802025/GE-60/E8
Open Tender
Civil Works
180 days
FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (WEST) FEROZEPUR CANTT
₹70,000
Yes
8 Jan 2026
13 Oct 2025
10 Nov 2025
13 Oct 2025
3 Nov 2025
27 Oct 2025
Amount
Supply only deep groove ball bearing suitable for 5 to 10 HP Motor complete all as specified and directed.
Supply only PVC fan complete suitable for 5 to 10 HP motor complete all as specified and directed.
Supply only shaft complete suitable for 5 to 10 HP motor complete all as specified and directed.
Supply only coupling set complete suitable for 5 to 10 HP motor complete all as specified and directed.
M&L for rewinding of centrifugal electric motor cap 5-10 HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.
All as per Srl item No 1.00 here-in-before but for capacity of 20 HP pump set.
Supply only deep groove ball bearing suitable for 20 HP Motor complete all as specified and directed.
Supply only shaft complete suitable for 20 HP motor complete all as specified and directed.
Supply only coupling set complete suitable for 20 HP motor complete all as specified and directed.
M&L for rewinding of centrifugal electric motor cap 20 HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified and directed. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.
All as per Srl item No 1.00 here-in-before but for capacity 40 HP pump set.
Supply only deep groove ball bearing suitable for 40 HP Motor complete all as specified and directed.
Supply only shaft complete suitable for 40 HP motor complete all as specified and directed.
Supply only coupling set complete suitable for 40 HP motor complete all as specified and directed.
M&L for rewinding of centrifugal electric motor cap 40HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified and directed. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.
All as per Srl item No 1.00 here-in-before but for capacity 50 HP - 60 HP pump set.
Supply only deep groove ball bearing suitable for 50 HP - 60 HP Motor complete all as specified and directed.
Supply only shaft complete suitable for 50 HP - 60 HP motor complete all as specified and directed.
Supply only coupling set complete suitable for 50 HP motor complete all as specified and directed.
M&L for rewinding of centrifugal electric motor cap 50 HP - 60 HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning. minimum.
Supply only impeller suitable for 5-10 HP pump complete all as specified and directed.
Supply only parallel key suitable for 5-10 HP pump complete all as specified and directed.
Supply only sleeve suitable for 5-10 HP pump complete all as specified and directed.
Supply only deep groove ball bearing suitable for 5-10 HP pump complete all as specified and directed.
Supply only mechanical seal suitable for 5-10 HP pump complete all as specified and directed.
All as per Srl item No 5.00 here-in-before but suitable for 20 HP pump complete all as specified and directed.
Supply only impeller suitable for 20 HP pump complete all as specified and directed.
Supply only parallel key suitable for 20 HP pump complete all as specified and directed.
Supply only sleeve suitable for 20 HP pump complete all as specified and directed.
Supply only deep groove ball bearing suitable for 20 HP pump complete all as specified and directed.
Supply only mechanical seal suitable for 20 HP pump complete all as specified and directed.
All as per Srl item No 5.00 here-in-before but suitable for 40 HP pump complete all as specified and directed.
Supply only impeller suitable for 40 HP pump complete all as specified and directed.
Supply only parallel key suitable for 40 HP pump complete all as specified and directed.
Supply only sleeve suitable for 40 HP pump complete all as specified and directed.
Supply only deep groove ball bearing suitable for 40 HP pump complete all as specified and directed.
Supply only mechanical seal suitable for 40 HP pump complete all as specified and directed.
All as per Srl item No 5.00 here-in-before but suitable for 50 HP-60 HP pump complete all as specified and directed.
Supply only impeller suitable for 50 HP - 60 HP pump complete all as specified and directed.
Supply only parallel key suitable for 50 HP - 60 HP pump complete all as specified and directed.
Supply only sleeve suitable for 50 HP-60 HP pump complete all as specified and directed.
Supply only deep groove ball bearing suitable for 50 HP - 60 HP pump complete all as specified and directed.
Supply only mechanical seal suitable for 50 HP - 60 HP pump complete all as specified and directed.
Supply only shaft complete suitable for 2/3 HP motor complete all as specified and directed.
Supply only lower bearing complete suitable for 2/3 HP motor complete all as specified and directed.
Supply only upper bearing complete suitable for 2/3 HP motor complete all as specified and directed.
Supply only mechanical seal complete suitable for 2/3 HP pump complete all as specified and directed.
