REPAIRS/REPLACEMENT OF INTERNAL ELECTRIFICATION AND ITS CONNECTED WORKS AT AOC RECORD, AOC CENTRE, 125 TA BN, 454 FD HOSP UNDER AGE E/M (SOUTH) OF GE (SOUTH) SCUNDERABAD

Amount

Taking down existing unserviceable point wiring of any type/ size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings/ bell/ holder etc and removal of unserviceable material out of site area complete all as specified and as directed.

M & L for Point wiring complete with two runs of 1.5 Sq mm copper conductor (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade confirming to IS- 694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches,sockets,fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw ,cup washer etc. complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch. Note1: The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. 2: The cost of cutting of chases of required width and depth for conduit incl plastering , painting/whitewash two coats to match the existing wall colour is deemed to be included in the rate quoted.

All as per Sl item No 2 above but for One ceiling fan/exhaust fan point controlled by one switch through regulator complete all as specified and as directed.

All as per Sl item No 2 above but for One light point controlled by two way switch complete all as specified and as directed.

All as per Sl item No 2 above, but for One 5 Amps socket outlet point on the same board complete all as specified and as directed.

All as per Sl item No 2 above, but for One 5 Amps socket outlet point on the independent board complete all as specified and as directed.

All as per Sl item No 4 above, but point wiring for 3pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 Sqmm with 2.5 sqmm PVC copper conductor as earth wire connected to earth dolly and including PVC casing/caping with sunk cast iron complete all as directed and specified.

M & L for Point wiring complete with two runs of 1.5 Sq mm copper conductor (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade confirming to IS- 694 drawn through and including new non metallic rigid PVC conduit medium grade , ISI marked , 20 mm bore with conduit accessories surface mount on wall or fixed on ceiling/roof/ truss/ columns etc,including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the modular switches, sockets, fan regulators etc and covered with 3mm thick steel plates complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch. Note1: The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. 2: The cost of cutting of chases of required width and depth for conduit incl plastering , painting/whitewash two coats to match the existing wall colour is deemed to be included in the rate quoted.

All as per Sl item No 8 here in before, but for One light point controlled by two 2 way switch 5 amps, SP complete all as specified and as directed.

All as per Sl item No. 8 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.

All as per Sl item No. 8 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per Sl item No. 8 here in before, but for One Bell point controlled by one, one way switch 5 amps, SP complete all as specified and as directed.

All as per Sl item No 8 above, but point wiring for 3pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 Sqmm with 2.5 sqmm PVC copper conductor as earth wire connected to earth dolly and including new non metallic rigid PVC conduit medium grade , ISI marked , 20 mm bore with conduit accessories with sunk cast iron box complete all as directed and specified.

M & L for Point wiring complete with two runs of 1.5 Sq mm copper conductor (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLSH cable of 1100V grade confirming to IS- 694 drawn through and including new PVC casing caping , ISI marked , including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches,sockets,fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw ,cup washer etc. complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch complete all as specified and as directed. Note: The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth

All as per Sl item No 14 above, but point wiring for 3pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 Sqmm with 2.5 sqmm PVC copper conductor as earth wire connected to earth dolly and including new PVC casing capping, ISI marked , 20/25 mm bore with conduit accessories with sunk cast iron box complete all as directed and specified.

All as per Sl item No.14 here in before, but for One light point controlled by two 2 - w a y s w i t c h 5 amps, SP complete all as directed and specified.

All as per Sl item No. 14 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per Sl item No.14 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

All as per Sl item No.14 here in before, but for One Bell point controlled by one, bell push complete all as directed and specified.

S & F switch piano single pole flush type 5 amps, 230 volts complete all as directed and specified.

S & F switch piano single pole flush type 15 amps, 230 volts complete all as directed and specified.

S & F single pole Modular switch 1 way 6 Amps, 1 Module complete all as directed and specified.

S & F single pole Modular switch 1 way 16 Amps, 1 Module complete all as directed and specified.

S & F Switch piano two way flush type 5 Amps capacity 230 volts complete all as directed and specified.

S & F Modular switch 2 way 6 Amps, 1 Module complete all as directed and specified.

S&F bell push 5 A flush type complete all as directed and specified.

S&F Modular Bell Push 6A, 1 Module complete all as directed and specified.

Supply and fix socket outlet modular type multipurpose 2/3 Pin, 6 amps, 230 volts combined 2 Module complete all as directed and specified.

Supply and fix socket outlet modular type multipurpose 3/5 Pin, 6/16 amps, 230 volts combined 2 Module complete all as directed and specified.

Supply and fix socket outlet flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts complete all as directed and specified.

Supply and fix socket outlet flush type multipurpose 2 in 1, 3 Pin, 5/15 amps, 230 volts complete all as directed and specified.

S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as directed and specified.

S & F switch socket combination 5 in 1 multipurpose 3/5 pin 5/15 amps flush typewith complete all as directed and specified.

S & F Modular ceiling fan regulator stepped socket size (modular) suitable to work on 230 volts 2 Module complete all as directed and specified

S & F electronic type regulator single module stepped heavy duty for ceiling fan suitable to work on 230 volts complete all as directed and specified

S & F electronic type regulator two module stepped heavy duty for ceiling fan suitable to work on 230 volts complete all as specified.

