Repair renovation to various residential buildings under division No III Shimla. SH Painting and distempering , repair of cupboards, brick work, plastering, wood work, steel work and other minor repair in various residential building in Benmore sect

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in -charge Nominal concrete 1:3:6 or leaner mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres leadcomplete including carriage of materials within all leads and lifts.For thickness of tiles 10 mm to 25 mm

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. including carriage of materials within all leads and lifts

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them including carriage of materials within all leads and lifts

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) complete including carriage of materials in all leads and lifts

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete including carriage of materials in all leads and lifts

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) complete inclding carriage of materials in all leads and lifts

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position 2nd class deodar wood complete including carriage of materials in all leads and lifts

Providing wood work in frames of false ceiling, partition etc. sawn and and putup in position including carriage of materials within all leads and lifts. Rai wood/Chill wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) Deodar wood wood 40 mm thick shutters

Providing and fixing wire gauge shutters using galvanised M.S. wire guage of IS. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey wondows including bright finished black namelled iron hinges with necessary screws etc. complete including carrage of material within all leads and lifts. 40 mm thick in 2nd class deodar wood

Providing and fixing 9mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) including carriage of materials within all leads and lifts

Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts

Providing and fixing 12mm thick shuttering ply/ water proof ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately)

Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts.

Providing and fixing 19mm thick Commercial Board shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts

Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts.

Providing and fixing hard wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts

Providing and fixing hard wood plain square edged cover fillets (beading) 40mmx12mm section with wood screws in ceiling and lining including mitring at junctions including carriage of materials in all leads and lifts

Providing and fixing aluminium Sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16mm

Providing and fixing aluminium tower bolts (barrel type) with necessary screws etc. complete : including carriage of materials within all leads and lifts.(i) 250x10mm

Providing and fixing aluminium handles, ISI marked,or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts. 150mm

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts.

Providing and Fixing1.50 mm thick pvc/rubber tiles flooring plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately)for payment including carriage of materials within all leads and lifts

Providing and fixing Hand wooven flooring covering to floor having pile height 5.5mm and weight 1450-1550 grm per sqm. Plain or coloured laid with an approved adhesive on sub floor including cutting and fixing complete to sub floor including damp proofing treatment (damp proofing treatment to be measured separately for payment) as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts

Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 85g with wire of dia 0.56 mm to windows and clerestory windows including required beading complete including carriage of materials within all leads and lifts

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of materials within all leads and lifts:-Plain Glass:4mm thick

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing 0.63 mm thick PGI sheet ceiling/lining of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying marble work (Table rubbed and polished) in flooring 20mm. thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2(1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble. 20 mm thick Baroda green marble including carriage of materials within all leads and lifts

Providing round/half round moulding/nosing over edge of marble/granite work or kota stone etc. duly polished in mirror finish as per the direction of Engineer-in-Charge complete including carriage of materials within all leads and lifts

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than. including carriage of materials within all leads and lifts

Providing ridges or hips 60 cm over all in plain G.I.sheet with galvanised iron J or L hooks. bolts and nuts 8mm dia G.I. Limpet and bitumen washers copmlete 0.63 mm thick

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350 gm/m². including carriage of materials within all leads and lifts

Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.cluding carriage of material within all leads and lifts as per direction of Engineer-in-charge. 0.63 mm thick with zinc coating not less than 275 gm/m²

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth In Cement Mortar 1:6 (1Cement:6 Sand).including carriage of materials within all leads and lifts

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade one or more coats on old work complete including carriage of materials within all leads and lifts

Finishing walls with Acrylic Smooth (Apex Ultima) exterior paint of required shade : Old work (One or more coat applied complete including priming coat of exterior primer applied inlcuding carriage of materials in all leads and lifts

Providing and applying white wood based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts

Painting Steel work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts

Painting wood work with Deluxe Multi Surface Paint of required shade One or more coat applied of approved brand and manufacture complete including carriage of materials in all leads and lifts

Painting on G.S. sheet (New work two or more coats) with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade complete including carriage of materials in all leads and lifts

Painting on G.S. sheet (Old work one or more coats) with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade applied on old work complete including carriage of materials in all leads and lifts

Providing and fixing powder coated curtain rod with brackets and required number of curtain rings with screws etc. complete including carriage of material within all leads and lifts and as per the direction of the Engineer-in-Charge

