REPAIR, MAINT SUBMERSIBLE PUMPSETS, LT PANEL, WIRELESS WATER LEVEL INDICATOR AND OTHER MISC WORK IN PUMPHOUSE IN DOMESTIC AREA AT AF STATION CHAKERI, KANPUR

Amount

Taking / lifting out defective submersible pumps set from bore well complete with column pipe steel rope, submersible cable and accessories etc and relowering and commissioning the same after repairing works and testing complete for the followoing capacity:- 45/40 HP 3 Phase Note for item No. 1.00 to 4.00:- Replacement of wornout parts / spares with new components spares shall be measured and paid separately under relevant item of schedule 'A'/BOQ as supply only and fixing of the same is deemed to be included under this item.

All as per Sl No 1.00 but 35/30HP 3 phase

All as per Sl No 1.00 but 20/25 HP 3 Phase

All as per Sl No 1.00 but 2/1.5 HP Single Phase

Dismantling , taking out complete burnt copper winding wire of submersible motor, and winding with PVC insulated copper wire of existing gauge as per motor capacity using new insulation material such as insulating paper sleeves etc. Including cleaning of stator slots replacement of defective parts and testing complete, replacement of submersible cable as required length all as directed for the following capacities :- 45/40 HP 3 Phase Note for item No. 5.00 to 8.00:- Replacement of defective parts with new parts shall be measured and paid separately under relevant item of schedule 'A' as supply only and fixing of the same is deemed to be included under this item.

All as per Sl No 5.00 but 35/30HP 3 phase

All as per Sl No 5.00 but 20/25 HP 3 Phase

All as per Sl No 5.00 but 2/1.5 HP single Phase

S&F in repairs Motor bush of gun metal upper and lower for 45/40 HPcapacity (Set of two) complete all as specified and directed.

All as per Sl No 9.00 but for 35/30 HP (Set of two)

All as per Sl No 9.00 but for 25/20 HP (Set of two)

All as per Sl No 9.00 but for 2/1.5 HP (Set of two)

S&F in repairs rotor bearings sleeve upper and lower for 45/40 capacity, (set of two) complete all as specified and directed.

All as per Sl No 13.00 but for 35/30 HP (Set of two)

All as per Sl No 7.00 but for 25/20 HP (Set of two)

All as per Sl No 7.00 but for 2/1.5 HP (Set of two)

S&F in repairs coupling arrangement with key for motor pump for 45/40 HP Capacity complete all as specified and directed.

All as per Sl No 17.00 but for 35/30 HP

All as per Sl No 17.00 but for 25/20 HP

All as per Sl No 17.00 but for 2/1.5 HP

S&F in repairs sand guard for submersible pump set for 45/40/35/30/25/20 HP capacity complete all as specified and directed.

S&F in repairs sand guard for submersible pump set for 2/1.5 HP capacity complete all as specified and directed.

S&F in repairs thrust bearing assembly for submersible pump set motor for the capacity 45/40/35/30 HP complete all as specified and directed.

S&F in repairs thrust bearing assembly for submersible pump set motor for the capacity 25/20 HP complete all as specified and directed.

S&F in repairs thrust bearing assembly for submersible pump set motor for the capacity 2/1.5 HP complete all as specified and directed.

S&F in repairs Neck ring suitable for 45/30/20 HP Pump complete all as specified and as directed.

S&F in repairs epoxy type cable jointing kit complete with all the jointing material, ferrule, for 1100 volts flat submersible copper conductor cable 25/16/10 Sqmm 3 cores complete all as specified and as directed. Make : REYCHEM / BIRLA 3 M / DENSON

All as per Sl No 27.00 but 4/2.5 Sqmm 2 Cores

S&F in repairs rubber gasket (packing) suitable for 80 to 150mm dia flange.

S&F in repairs MS Nut bolts with spring washers off sizes.

S&F in repairs steel wire rope 12 mm dia for hanging of submersible pump set complete all as specified and as directed.