S&F bell (buzzer/ding dong) working on 230 volts AC Supply complete all as directed and specified

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as directed and specified

S&F decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly energy efficient ready to use pack 9Watts LED 6000K with connection 3 core copper wire from ceiling rose to fitting with complete accessories complete all as directed and specified Make : Havells/ Bajaj/CG

S&F decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly energy efficient ready to use pack 18Watts LED 6000K with connection 3 core copper wire from ceiling rose to fitting with complete accessories complete all as directed and specified Make : Havells/ Bajaj/CG

S & F 4 ft box type tube light fitting with LED Tube rod of 18/22 watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified and as directed.

Supply and Fix 4ft LED tube rods of 18/20/22 Watt complete all as specified and as directed

S&F in replacement of LED light fitting 35Watts security light including connection of 3core copper wire complete with necessary fixing arrangements such as GI braket of suitable length,nut,bolt,washers etc complete all as directed and specified

M & L for bracket made out of GI pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete including taking down complete all as directed and specified

S & F 15 Watt recess mounted circular downlight with white powder coated polycarbonate housing and pressure diacast , heat sink having high efficiency all as specified and as directed .

S & F 15 Watt surface mounted circular downlight with white powder coated polycarbonate housing and pressure diacast , heat sink having high efficiency complete all as directed and specified

S & F 24 watt recess softline luminaire (1x1) suitable for armstrong/grid ceiling with high brightness white LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal complete all as specified and as directed .

S&F in replacement of LED 36watts recessed 2x2 luminaire White/Warm White to enhance the delight of occupants with comfortable experence through its design & glare free soft illumination and connection of 3 core copper wire with all accessories complete all as directed and specified Make : Bajaj /Havells/CG

S&F in replacement of LED 36watts surface mounted 2x2 luminaire White/Warm White to enhance the delight of occupants with comfortable experence through its design & glare free soft illumination and connection of 3 core copper wire with all accessories complete all as directed and specified Make : Bajaj /Havells/CG

S & F 10 watt bulk head luminaire suitable for outdoor with high brightness giving glare free light complete all as specified and all as directed.

S&F in replacement of MCB SP 6 to 32 Amps 'C' series complete all as directed and specified

S&F in replacement of MCB SPN 16-32 Amps 'C' seriescomplete all as directed and specified. Make : Havells/ABB/ C&S

S&F in replacement of MCB SPN 40-63 Amps 'C' series complete all as directed and specified Make : Havells/ABB/ C&S

S&F in replacement of MCB TPN 63 Amps 'C' series complete all specified and as directed Make : Havells/ABB/ C&S

S&F in replacement of MCB TPN 100 Amps 'C' series complete all specified and as directed. Make : Havells/ABB/ C&S

S&F in replacement of MCB DB SPN 4Way double door 240Volt 50Hz with complete accessories complete all as directed and specified

S&F in replacement of MCB DB SPN 8Way double door 240Volt 50Hz with complete accessories complete all as directed and specified

S&F in replacement of MCB DB SPN Regal Gray 12Way double door 240Volt 50Hz with complete accessories. Make : Havells / ABB/Schenider

S & F in replacement of TPN DB 4 way double door made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as specified and as directed.

S & F Vertical loadline type TPN DB 4 way double door with incoming as MCCB TP 415 volts AC 3 phase 50 Hz with fixed magnetic setting for current rating of 63 Amps 16 KA ,4P made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 160 A complete all as specified and as directed .

S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed.

S&F MCCBs 415V,25KA, 100 amps 4 Pole suitable for DB including removing the existing unserviceable one all as specified and as directed.

All as per Sl item No 62 here in before, but 63 Amps, 10 KA complete all as specified and as directed.

M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed. Note : Two runs of cable ,one run of earth wire cable and one run of PVC conduit will be measured as one unit length.

All as per Sl item No 64, but 2 runs of single core 6 sqmm and one run of single core 6 sqmm as earth continuty conductor complete all as directed and specified Note : Two runs of cable ,one run of earth wire cable and one run of PVC conduit will be measured as one unit length.

M & L Submain wiring with 4 runs of single core 6 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 6 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed. Note : Four runs of cable ,one run of earth wire and one run of PVC conduit will be measured as one unit length.

All as per item no 66 but size 10 Sqmm along with two run of 10 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire complete all as specified and directed.

All as per item no 66 but size 16 Sqmm along with two run of 16 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire complete all as specified and directed.

M & L submain wiring / point wiring with 2 runs of single core 1.5 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through in existing PVC conduit and conduit accessories including one run of single core 1.5 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed. Note: Two runs of cable ,one run of earth wire will be measured as one unit length.

All as per item No.69 above but of 2 runs of single core 2.5 sqmm and one run of single core 2.5 sqmm as earth continuty conductor complete all as directed and specified.

All as per item No.69 above but of 2 runs of single core 4.0 sqmm and one run of single core 4 sqmm as earth continuty conductor complete all as directed and specified

Supply and replace Electronic Driver for LED Light of 2X2 fitting of any capacity/Watt as per site requirement complete all as specified and as directed.