Providing and fixing wall ceiling floor CPVC pipe (heavy duty) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials within all leads and lifts :- a) 15mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - 15mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15mm nominal bore

Providing and fixing G.I. Socket 15mm dia of approved brand including carriage of materials within all lead and lifts

Providing and fixing G.I. Tee 25mmx20mm of approved brand including carriage of materials within all lead and lifts

Providing and fixing high pressure PVC Finolex (Type-B) spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials within all leads and lifts 110mm

Providing and fixing high pressure PVC Finolex (Type-B) Door bend ISI marked including fixing with approved adhesive etc complete including carriage of materials within all leads and lifts. 110mm

Providing and fixing PVC finolex (Type-B) Plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts 110mm

Providing and fixing PVC finolex (Type-B) Collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. 110mm

Providing and fixing vitreous china Orissa pan wash down, water closet squatting pan (Indian type W.C. Pan) size 580mm (Earth work, bed concrete, and trap to be measured and paid for separately) including carriage of material within all leads and lifts and as per the direction of the Engineer-in-Charge

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. including carriage of materials within all leads and lifts

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers including carriage of materials within all leads and lifts :-Solid Type :-White plastic seat and cover

Providing and fixing 550mmx400mm flat back vitreous China wash basin with pedestal and brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials within all leads and lifts

Providing and fixing stainless steel kitchen sink 610mm X 510mm with bowl depth 200mm size with drainage board of approved make with C. I. or M. S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts

Providing & fixing 32mm dia, PVC waste pipe for wash basin or sink including carriage of materials within all leads and lifts

Providing and fixing 45cm length UPVC connection pipe with brass unions 15 mm nominal bore complete including carriage of materials within all leads and lifts.

Providing and fixing Wall mixer telephonic arrangement including connection fitting complete in all respect of make complete including carriage of materials within all leads and lifts

Providing and fixing Kitchen sink mixture including carriage of materials within all leads and lifts complete including carriage of materials within all leads and lifts

Providing and fixing single hole basin mixer with with top / bottom swinging spout of approved quality including carriage of materials within all leads and lifts

Providing and fixing 15mm hand shower with angular and rest holder including carriage of materials within all leads and lifts

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts

Providing and fixing CP Brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.645 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.including carriage of materials within all leads and lifts

Providing and fixing CP Brass towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials within all leads and lifts

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of materials within all leads and lifts

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including carriage of materials within all leads and lifts

Providing and fixing toilet paper holder C.P. brass complete. including carriage of materials within all leads and lifts

Providing and fixing charomium plated soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts

Providing and fixing 3 in 1 angular corner acraylic glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden/rawl plugs with C.P. brass screws etc. complete including carriage of materials within all leads and lifts

Providing and fixing 15 mm C.P brass pillar tap with capstan head Long body including carriage of materials within all leads and lifts.

Providing and fixing 15mm dia C.P.brass Angle cock of approved quality including carriage of materials within all leads and lifts.

Providing and fixing 15mm dia C.P.brass Bib cock of approved quality including carriage of materials within all leads and lifts.

Providing and fixing 12mm thick imported pine wood ceiling/paneling with tongued and grooved jointing of standard quality ISI mark and approved shade and colour complete including carriage of material within all leads and lifts as per direction of Engineer-in-Charge

Providing and fixing PVC ceiling/paneling with tongued and grooved jointing of standard quality and approved shade and colour complete including carriage of material within all leads and lifts as per direction of Engineer-in-Charge

Providing and fixing plain polycarbonated transparent sheet 1.20 mm thick in with galvanised Jor l hooks bolts and nuts with G.I. limpet and bitumen rubber washer complete with all accessories asrequired in all leads and lifts as per direction of Engineer-in-charge

Melamine polishing on wood work (one or more coat) applied on new work complete including carrriage of materials in all leads and lifts

Providing and Fixing non wooven (Vellore) or equivalent carpet 3.15mm thick of approved colour and shade of superior quality complete in all respects as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts

Providing and placing on terrace (at all floor levels) 1000 litre polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto all floor level including carriage of materials within all leads and lifts

Providing and fixing ACP sheet 3mm thick in linning/ceiling/walls, doors/panelling fixed with self drilling screws etc. complete by the Engineer-in-Charge including carriage of materials within all leads and lifts.

Disposal of building rubbish/ malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mm initial lead, for all leads including all lifts involved.

Please Enable Macros to View BoQ information