Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹49.9 L+₹28,824 (0.58%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹50.4 L+₹75,258.48 (1.52%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹50.7 L+₹1.1 L (2.13%)Rejected-AOC | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹50.8 L+₹1.2 L (2.40%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR MAINT OF BR AND EM ITEMS INCL PERIODICAL SERVICES TO JCO OR MD ACCN AT UMED VIHAR AND IMLI AKUM VIHAR AT RMS UNDER AGE BR II
2023_MES_597851_1
8544/C/E8
Open Tender
Civil Works
Item Rate
270 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹98,000
21 Jun 2023
24 May 2023
21 Jun 2023
24 May 2023
19 Jun 2023
6 Jun 2023
24 May 2023 - 30 May 2023
Amount
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level etc complete all as specified and as directed.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.
Demolition of laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.
Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter not exceeding 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each etc complete all as specified and as directed.
Taking down shutters of any description not exceeding 1 Sqm each etc complete all as specified and as directed.
Taking down shutters of any description exceeding 1 Sqm each but not exc 2.00 Sqm etc complete all as specified and as directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping etc complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry laid over and including 15mm thick screed bed in CM 1:6 and pointed in white/coloured cement to match the shade of tiles etc complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick exc 0.11 Sqm but n exc 0.18 Sqm set and jointed in neat cement slurry laid over and including 15mm thick screed bed of CM 1:6 and pointed in white/coloured cement to match to match the shade of tiles etc complete all as specified and as directed.
All as per item No 11 here-in-before but in skirting excluding screed bed etc complete all as specified and as directed.
M&L for ceramic coloured printed tiles of size 300x200mmx7 mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in white/ coloured etc complete all as specified and as directed.
M&L for non - skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry laid over and including 15mm thick screed bed of CM 1:6 and pointed in white/coloured cement to match to match the shade of tiles etc complete all as specified and as directed.
All as per item No 14 here-in-before but in skirting excluding screed bed etc complete all as specified and as directed.
M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces to received vertical tiles complete all as specified and directed.
M&L for 40 mm thick PCC (1:2:4) type B-1 using 20mm graded stone agg as in leveling course complete all as specified and directed.
M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M & L for PCC (1:3:6) type C-2 using 20mm graded aggregate as in coping including necessary form work etc complete all as specified and as directed.
Demolition of brick work including all quoins arches pillars etc built in cement mortar etc complete all as specified and as directed.
M&L for brick work in cement mortar (1:4) with sub class 'B' bricks using old size bricks straight or curved on plan exc 6.0 m mean raidus etc complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan in any radius in half brick thick walls built in cement mortar 1:4, etc complete all as specified and as directed.
Taking down cement plaster on walls built in cement mortar etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for 15mm thick cement plastering in cement mortar 1:6 on brick or concrete surfaces of wall surface finished fair and even complete all as specified and directed.
M&L for 15mm thick cement plastering in cement mortar 1:4 on brick or concrete surface of wall finished fair and even with out using extra cement complete all as specified and directed.
M&L for 5mm thick cement plastering in cement mortar 1:3 on ceiling surface finished fair and even,complete all as specified and directed.
M&L for Pressed steel frames 1.25 mm thick MS sheet of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,including one shop coat of primer complete as specified, supplied and fixed etc complete all as specified and as directed.
S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and directed.
S&F for second class hardwood 35 mm thick factory made plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or timber flat, size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated etc complete all as specified and as directed.
S&F for second class hardwood glazed and skeleton door shutters, 30mm thick factory made , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc complete all as specified and as directed.
S&F for second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick factory made , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc complete all as specified and as directed.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed.
S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening etc complete all as specified and as directed.
S&F for Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site etc complete all as specified and as directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
All as per item No 35 here-in-before but without glazing bar etc complete all as specified and as directed.
S&F for Chimney bars (straight or camber) bearing bars; tongues or water bars for window frames, window guard bars, plain, let in and fixed independently in wooden frames L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and as directed.
Hacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty and providing and fixing new ones etc complete all as specified and as directed.
S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and as directed.
S&F in repairs Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and as directed.
S&F for mild steel conforming to Fe 410-0 or Fe 310-0 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; hand made sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles etc complete all as specified and as directed.
S&F Butt hinges, medium weight, cold rolled mild steel, 75mm size etc complete all as specified and as directed.
S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size etc complete all as specified and as directed.
S&F Aluminium, anodised, barrel tower bolt 200mm long of extruded section and fixed etc complete all as specified and as directed.
S&F Aluminium, anodised, barrel tower bolt 150mm long of extruded section and fixed etc complete all as specified and as directed.
S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed etc complete all as specified and as directed.
S&F Extruded aluminum alloy handles, fabricated type, anodised 100 mm size etc complete all as specified and as directed.
S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size etc complete all as specified and as directed.
M & L for block boards, 18/19 mm thick, , grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work commercial type fixed with screws to timber frame work , for cup board including lipping / beading as required complete all as specified and directed.
S & F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, for cup board including lipping / beading as required complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coat of oil bond distemper over a coat of primer etc complete all as specified and as directed.
S&F in repair floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed.
M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint in any tint complete all as specified & directed.
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed
M&L for two coats of synthetic enamel paint over a coat of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described etc complete all as specified and as directed.
M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.
M&L for Preparation of old decorated surfaces and appplying one coat of white wash on walls, cornices etc. complete all as specified and directed.
All as per item No 58 here-in-before but on ceiling etc complete all as specified and as directed.
Complete removal of exisitng treatment on walls all as specified and as directed.
M&L for 2 mm thick Birla white putty/JK white wall care putty on walls etc complete all as specified and as directed.
M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying two coat of oil bound distemper on walls including complete removal of existing treatment all as specified and directed
M&L preparation of old surfaces of walls applying one coat of cement base paint complete all as specified and as directed.
M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oil bound distemper on walls.all as specified and directed
M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over a coat of primer on old surfaces of walls complete all as specified and directed.
M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L for Preparation of new surfaces and appplying two coats of white wash on ceiling, cornices etc. complete all as specified and directed.
M&L preparation of new surfaces of walls & applying two coats of cement based paint over a coat of primer complete all as specified and directed.
Complete removal of existing treatment on wall/roof projection including facia,cormices etc by scrapping with mechancial sander (having mechincal vaccum mechanism) with sanding pad of approprite grit to make surface clean,free from dust,loose paint etc by skilled labour complete all as specified and directed.
M&L for waterproof cement based putty@ 1Kg (undiluted) per sq mtr of average thickness 1mm over the plastered/old painted wall after scraping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having vacuum mechanism) having RPM not less than 1500,sanding pad of 240 Grit or above to make the surface free from dust etc.by skilled labour as per following steps: Step1) Mix the putty powder by adding water as per manufacture instruction and mix it with putty mixer the mixing capacity of min 2.5 Kg putty per minute. Step2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minuts with a maximumpressure 3300 PSI.Allow6-8 hrs time to dry the putty surface. Step (3(a) The work pertaining to periodical services&water proffing shall be executed from authrized application through manufacture of which the materials i.e. Paint,distemper,putty etc. is proposed to be used by the contractor and approved by Garrisin Engineer. (b) Cost of scafolding upto 10mm hight of bulding is including in this item. (c) The contractor shall upload along with the documents under cover-I,Memorandum of Understanding (MOU) with only one manufacture mentioned in the contract failing which the bid shall be liable to be rejected. (d) Masking of window/doors during spary painting using polythine film will be included. (e) cleaning and clearing site of paint masts etc.included. (f) 05 yers gurtantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 Years.