S&F in repairs flat water proof submersible cable 3 core copper conductor, PVC insulated 1100 volts grade stranded 2.5 Sqmm , ISI marked and connected to submersible motor complete all as specified and as directed. Make:- Finolex / Havells/Polycab

All as per Sl No 32.00 but for 25 sq mm 3 core

All as per Sl No 32.00 but for 10 sq mm 3 core

S&F in repairs flat water proof submersible cable 3 core copper conductor, PVC insulated 1100 volts grade stranded 1.5 Sqmm , ISI marked and connected to submersible motor complete all as specified and as directed. Make:- Finolex / Havells/Polycab

Dismantling submersible pump, straightening & polishing of pump shaft, making screw and key way, turning surfacing polishing to impellers, CI bowl complete including replacement of worn out parts as per requirement all aas directed: 45/40 HP 3 Phase Note for SI No 36 to 39.00:- Replacement of wornout parts / spares with new components spares shall be measured and paid separately under relevant item of schedule'A' as supply only and fixing of the same is deemed to be included under this item.

All as per Sl No 36.00 but for 35/30HP 3 phase

All as per Sl No 36.00 but for 20/25 HP 3 Phase

All as per Sl No 36.00 but for 2/1.5 HP single Phase

S&F in repairs impeller with key and distance bushes for 45/40/30/20 HP capacity pump complete all as specified and as directed.

S&F in repairs PVC impeller for 1.5/2HP capacity pump complete all as specified and as directed.

S&F in repairs pump shaft of stainless steel suitable for 45/40/30/20 HP capacity pump complete all as specified and as directed.

S&F in repairs NRV for 45/40/30/20 HP capacity pump complete all as specified and as directed.

S&F in repairs bearing bush for submersible pump for 45/40/30/20 HP capacity complete all as specified and as directed.

S&F in repairs bowl assembly for submersible pump set for the capacity 45/40/30/20 HP complete all as specified and as directed.

S&F in repairs distance sleeves for submersible pump for 40/30/20 HP capacity complete all as specified and as directed.

Repair/maintenance of LT panel /Starter of any size/type, checking and tightening of all incoming and outgoing connections by replacing alluminium lugs, pieces of burnt wires as required to make the starter /panel functional complete all as specified and as directed.

S&F in repairs Bus Bar of 100 A and 415 V 4 Nos and joining all incoming and outgoing connectiom by suitable lugs complete all as specified and as directed.

S&F in repairs MCCB TP, 415V, 100 Amps with breaking capacity 10 KA complete all as specified and as directed. Make- L&T/Legrand/Siemens

S&F in repairs MCCB TP, 415V, 200 Amps with breaking capacity 25 KA complete all as specified and as directed. Make- L&T/Legrand/Siemens

S&F in repairs Over load relay for starter suitable for 45/40/35/30/25/20 HP submersible pump set complete all as specified and as directed. Make- L&T/Legrand/Siemens

S&F in repairs MCB 40 Amps, TPN, 415 volts,'C' Curve AC 10 KA complete all as specified and as directed. Make- L&T/Legrand/Siemens

S&F in repairs Power contactor TP as per existing type & make fitted at site for starter suitable for 40 HP/30HP/20 HP submersible pump set complete all as specified and as directed. Make- L&T/Legrand/Siemens

S&F in repairs Timer suitable for star delta starter for 40/30/25/20 HP submersible pump set complete all as specified and as directed. Make- L&T/Legrand/Siemens

S&F in repairs fully automatic star delta starter suitable for 50 HP pump set with relay 45-75 Amp in sheet metal enclosure complete all as specified and as directed. Make:- L&T MU-G 50 FASD cat part No CS 96009 /Schneider/ Legrand

S&F in repairs fully automatic star delta starter in replacement suitable for 30 HP pump set with relay 30-50 Amp in sheet metal enclosure complete all as specified and as directed. Make:- L&T MU-G 30 FASD cat part No CS 96008 /Schneider/ Legrand

