PROVN OF ARBORICULTURE FOR DEFI TRG AND SINGLE LIVING ACCN AND 36 NOS OF NON MES CIV MD ACCN AT CME PUNE

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting ou in hard dense soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Surface excavation in hard/ dense soil n.exc 30cm deep and averaging 15cm deep and getting out.

Hedges : Digging a trenches by 45cm x 45cm and removal of Morrum, debris, weed Roots etc, to a distance exc 50 M and not exc 250 M and provision of anti-termita (Neem cake, Mithali parathion etc) treatment, filling with Agriculture soil & cattle manure in 8:1 ratio, supply and planting of (Golden Duranta, Koynal) healthy, grownup saplings with good root system.

Bottle Palm / Amaltas / Gulmohar : Digging of pits by 60x60x30 cm (Minimum depth) and removal of Morrum, debris, weed Roots etc, to a distance exc 50 M and not exc 250 M and provision of anti-termita treatment, filling with Agriculture soil & cattle manure in 8:1 ratio, supply and planting of Bottle Palm / Amaltas / Gulmohar of minimum 3' height with good root system complete all as specified and directed by Engr-in-Charge

Providing of uPVC pipes of SCH 40 standard manufactured as per (ASTM 1785) inclcuding fittings & Accessories like tees, elbows, bends, junctions, Reducers glue etc; as required for laying and jointing of pipe in place.

uPVC pipe Sch 40 50mm bore

uPVC pipe Sch 40 40mm bore

Providing & fixing of Pop-up ROTOR sprinkler 9 - 12 mtr radius rotor with automatic arc return and non strippable drive part and full circle in one model ,flow 1.2 to 53.8lpm - with CV - etc. item complete. (Make : K-Rain/ Hunter or equivalent)

Providing & Fixing of SJ- 712, 3/4" Pop up Connecting Four Elbow Swing joint Assembly. The fittings shall be made of UV resistant thermo plastic etc. item complete. (Make : Harit or equivalent)

Providing and fixing of uPVC reducing tee of varying size 3/4" item complete

Providing, fixing, testing, commisioing of PVC Ball Valve 63 MM (Isolation Valve) valves of suitable size as per specifications including the cost of all fittings & accessories complete. (Make : Finolex Plasson / Jain Harit or equivalent)

Providing, fixing, testing, commisioing of PVC Flush valves of suitable size as per specifications including the cost of all fittings & accessories complete

Providing & fixing of 1" Air release valve, The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressureshall be 5 bar. Including service saddle and riser assembly. (Make : Harit or equivalent)

Providing & fixing of Brass Quick coupling valve 3/4" made up of solid brass with locking cover corrosion resistant and stainless steel spring. Including service saddle and riser assembly. etc. item complete. (Make : Harit or equivalent)

Providing & fixing of Brass Key threads into top of QCV to provide water access And Brass Swivel Elbow. etc. item complete. (Make : Harit or equivalent)

Providing & fixing of 10"Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout. etc. item complete. (Make : Hunter /Rainbird or equivalent)

Providing & fixing of 6"Round box with greenlid andcorrugated structure with unique shovel access slot and bolt hole knockout. etc. item complete. (Make : Hunter /Rainbird or equivalent)

Providing & Fixing screen filter 2" with capacity matching pump design flow having an suitable inlet connections. (Make : Finolex or equivalent)

Providing & Fixing of Openwell submersible / Monoblock pumpset of 2 HP with controller. item complete. (Make : Deccan /Kirloskar/Laxmi or equivalent)

Providing & fixing of submerssible flat cable 2.5 sq mm 3 core.

Providing & Fixing of Suction ,Delivery Pipe with common header assembly etc. item complete.

Providing & fixing of Butterfly Valve in mainline for bypass and flow diversion of approved quality 2.0" size with necessary fittings & accessories etc. complete. (Make : Normex /Kartar or equivalent)

Providing & fixing of Non Return Valve 2"to prevent back flow 3.0" size with necessary fittings & accessories etc complete.(Make : Audco /Normex/Kartar or equivalent)

Providing and fixing of PRV 2" etc. with necessary fittings & accessories etc complete. (Make : Harit or equivalent)

Supply and fixing of Automation cable for two way communication between decoder controller and decoders, Along with conduit pipe . Etc Item complete. (Make : Polycab or equivalent)

Supply and fixing of Automation controller , outdoor mount with 230/240 VAC internal transformer decoder control system ,(Make : K-rain/Hunter/ Rainbird or equivalent)

Supply and fixing of 2" Solenoid Valves with fabric reinforced diaphram and rugged PVC construction,compatible with and slow closing to prevent water hammer,pressure rating upto 10 bar with 24AC solenoid, with provision to attach Pressure Regulator. etc. item complete. (Make : K-rain/Hunter/ Rainbird or equivalent)

Providing & fixing of 10"Round box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout. etc. item complete. (Make : Hunter/ Rainbird or equivalent)

Supply and fixing of direct bury -on wire connector with strain relief , with waterproof silicon sealant.etc. item complete.(Make : Hunter/ Rainbird or equivalent)

Supply and fixing of Voltage Stabilizer with related accessories etc. item complete.

Supply and fixing of Pump Relay .etc. item complete.

M&L for pre-cast cement concrete block masonry 1:3:6 type C-1 using 20mm graded aggregatesetting in CM 1:6 with solid blocks, exc. 10 cm in width including dismantling of old brick/block, complete all as specified and as directed.

M&L PCC 1:3:6 type C2 (using 40 mm graded agg) in foundation filling and mass concrete

M&L for 15mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed.

Mild steel 8mm dia deformed or twisted bar, cut to length bent to shape required including cranking bending and binding with and including mild steel wire (annealed ) not less than 0.9mm dia

M&L RCC 1:2:4 type B1 (20mm graded aggregate) as in precast cover slab for manholes septic tank cover etc including necessary form works and set in CM 1:6 complete all as directed by engr-in-charge

M&L RCC Slabs supported on walls,beam and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like , type B-1 1:2:4 (20mm graded )

M&L Form work to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200 mm thick on rough finished surface

S&F MS Tree Guard of 450mm dia with 3 Nos angle and welded wiremesh of 3mm dia, ht and size of tree guard all as specified and directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard dene soil.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and ridges, fixed with self tapping screws complete as specified.

M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and ridges, fixed with self tapping screws complete as specified.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 as in Columns, purlins and rafters etc.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for precast inerlocking paver blocks glossy finish with any shape and size conforming to 15658-2006, 60mm thick M-35 grade with grey cement and pigment laid over & including 75mm thick stone dust / grit cushioning complete all as specified and as directed

M&L for 100mm plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

M&L for cement concrete type B1 1:2:4 (using 20 mm gradded aggregate), in coping, edging etc complete all as specified and directed.

Santosh Pandurang Pise (BID ID -3491630)