M&L for one coat acrylic water based exterior grade [email protected] (undiluted)/10sq mtr diluted with fully automatic airless spray machine of paint applaction with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete as as specified as directed.(Note (a) The work pertaining to periodical services&water proffing shall be executed from authorized applicator through manufacture of which the materials i.e Paint,Distemper,Puuty etc. is proposed to be used by the contractor and approved by Garrision Engineer. (b) Cost of scafolding upto 10mm hight of bulding is enclosed in this item. (c) The contractor shall uplode along with the doucuments under cover-I Memorandum of understanding (MOU) with only one manufature menstioned in the contract,failing which the bid shall be liable to be rejected. (d) 05 Years gurtntee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 yeras (Make: Asian,BERGER AND DULEX)
M&L for two coats water based premum acrylic smooth exteriror emulsion of approved colour with silicon additive&colour stay Technology,Excellent Drit Pick up resistence with low VOC less than 50 gram/ltrs as per LEEDS specification.Anti algal properties in two [email protected] ltr (unditluted)/10 sqm diluted with water as per automatic airless spray machine of paint applaction with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete as as specified as directed.(Note (a) The work pertaining to periodical services&water proffing shall be executed from authorized applicator through manufacture of which the materials i.e Paint,Distemper,Puuty etc. is proposed to be used by the contractor and approved by Garrision Engineer. (b) Cost of scafolding upto 10mm hight of bulding is enclosed in this item. (c) The contractor shall uplode along with the doucuments under cover-I Memorandum of understanding (MOU) with only one manufacture menstioned in the contract,failing which the bid shall be liable to be rejected. (d) 05 Years gurtntee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 yeras (Make: Asian,BERGER AND DULEX)
M & L for writing letter for figures (block, Roman, italic or indian) n exc 30 Nos CM high with thick synthetic paint with out bursh marks, if necessary repainted until the desired result is obtained etc complete all as specified and as directed.
S&F in repair 15mm bore long body bib cock chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.
S&F in repair 15mm dia pillar tap cast copper alloy chromium plated fancy type etc complete all as specified and as directed.
S&F in repairs Pillar tap with aerator, cast copper alloy with capstain heads, chromium plated, fancy type, screwed down with high pressure, with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore dia of pipe etc complete all as specified and as directed. Make : Cera Cat No QT F2006101 or equivalent in Hindware/Parryware.
S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes etc complete all as specified and as directed.
S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes etc complete all as specified and as directed.
S&F brass chromium plated angle cock 15mm bore with crutch or butterfly handle screwed to iron pipe, fixed in repair etc complete all as specified and as directed.
S&F in repair CP towel rail 600mm long with brackets, chromium plated 20mm dia in repair etc complete all as specified and as directed.
S&F brass CP shower rose 100mm size with swivel joint fixed in repairs etc complete all as specified and as directed.
S&F in repair PVC low level flushing cistern of 10 ltrs capacity incl flush pipe complete fixed in repairs.
M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed.
S&F in repairs Vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed.
S&F mirror of size 450x600x5mm thick with aluminium frame and mounted on 6mm ply confirming to IS, with two Nos of hanging hooks fixed in repairs etc complete all as specified and as directed.
S&F in repair PVC connection pipe 15mm bore 450mm long etc complete all as specified and as directed.
S&F waste pipe 750 long for WHB or sink in repairs etc complete all as specified and as directed.
S&F in repair vitreous china white wash hand basin flat back size 550x400mm etc complete all as specified and as directed.
S & F in repairs 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair, complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position including taking out water closet Indian type/ EWC and removal of lime concrete bed, 'P' or 'S' trap and cleaning the sunken portion etc complete all as specified and as directed.
M&L Water proofing treatment on RCC roof etc. comprising with the following operations and as specified herein below :- (a) Taking down/scrapping out existing old tarfelt bituminous compound including, sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n.exc. 250m. (b) 15 mm thick plastering in cement mortar 1:4 mixed with WPC @ 3% by weight of cement finished even & smooth and curing for minimum 7 days. (c) Preparing & cleaning of fully dried cement plastered surface (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per Sqm conforming IS-3384 - 1986 (e) A layer of APP based polymeric membrane 3mm thick (minimum), weighing 3.5 kg per Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm )shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm on longitudinal direction.