Supply and replacement of Geyser element 2000 watts /1500watts of any type or as per site requirement complete all as directed and specified

Supply and replacement of Thermostat suitable for existing geysers of any make and any type complete all as directed and specified

Supply and replacement of Indicator bulb 230 V suitable for any make and colour all as directed.

Supply and replacement of PVC Cold/Hot water connection pipe 45 cms long 15 mm dia complete all as directed and specified

S &F Bib taps chromium plated with crutch or butter fly handle 15 mm dia screwed for iron pipe or for brass ferrule and fixed including cutting of GI pipe complete all as directed and specified

M & L Rewinding of burnt ceiling fan of 1200 mm sweep motor with super enameled copper wire of suitable size including repainting it in white colour incl transportation complete all as specified and directed Note: Bearing,shaft,capacitor,lock pins,clamps,rubber bushes etc will be measured and paid under respective item of the schedule.

M & L Rewinding of burnt Exhaust fan of 225 / 300mm sweep motor with supper enameled copper wire of suitable size including repaintingas per site requirement, replacement of sealed bearing and shaft of any make, type, model incl transportation complete all as specified and as directed

All as per Sl item No. 79 here in before, but for 450mm sweep exhaust fan complete all as directed and as specified

Supply and replace Fan condenser 2.5 mfd complete all as directed and as specified

Supply and replacement of sealed bearing and shaft suitable for 1200 mm ceiling fan complete all as specified and as directed

Supply and replace fan condenser of 4.00 Mfd complete all as specified and as directed

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as directed and as specified

Supply and replace PVC box (Gang box) with 5 Amps switch socket complete all as specified and as directed

Supply and replace PVC box (Gang box) with 5/15 Amps switch socket complete all as specified and as directed

Supply and fix/lay GI pipe 15 mm dia light grade for protection of earth continuity conductor complete all as specified and as directed

Supply and replace Plug top 5 Amps 3 pin 250 Volts complete all as specified and as directed

Supply and replace Plug top 15 Amps 3 pin 250 Volts complete all as specified and as directed

S & F LED bulb 9 Watt /11 Watt lamp suitable for B22 base complete all as specified and as directed.

S & F of 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 4 Core 10 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular as per site requirement all complete as specified and as directed

M&L for checking and measuring of earthing resistance value of building indicated by removing and isolating earth conductor from test terminal block and measure the earth resistance using digital ohm meter (Earth resistance tester) and note down the readings and refixing all earthing items in original position, obtain the signatures of authority concerned complete all as directed by Engineer in charge. Note1: Testing to be done by qualified technician/electrician in the presence of MES authorities . 2: Contractor should arrange labour & testing equipment along with necessary connecting copper wires , earth rods all misc items required for satisfactory completion of job and is deemed to be included in the rate quoted

Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion all as specified (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate).

M & L for replacement of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire complete all as specified and as directed

Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with copper earth plate electrode 60cmx60cmx3 mm thick electrode buried directly in ground earth pit not less than 2.25 m deep below normal ground level) with top edge of earth plate not less than 1.5 m below ground level connected to copper earth strip 20x3 mm by means of bolts, nuts, check nuts and washers etc of copper and earth lead protected by provision of GI pipe 40 mm bore of medium grade from earth electrode to test point incl provn of concrete pit in PCC(1:2:4) type B-1 using 20 mm graded stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (Weight not less than 4 Kg/Sqm) PCC cover with handle and with 6 mm dia MS bar handle made to shape, GI pipe medium grade 20 mm bore pipe for watering perforated at bottom1.75 mtr long placed on top edge of earth plate, common salt (100 KG) and charcoal(100 KG) and BFC(100KG) compound filling with alternate layers test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50 mtr, all as per Electricalplate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. (Note1: copper earth strip and protection pipe 40 mm bore GI light grade beyond 7.5 mtr will be measured and paid seperately under the respective item of the schedule 2: Testing of earth resistance done by the qualified technician/electrician at his own arrangements and maximum acceptable earth resistance should be less than 5 Ohm . 3: Test Terminal block ,Copper strip 20 x 3 & GI pipe 40 mm up to 7.5 Mtr are included in the rate quoted by the contractor.

Supply and fix in replacement of copper strip Copper strip 20 x 3 mm with saddles and fixing screws etc for roof conductors and down conductors above ground complete all as specified and as directed.

Supply and fix in replacement of Copper strip 32 x 6mm buried in ground as continue earth lead from copper earth plate to test terminal point for complete all as directed and specified.

Supply and lay in replacement of 'Medium grade',galvanised steel tube of dia 40 mm ,on roof for fixing of lightening arrester including taking down with necessary fixing arragements using PCC all as specified and as directed

S & F twin core flexible twisted copper conductor wire 1.1 KV for Phase(Red) and neutral(Black) for connecting light/ switch /socket etc. as per site requirement including taking down old unserviceable one compelte all as specified and as directed

SRI SAI RAM ENTERPRISES (BID ID -3080764)

Charan sales and Service (BID ID -3081477)

M Shyam Sunder (BID ID -3080449)