Supply only impeller complete suitable for 2/3 HP pump complete all as specified and directed.
M&L for rewinding of submersible electric motor cap 2/3 with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as required. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.
All as per Srl item No 6.00 above here-in-before but suitable for 5 HP motor pumpset complete all as specified and directed.
Supply only shaft complete suitable for 5 HP motor complete all as specified and directed.
Supply only lower bearing complete suitable for 5 HP motor complete all as specified and directed.
Supply only upper bearing complete suitable for 5 HP motor complete all as specified and directed.
Supply only mechanical seal complete suitable for 5 HP pump complete all as specified and directed.
Supply only impeller complete suitable for 5 HP pump complete all as specified and directed.
M&L for rewinding of submersible electric motor cap 5 with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as specified and directed. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.
All as per Srl item No 6.00 here-in-before but suitable for 7.5 HP motor pumpset complete all as specified and directed.
Supply only shaft complete suitable for 7.5 HP motor complete all as specified and directed.
Supply only lower bearing complete suitable for 7.5 HP motor complete all as specified and directed.
Supply only upper bearing complete suitable for 7.5 HP motor complete all as specified and directed.
Supply only mechanical seal complete suitable for 7.5 HP pump complete all as specified and directed.
Supply only impeller complete suitable for 7.5 HP pump complete all as specified and directed.
M&L for rewinding of submersible electric motor cap 7.5 with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as required. Note :- The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.
All as per Srl item No 6.00 here-in-before but suitable for 15 HP to 17.5 HP motor pumpset complete all as specified and directed.
Supply only rotor with shaft complete suitable for 15 HP to 17.5 HP motor complete all as specified and directed.
Supply only lower bearing complete suitable for 15 HP to 17.5 HP motor complete all as specified and directed.
Supply only upper bearing complete suitable for 15 HP to 17.5 HP motor complete all as specified and directed.
Supply only mechanical seal complete suitable for 15 HP to 17.5 HP pump complete all as specified and directed.
Supply only impeller complete suitable for 15 HP to 17.5 HP pump complete all as specified and directed.
M&L for rewinding of submersible electric motor cap 15 HP to 17.5 HP with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as required. Note :- The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.
Carrying out servicing/maint of 100/125 KVA DG set, Make : 'Greaves/Kirloskar' including 'B' check as per manufacturers mannual through authorised dealer of DG set manufacturer of existing DG Make and testing of DG set complete all as specified and directed. Note :- All material/spares parts required for carrying out above maintenance/servicing shall be measured and paid separetely as 'Supply only' items as mentioned below and shall be of make-Greaves/Kirloskar/Cummins as per make of DG set and labour element required for replacing the spares parts including replacement of minor spare parts which are essential for carrying out servicing/maintenance of DG sets shall deemed to be included in the unit rate quoted by the tenderer.
Supply only Lub oil filter cartrige
Supply only Diesel filter insert
Supply only Fuel pre filter
Supply only Air clean element secondary
Supply only Hose pipe & Flexible pipe complete set.
Supply only Fan belt for alternator dynamo (make-Fenner/ Poly-F/Roulunos).
Crank shaft assy with gear
Fuel pump assembly
Exhaust Silencer
Carrying out servicing/maint of 50-62.5 KVA DG set, Make : 'Greaves/Kirloskar' including 'B' check as per manufacturers mannual through authorised dealer of DG set manufacturer of existing DG Make and testing of DG set complete all as specified and directed. Note :- All material/spares parts required for carrying out above maintenance/servicing shall be measured and paid separetely as 'Supply only' items as mentioned below and shall be of make-Greaves/Kirloskar/Cummins as per make of DG set and labour element required for replacing the spares parts including replacement of minor spare parts which are essential for carrying out servicing/maintenance of DG sets shall deemed to be included in the unit rate quoted by the tenderer.
Supply only Lub oil filter
Supply only Fuel filter insert
Supply only Air clean element
Supply only Hose pipe & Flexible pipe complete set.
Supply only Fan belt for alternator dynamo (make-Fenner/ Poly-F/Roulunos).