M&L (a) Top of RCC slab in sunken portion including peripheral beams shall be plastered with 15mm thick cement and sand mortar (1:3) using approved water proofing compound @ rate of 3% by wt of cement and finished even and smooth with out using extra cement and curved adequately and allowed to dry. (b) Two coat of epoxy resin/polymer modified cementaticious coating like brush bond of Fosroc or equivalent both on floor or wall/beam shall be applied as per manufacturer's instruction. (c) Slab to be given 1:20 slope outwards with 25mm GI pipes spout with 300mm projection beyond outer surface of wall. (d) Water tightness by flooding for 72 hours the same shall be filled with lean concrete (1:4:8) type D2 using cinder upto required depth (lean concrete will be measured seperately). Surrounding to WC Pan shall howeverbe of lime concrete as spd and directed. (e) All stages shall be passed by GE personally.
M & L cement concrete type D-2, (1:4:8) using 40mm graded stone aggregate as in fillings for sunken portion and mass concrete etc complete all as specified and as directed.
Demolition and breaking up drain pipes (salt glazed, stoneware, AC or reinforced concrete/PVC pipe) set in cement mortar/concrete 75 /110 mm dia fixed in position etc complete all as specified and as directed.
S&F 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls etc complete all as specified and as directed.
All as per item No 97 here-in-before but bore of pipe 75 mm dia fixed to walls etc complete all as specified and as directed.
S&F(SWR) 110mm bore pipe junction single (single T) equal and unequal with access door in repair etc complete all as specified and as directed.
S&F PVC (SWR) branch piece, double (double Y) equal or unequal 110mm bore in repair etc complete all as specified and as directed.
S & F 110 mm dia PVC (SWR) vent cowl in repair complete all specified and as directed.
Re-fixing only 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls after cleaning the old pipe etc complete all as specified and as directed.
All as per item No 102 here-in-before but for bore of pipe 75 mm dia fixed to walls etc complete all as specified and as directed.
S&F PVC (SWR) bends 110mm bore of any radius with access door in repairs etc complete all as specified and as directed.
S & F stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, as fixed in repairs complete all as specified and directed.
Supply and fixing in repair stainless steel (conforming to AISI-304 grade) plate rack of overall size 750mm x 600mm x 254 mm or equivalent made of 1mm thick stainless steel sheet fixed on CP cantilever brackets, complete all as specified and as directed. Make : Jayna Cat No SBSD-05 or equivalent approved make as approved by GE.
S&F in repairs for Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets , stops, rollers and rings etc complete all as specified and as directed.
M & L for cement concretetype C-2, 1:3:6 (40mm graded stone aggregates) as in surface channels and drains etc complete all as specified and as directed.
M & L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement etc complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping/PVC Conduit pipe medium grade including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.Make:- Richa/Havells/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa
(a) One light/ Bell Point controlled by one way switch etc complete all as specified and as directed.
(b) One Exh/Ceiling fan point controlled by one, one way switch etc complete all as specified and as directed.
(c) One 3 pin socket outlet 5 Amps on the same board with other switches etc complete all as specified and as directed.
(d) One 3 pin socket outlet 5 Amps on the Independent board etc complete all as specified and as directed.
All as per item No-111.0 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 6 Amp etc complete all as specified and as directed.
M&L for Socket outlet, 2 in 1, 3 pin 5A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type etc complete all as specified and as directed.
M&L Switch socket combination 2 in 1, 6A/16A, 5 in 1 flush type etc complete all as specified and as directed.
M&L for Bell push 6A etc complete all as specified and as directed.
M&L for bell AC 230 volts musical type etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.
M&L for 20 Watt LED, 4', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.