S&F in repairs direct On Line starter for 2/1.5 HP Pumpset in sheet metal enclosure complete all as specified and directed. Make:- L&T/Legrand/Havells

S&F in repairs single phase preventer complete all as specified and directed. Make- L&T/Legrand/Havells

S&F in replacement change over switch on load type in open execution front handle operated 415V with rating of 200 Amps fore pole 415 volt complete all as specified and directed. Make- L&T/Legrand/Havells

S&F in replacement 70 W new generation energy saving, environment friendly, long life LED street light made up of pressure dia cast aluminium housing with high power LED as lighting source ans less embedded PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV built-in surge protection device and general purpose including 1.50 m long bracket with clamp and ut bolt for fixing arrangement and fixed on overhead tank's pillar/pump house complete all as directed. Make Havells/Bajaj/Crompton/Philips

Testing of drinking water (chemical analysis) as per IS : 10500 from authorised / approved lab after taking the sample from Pump houses in steralised container as per guideline of medical authority complete all as specified and directed. Sample testing Lab - Bharat test House/CIMEC/Spectro as approved by GE.

S&F in replacement new generation IP-65 POST TOP, energy saving, environment friendly, long aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high popwer LEDs as light source. Including fixing arrangement complete all as directed. Make Havells Cat No CORALPT35WLED757PSYMTOPC /Crompton/Philips

S&F in replacement Aviation Light with all necessary connection all as directed by Engr-In-Charge. Make Havells/Bajaj/Crompton/Philips

S&F in replacement MS column pipe 100 mm dia 3.00 m long, 5.8 mm thick both ends flanged duly welded on threads with 4 Nos mild steel flat iron ribs, and provision for passing of submersible cable including nuts, bolts and packing as requiredd complete all as specified and as directed. Make : Jindal/TATA/ Swastik/ Praksh Surya

S&F in replacement MS column pipe of size 150 mm in standard length of 3.0 m, heavy duty duly threaded at ends with provision of MS flange duly drilled and welded, all as specified & directed. Make : Jindal/TATA/ Swastik/ Praksh Surya

S&F in replacement phase sequencer cum pump protection system 415/440 volts, 50 Hz, internal working voltage 12/14 volt, suitable for 50 HP with MNX 100 comtactor capacity load for auto change of phase sequence if incommimg phase sequence changes, single phasing prevention system and adjustable low and high voltage protection system to protect the machinery, mounting on bracket made out 40x3 mm angle iron frame, all control wirings, cable connections as directed by Engr-in-Charge. Make : Indian Engineering Co/United Engineering

S&F in replacement wireless water level indicator Digital type with 7-segment LED display water level of the tanks in % with resolution of 1-2 % resolution, it receive water level data from transmitter and display in % with reset switch to put off the buzzer sound with fuse protection system on/off switch for Receiver display unit.including water level data transmitter with maintenance free water level sensor complete with maximum range of signal approx 500 m at arieal distance including necessary suitable size of copper cable connection for 230 volts supply complete all as specified and as directed. Make :-Aqua Brim model Penta cool challenger digital/Sapcon / Johnson automation and control

S&F repeater booster for re-transmitting the data signal from the data signal complete all as specified and directed. Make- Benzer/SAPCON/Aquabrim

Supply only chlorine testing kit comprising of samples of chlorine contents in seald tube from 0.1 to 2.0 PPM and othotodoline solution, testing tube complete all as specified and directed.

S&F in repairs pressure gauge size 100 mm dia round,range 0-10 Kg/cm2 complete with connecting pipe & air cock for 15 mm dia GI pipe complete all as specified and directed. Make- H guru/Japson

S&F in repairs 1100 volts grade cable PVC insulated 6 sqmm multistranded aluminium conductor, overall PVC sheathed twin core flat cable complete all as specified and directed. Make:- Havells/Polycab/ Grandlay/Plaza

Preetpowercontrol

commercial construction

M/S PASHUPATI TRADERS

H S ENTERPRISES

S B ENTERPRISES