Supply only Exhaust Silencer
Carrying out servicing/maint of 15 KVA-30 KVA DG set, Make : 'Greaves/Kirloskar' including 'B' check as per manufacturers mannual through authorised dealer of DG set manufacturer of existing DG Make and testing of DG set complete all as directed by Engineer-in-Charge. Note :- All material/spares parts required for carrying out above maintenance/servicing shall be measured and paid separetely as 'Supply only' items as mentioned below and shall be of make-Greaves/Kirloskar/Cummins as per make of DG set and labour element required for replacing the spares parts including replacement of minor spare parts which are essential for carrying out servicing/maintenance of DG sets shall deemed to be included in the unit rate quoted by the tenderer.
Supply only Lub oil filter
Supply only Fuel filter insert
Supply only Air clean element
Supply only Hose pipe & Flexible pipe complete set.
Supply only Fan belt for alternator dynamo (make-Fenner/ Poly-F/Roulunos).
Repair/servicing of radiator assembly of 125 KVA DG Set (Greaves/Kirloskar/Cummins) after dismanteling and removing cooling fans, guard plates and lowering the same from engine after draining out water from radiator and scrapping / removing sludge / scale inside tank with acid including replacement MS tank (botom portion) at rusted portion by cutting/ welding / brazing with 2mm thick copper plate including painting. Remounting the same at its original position and repalcement of pre mixed coolent as per the ratio fixed by manufacturer and testing complete all as specified and directed. Note- Pre mixed coolent shall be measured and paid for separately under relevant item of schedule.
All as per Srl item No. 16 here-in-before for 50 to 62.5 KVA KVA DG Set of Greaves /Cummins / Kirloskar make.
S&F in replacement of new Self starter, auto lock, 12/24V of existing make, on the 125 KVA DG Set and taking out unserviceable self starter from DG set complete all as specified and directed.
All as per Srl item No. 18 but for 50- 62.5 KVA DG Set.
Taking down unserviceable Self starter from the DG Set 15-125 KVA including dismantling the Self starter and taking out burnt winding armature & field coil and cleaning the slot including re winding of armature, field coil with enameled copper conductor of existing gauge including insulating material and heat varnish. Replacing worn out armature auto lock-01PC,Carbon brushes set, Pinion set, copper bush Set, Guard piece rubber, carbon rocker, Solinoid coil and reassembling the Self starter and mounting on its original position by replacing worn out nut bolts washers including painting of self starter complete all as specified and directed.
Dismantling and opening of turbo charger assembly of 62.5KVA to 125 KVA DG Set and Supply and fixing of turbo charger kit including refixing, testing complete all as specified and directed.
Repair/Servicing of water pump and replacement of water kit and water seal of 15 KVA to 125 KVA DG Set ccomplete all as specified and directed.
Dismantling and taking down alternator assembly from existing engine and transporting to workshop and carry out servicing / maintenance of alternator unit of capacity 125 KVA DG set as per the phase work :- (a) Opening of Alternator and cleaning / remvoing dust from armature and field coil. (b) Cleaning of used / old lubricated substances drive/non drive end bearings. (c) Cleaning end cheeking of AVR unit (d) Cheking and tighting of coupling bolts and replacement of rubber inserts. (e) M&L for carrying out heat varnishing for field and armature coil and kept in heating chamber for 48 hours for drying properly. (f) Replacement of Bearings as per existing size. (g) Reassembling complete unit and carrying out testing at workshop and transportation to installation and coupling with DG Set including necessary alignment, cable connections complete all as specified and directed.
All as per Srl item No 24 here-in-before but for 15 KVA to 30 KVA DG set.
All as per Srl item No 26 here-in-before, but for 62.5 KVA DG set.
Supply only Ball bearing suitable for 62.5 to 125 KVA DG set
Taking out unserviceable diesel tank 100 to 300 Litres for 62.5 to 125 KVA DG set and S&F new fabricated diesel tank less than suitable Capacity 14 Gauge CRCA sheet duly painted with fuel indicatior which is to be fitted in existing canopy without making any damage to canopy,including replacement of glass wool insulation 80 mm thick density 30 Kg per Cum, which is covered with NET GP Sheet stainless steel with the help of rivets for all over canopy of DG set ,reparing of unserviciable top cover of DG set duly painted and replacement of rubber beading of existing shape and size all along the periphery of the doors complete all as specified and as directed.
M&L for dismantling, opening of diesel engine cylinder head, removal of unservieable worn out spare parts, cleaning of all components, reboring of cylinder on lathe machine, after reboring honning process will be carrred out,replacement of all spare parts and gaskets as per manufacturer spare part kit, re-assembling of complete engine setting, timing setting for the capacity of 62.5-125 KVA DG set complete all as specified and as directed. Note:- Spare parts shall be measured and paid for seperately under respective item of BOQ.