M&L for 10 Watt LED, 2', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.
M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting etc complete all as specified and as directed.
M&L for decorative wall light fixture made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old UNSV complete all as specified and directed.
M&L for replacement LED 1x25W Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting complete all as specified and directed.
M&L for sub main wiring Casing caping two run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including casing caping complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of casing caping/PVC conduit pipe and its accessories of suitable size shall be measured as one unit length.
M&L for sub main wiring Casing caping two run 2.5 Sq mm and one run of 2.5 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including casing caping complete all as specified and as directed. NOTE:- Two runs of 2.5 Sq mm +one run of 2.5 Sq mm and one run of casing caping/PVC conduit pipe and its accessories of suitable size shall be measured as one unit length.
M&L for Repair/Replacement for 20 Watt LED, 4', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.
M&L for Repair/Replacement for 10 Watt LED, 2', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed.
M&L for Repair/Replacement for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting.
M&L for Repair/Replacement for decorative wall light fixture made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old UNSV complete all as specified and directed.
M&L for Repair/Replacement for replacement LED 1x25W Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting complete all as specified and directed.
M&L for VTPN 4 way,double door 415 Volts, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs incl taking down of DBs complete all as specified and as directed. Make : Legrand/ABB/Siemens
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.
All as per item No 134.00 above but SPN 4 Way complete all as specified and as directed.
Supply and fixing MCB TPN 63 to 100 Amps 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and Commissioning incl taking down old unsv MCB complete all as specified and as directed.
M&L for in Replacement of MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and as directed.
M&L for MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.
M&L for Repair/Replacement for piano switch single pole 5A, one way complete all as specified and as directed.
M&L for Repair/Replacement for switch socket combination 6 Amps 5 pin , 230 volt flush type complete all as specified and directed.
M&L for Repair/Replacement for switch socket combination 16 Amps 5 pin 230 volt flush type complete all as complete all as specified and directed.
M&L for Repair/Replacement for socket outlet 5 pin 6A, 230 volt flush type complete all as specified and directed.
M&L for Repair/Replacement for fan regulator 100/120 watt step type AC 220 volt complete as complete all as specified and as directed.
M&L for spray painting to existing meter panel board after preparation of old painted surfaces (Inner & outer) with applying 01 coat red oxide 2 coats of synthetic super enamelled paint n.exc complete all as specified and as directed.
M&L for replacement of PVC casting & caping 20 x 12 mm complete all specified and as directed .
M&L for replacement of PVC casting & caping 25 x 12 mm complete all specified and as directed Make : Presto plast/Supreme/Richa complete all specified and as directed .
All as per item No-146.0 here-in-before but but in 32 x 12 mm complete all specified and as directed .
Supply and fixing for PVC switch board 10" x 12" suitable for switch socket complete all as specified and directed. Make : Richa/ ABB/ Presto Plast
Supply and fixing for PVC switch board 8" x 6" suitable for switch socket complete all as specified and directed. Make : Richa/ ABB/ Presto Plast
All as per item No 149.00 PVC switch board 7"x4" . Make : Richa/ ABB/ Presto Plast
All as per item No-149.0 here-in-before but PVC switch board 4" x 4". Make : Richa/ ABB/ Presto Plast
M&L for hylem Sheet 10 x 12 inch switch board sheet complete all as specified and as directed.
All as per item No-153.0 here-in-before but above 8 x 6 inch etc complete all as specified and as directed.
All as per item No-153.0 here-in-before but 7 x 4 inch etc complete all as specified and as directed.
All as per item No-153.0 here-in-before but 4 x 4 inch etc complete all as specified and as directed.
MM Dhar Enterprise
das enterprises
ASHA ENGINEERING ENTERPRISES
Tiyi Enterprises
CHANDRADEO PRASAD
P K ELECTRICAL
M/S Lucky Builders
Rameshwar Prasad
M/S RAHUL TRADING CO.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .