Purchase of Lab Equipments for EEE Dept

PLC Interfacing kit for Interfacing of Discrete Field Devices with PLC Interface Contains: - PLC Input Interfacing Push Button, Limit Switch, Reed Switch, 3 wire Inductive Proximity Sensor suitable to operate with 24 V supply - PLC Output Interfacing Buzzer, pilot lamp - Closed Wooden cabinet .

PLC interfacing kit for Forward and Reverse Control suitable for 5 HP, 3 Phase Induction Motor Interface Contains: - 2 nos. of 3 phase 16A Main Contactors - 3 phase input, Fuses - Stop, Start Fwd, Jog Fwd, Start Rev, Jog Rev Push Switches - Inputs for PLC, Control from outputs of PLC - Proper termination for 5 HP cage motor - Wooden closed cabinet

PLC Based Water Level Control System Interface kit Interface Contains: - Level sensors as input to the PLC - Water tap as output from the PLC - Water Pump motor control using outputs of the PLC - Water Tank with sump and Overhead tank model - 2 Levels sensor switches and 12 V Pump - 24 V Solenoid valve to drain water, - Foot valve arrangement to take the water from the sump - 12 V and 24V Power Supply

PLC Based Car Parking Control System Interface kit Interface Contains: - PLC Input Interfacing One opto interrupter sensor Entry Gate and another one opto interrupter sensor Exit Gate - PLC Input Interfacing 2 Nos of Limit switch - PLC output Interfacing 2 Nos of 24 V Pilot Lamp, one for available and another one is full - PLC output Interfacing Barrier gate of incoming and outgoing vehicle control with 2 Nos of DC Motor - Wooden closed cabinet

PLC Based Fan Control for Energy Conservation kit Interface Contains: - PLC Input Interfacing 2 nos of Photo Electric Proximity sensors Entry Hall and another one Photo Electric Proximity sensors Exit Hall - PLC Output Interfacing 4 Nos of 24V DC Fan - Wooden closed cabinet

PLC Based Three Floor Lift Control System kit Interface Contains: - 3 floors (Ground plus two floors) sheet metal model - Floor request switches and Floor sensing switches 6 inputs to PLC - Cabin – stepper motor with controller/geared DC motor with forward and reverse control - Proper termination to wire inputs and outputs to PLC

PLC Based Illumination Control System Interface Contains: - PLC Input Interfacing One Potentiometer to use percentage reading - PLC Input Interfacing One LDR to use Illumination view - PLC Output Interfacing 3 Nos of LED Light setup -- Wooden closed cabinet