Supply only Piston ring set suitable for 62.5-125 KVA DG Set of existing make complete all as specified and as directed.
Supply only Main bearing set suitable for 62.5 to 125 KVA DG Set of existing make complete all as specified and as directed.
Supply only Oil pump assembly with drvg gear suitable for 62.5 to 125 KVA DG Set of existing make complete all as specified and as directed.
Supply only Valve (inlet and outlet valve) suitable for 62.5 - 125 KVA DG Set of existing make complete all as specified and as directed.
S&F in replacement ofHead gasket suitable for capacity of of DG set 125 KVA complete all as specified and as directed.
S&F in replacement of sheet metal enclosure type change over switch on load front handle four pole 415 volts 50 Hz 200 Amps including mounting arrangement of metallic frame work of appropriate section and size on walls or panels complete all as specified and as directed. Makes:- Havells/L&T/C&S Note:- Making connections to the electric system, including cutting of cable of any size and type, making end termination by using suitable lugs is included in the rate quoted under this item.
Disconnecting, taking out carefully old unserviceable AVR unit, supply & fixing, connecting and testing new AVR unit as per existing make and model suitable for DG set of 125KVA capacity complete all as specified and directed. Makes:- Kirloskar/National/ Universal/cummins
Supply only lubrication oil SAE-40 ( 15 W- 40 grade) of make "Valvoline" as approved by GE complete all as specified and directed.
Supply and filling of inhibitor corrosion (Fleet-Guard make Coolant) suitable for radiators of 18.75 KVA to 125 KVA capacity DG set complete all as specified and directed.
S&F as in repair stainless steel locking arrangement for DG set canopy gates rating from 15 KVA to 125 KVA complete all as specified and directed.
M&L for repair of hinges of gate of DG set conopy incl the repair of gate of any cap all as specified and directed.
Supply Battery Terminals Copper.(Positive & Nagative) complete all as specified and directed.
Supply Battery Copper cable Red with plug complete (1 Mtr Length) complete all as specified and directed.
Supply Battery Copper cable Black with plug complete (1 Mtr Length) complete all as specified and directed.
S&F of Submersible Copper cable 3 core, 6 sqmm including lowering/lifting of submersible pump set complete all as specified and directed. Makes : Finolex/CCI /GLOSTER.
S&F of Submersible Copper cable 3 core, 10 sqmm including lowering/lifting of submersible pump set complete all as specified and directed. Makes : Finolex/CCI /GLOSTER.
S&F of Submersible Copper cable 3 core, 16 sqmm including lowering/lifting of submersible pump set complete all as specified and directed. Makes : Finolex/CCI /GLOSTER.
S&F of Submersible Copper cable 3 core, 25 sqmm including lowering/lifting of submersible pump set complete all as specified and directed. Makes : Finolex/CCI /GLOSTER.
S&F LED Bldg security light 45 watts, pressure die cast aluminium housing ,heat resistane toughened glass with frame,IP 66 protection with bracket (for housing street light fittings) made of GI pipe 40 mm dia light grade 1.20 mtrs long duly cutted and welded at an angle of 120 degree and fixed to wall with 50 mm X 6 mm MS clamps - 02 Nos with 16 mm dia bolts,nuts,and washers complete all as specified and directed incl taking down of old unserviceable fitting of any type.complete all as specified and directed.
S&F LED flood light fitting 100 watts, pressure die cast aluminium housing, heat resistane toughened glass with frame, IP 66 protection with bracket for housing flood light fittings complete all as specified and directed including taking down of old unserviceable fitting of any type complete all as specified and directed. Makes:- Crompton Cat Part No LSFN-120-CDL/60/M or techno-commercially equivalent in approved makes.
Supply only LED cluster indicator lamp Red, Blue, Yellow complete all as specified and directed.
Supply, Laying, testing in replacement of undergroud cable XLPE insulated, screened, PVC bedded galvanized steel strip armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 95 sqmm 3.5 core complete all as specified and directed. Note : Cable shall be replaced from LT Panel near transformer to LT panel inside the Pump House on surface only.
All as per Srl item No 59 here-in-before but for 70 Sqmm 3.5 Core complete all as specified and directed.
All as per Srl item No 59 here-in-before but for 50 Sqmm 3.5 Core complete all as specified and directed.
S&F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed.
S&F MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed.
S&F in replacement moulded case circuit breakers 4 pole 100 Amps having breaking capcity 16 KA at 415 volts complete all as specified and directed. Makes:- L&T or equivalent in Havell's/Siemens.
S&F in replacement moulded case circuit breakers 4 pole 63 Amps having breaking capcity 16 KA at 415 volts complete all as specified and directed. Makes:- L&T or equivalent in Havells / Siemens .
M&L for cleaning of Sump Well with opening of choked/jammed suction/delivery all lines of sewage pump in sump well ( size upto 10 mtr dia and 10 mtr depth max) fitted with submersible sewage pumpset of capacity upto 60 HP by rodding , air presure or other mechanical means for removing of setteled down sludge at the bottom of sump well and made the line severiciable all as directed. Note :- Any other work reqd for cleaning the choked lines/removal of sludge includes elctrician work, plumbing works or mechanical means reqd if any is deemed to be included in quoated rate
Shifting of Motor coupled Centrifugal Pumpset of any Capacity into Sumpwell including Machining, Forming, welding works alongwith its Dismantling, removing cable connection, Lowering, Reassembling, cable jointing and testing all as specified and directed.
Supply and fix in repair for cast iron sluice valve suitable for 150mm bore CI pipe flanged type, class PN-1.6 with brass spindle both ends flanged conforming to IS 14846 , including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed. Makes:- Kirlosakar/leader/ Kartar/BIR
S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 200 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers fixed in repair complete all as specified and directed. Makes:- Kirlosakar/leader/ Kartar/BIR
S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 150 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers fixed in repair complete all as specified and directed. Makes:- Kirlosakar/leader/ Kartar/BIR
S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 100 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed . Makes:- Kirlosakar/leader/ Kartar/BIR
M&L in repalcement of rusted/unserviceable MS clamp of suitable size with nut,bolts & washers complete for hanging of submersible pump set with column pipes in bore well any size/cap and MS Cap of suitable size as casing cover of bore well complete all as specified and directed.
M&L in replacement of Cast iron specials, ISI marked such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing,decreasing or double socket etc.) Tee piece single branch."Y" junction,double branch,cross(all sockets or socket and spigot collars,caps and plugs upto 300 mm bore complete all as specified and directed.
M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth electrode GI strip 25 x 4mm dia connected to GI earth plate electrode by means of bolts, nuts, check nuts and washers of galvanized iron and thimbles and other end of earth wire connected to main switch board and protected by galvanized iron light grade 40mm bore and GI pipe 20mm bore medium grade with funnel and wire mesh for watering including necessary excavation and earth works. PCC chamber in cement concrete (1:3:6) type C-2 using graded stone aggregate and RCC cover in M-25 (Design mix) and all as shown in Electrical Plate No. 3 of MES Schedule (Part-I) of 2009 complete all as specified and directed.
M&L for color code painting over the complete CI pipe line of Sewage Pump House with two coats of Black synthetic enamel paint after one coats of red synthetic enamel paint complete all as specified and directed.
Testing of Treated and Untreated water STP Sample by obtaining samples from STP and submission of Phsiochemical Analysis Report with all parameters i.e PH, TSS, BOD,COD etc complete from laboratory approved by MES complete all as specified and directed.
M&L for MS black column pipe heavy duty coated with black water proof enamel paint both ends flaged suitable for lowering of submersible pump, 10 feet in length of 150mm dia as per IS 1239 (I) complete all as specified and directed.
M&L for MS black column pipe heavy duty coated with black water proof enamel paint both ends flaged suitable for lowering of submersible pump, 10 feet in length of 100mm dia as per IS 1239 (I) complete all as specified and directed.
Supply Installation testing and commissioning of retrofit emission control device for 100 kVA desiel generator of any make- Chakra Innovation Application :- Reduce particulate matter (PM 2.5), Carbon Monoxide and Hydrocarbons emitted from Diesel Engine Technology/Type :- ESP (Electrostatic Precipitator), Wet Scrubbing, Diesel Oxides Catalyst Guaranteed specified Particulate matter (PM 2.5) Carbon Monoxide, Hydrocarbon reduction efficiency (Min) Guaranteed specified Particulate matter (PM 2.5) Carbon Monoxide, Hydrocarbon reduction efficiency. Retrofit device is to be installed in place of existing silencer. No soot is to be collected in the retrofit device. The device including enclosure should include an Oxidation chamber and Passive Regeneration Trap. Min Particular Matter Reduction 85% Min Carbon Monoxide and NOX Reduction 90% Min Hydrocarbon Reduction 90% NOTE: It is mandatory to produce the Type approval certificate for asked KVA RATINGS ( ENGINE FAMILY) with registration number & date (from one of the CPCB recognized approved lab in Cover – 1 bid with application of tender documents . If contractor failed to upload the same in Cover-1, bid will be rejcted in Cover-1 and financial bid not be opened.”
TEST REPORTS Certification :- Device should be ‘Type Approved’ as per the System and Procedure of Central Pollution Control Board for Emission Compliance Testing of Retro-fit Emission Control Devices (RECD) For Diesel Power Generating Set Engines, Dated 01/02/2022, wide Pollution Control Series PCLS/12/2021-22 Adhering to this, RECD to be ‘Type Tested’ for an equivalent kVA family as per the System and Procedure from any one of the four Central Pollution Control Board, Govt, of India, recognized/approved test agencies/laboratories as given below: (a) Automotive Research Association of India (ARAI, Pune) (b) International Centre for Automotive Testing (ICAT, Manesar) (c) Indian Institute of Petroleum (IIP, Dehradun) (d) Vehicle Research Development Establishment (VRDE, Ahmednagar): Back Pressure due to the Emission Control retrofit device :- Maximum back pressure exerted by the Emission Control retrofit device at max prescribed load by DG OEM (as per the capacity of the DG set) should be under limit and display panel to be provided for Back pressure and exhaust temperature limit.
General Technical Requirements (GTR) / Commissioning :- a) Emission Control retrofit device shall be complete with safety precautions to ensure no damage should be done to the DG set operations under any circumstances. The Emission Control retrofit device should be closely coupled with the DG exhaust to ensure 100% of the exhaust passes through the Emission Control retrofit device. b) Anti-Vibration mountings shall be provided for complete Emission Control retrofit device in case of flexible coupling with the diesel generator exhaust. c )Emission Control retrofit device should have protection against under voltage, over voltage, under frequency, over frequency, low battery voltage, over current, earth-fault, short circuit, phase sequence change etc. d) The Emission Control retrofit device shall be with corrosion resistive and HR paint. e) Unloading and placement of the Emission Control retrofit device at the time of delivery is in the scope of the contractor. The consignee shall ensure that the site is located along a motorable way. f) The seller shall provide the trial run (Testing) of Emission Control retrofit device. The seller shall conduct trial run of the Emission Control retrofit device with the available electrical load at site. The trial run shall be for TWO hours. The electrical loading shall not be more than the rated capacity of the DG set. g) Exhaust piping, extra civil work, distribution board shall be provided by the seller
Scope of Installation :- a) Installation of Emission Control Retrofit Device when offered by the vendor is inclusive in the scope of supply and shall be done by the seller. The installation work of Emission Control Retrofit Device. b) Construction of suitable earthing station (if applicable) and necessary connections shall be done by the seller. Warranty/Service ;- 12 months Number of preventive maintenance visits offered in a year during warranty period :- 2 visits DELIVERABLES, TIME SCHEDULE Submission of approach of work/ methodology, Drawings and the details of team as per the scope of work :- 30 days Delivery Of Device :- 60 days Installation, Testing Commissioning at site of retrofit emission control device on existing DG sets :- 90 days
Supply and fixing of optipro SMDB 250 Amp , double door 4 way including 01 No 250 Amp 25 KA as incommer, 04 Nos of outgoing MCCBs four way of 125 Amp 16 KA cap and 01 No 250 Amp onload changeover 4 pole accommodate at bottom and having both side double door cable alley units complete all as specified and directed. Makes : Indoasian / Havells or equivalent in approved makes
M/s Bansi Lal (BID ID -3465713)
manoj and company (BID ID -3465497)
JAWAHAR CONSTRUCTION COMPANY (BID ID -3465253)
KAILASH CONSTRUCTION COMPANY (BID ID -3466155)
M/s Syal Construction Co. (BID ID -3465383)
M/S Pee Kay Builders (BID ID -3465093)
Kissan contractor and engg works (BID ID -3464938)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
Tender60.pdf
Tender Documents • 1.46 MB
BOQ_818729.xls
BOQ • 0.69 MB
Download all tender documents and submit your bid