GE 861 EWS-44/2024-25

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 depth for foundation etc or for shafts wells cesspits manholes pier holes etc n exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard and dense soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 depth for foundation etc or for shafts wells cesspits manholes pier holes etc n exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft /disintegrated rock complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft /disintegrated rock complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Removing of excavated material exc 250m but n.exc. 500m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors & pavings n.exc 15 cm thick (below or above ground level) complete all as specified and directed.

Demolition of brick or stone masonry built in cement mortar including all necessary arches, quoins, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store/credit from contractor complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundation filling and mass concrete / Bed concrete complete all as specified and directed.

M&L for RCC M-25 Design mix ( using 20mm graded crushed stone aggregate) as in foundation, including rafts, footing, foundation beams, plinth beams, bases for columns etc basement slabs complete all as specified and directed.

M&L for RCC M-25 Design mix (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, post and struts complete all as specified and directed.

M&L for RCC RCC M-25 Design mix (using 20mm graded crushed stone aggregate) as in RCC bands, lintels over 1.5 span etc. complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, bases of columns, sides and soffits, plinth beams and similar work complete all as specified and directed.

M&L for use & waste of form work sides of RCC bands etc, complete all as specified and directed.

M&L for use & waste of form work for sides of columns etc, complete all as specified.

M&L for RCC type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) in precast as in small culvert slab, manholes and soak well cover slab etc set in cement mortar (1:4) etc with and incl necessary form works as directed and fixed complete all as specified and directed. (Note:-Reinforcement shall be measured & paid separately).

S&F for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 21 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc. Complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified, of random rubble uncoursed walling, uncoursed or brought upto courses n. exc 20mm in depth complete all as specified and directed.

M&L for flush pointing to squared rubble stone masonry, coursed or uncoursed in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick work or concrete surface in cement mortar 1:4 finished fair without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M& L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:6 finishing even & smooth w/o using extra cement complete all as specified and directed.

M&L for applying two coats of oil bound distemper over one coat of alkali resistant primer (application of approved wall care putty 3mm thick to smooth & even surface) on new plastered surfaces including preparation of new surfaces complete all as specified and directed.

Material and labour for applying two coats of oil bound distemper to old treated plastered surfaces of wall including preparation of surface (by complete removal of existing treatment and brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots) (application of approved wall care putty 3mm thick to make the surfaces smooth & even) with Chalk whiting on plastered surfaces preparatory to distempering complete all as specified and directed.

M &L for preparing plastered or un plastered new surface of walls and applying two coats of Cement base paint on walls over a coat of alkali resistant priming paint complete all as specified and directed.

M& L for two coats of cement base paint on old plastered surface of wall including preparation of surfaces complete all as specified and directed.

M & L for broken stone hard core of gauge not exc. 63mm, deposited, spread and levelled rammed in layers not exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in Sub-base of floor complete all as specified and directed.

M & L for 100 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in sub base, floors and pavings etc. complete all as specified and directed.

M & L cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate), 100 mm thick as in sub base to flooring/hard standing complete all as specified and directed.

M & L for cement concrete 100mm thick,1:2:4 Type B2 (using 40mm graded crushed stone aggregate) as in floors/pavings laid in panels finished even & smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:2:4) type B-1, using 20 mm graded crushed stone aggregate as in surface channels and drains etc. complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate ) as in sub for receiving floor finishes etc. complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in coping, benching, haunchings complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundation/mass filling complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver blocks WITH GREY CEMENT AND PIGMENT any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L for forming 20 mm thick expansion joints with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade B in 100mm thick concrete flooring complete all as specified and directed.

M&L forming construction joints 30mm deep X10mm wide filled with sealing compound grade B in concrete flooring complete all as specified and directed.

S&F for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed/bedding layer 15mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for Non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular), area of each tiles exceeding 0.18 but not exceeding 0.38 in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles laid over and including cement screed bed 15 mm thick in cement mortar (1:4) laying as in floors complete all as specified and directed.

S&F coloured glazed wall tiles set 350x250x7mm/450x350x7mm size and jointed in neat cement slurry and pointed with coloured cement to match as in vertical surface including 15mm thick rendering in cm 1:4 on vertical surface to receive wall finishes complete all as specified and directed.

M&L for granite black colour 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plat?forms anthe like over and including screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for machine cut kota slab flooring 20-25 mm thick over and including 15 mm thick screed bed in cement mortar (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Machine cut kota slab flooring 20-25 mm thick in one piece in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick rendering in cm 1:4 on vertical surface to receive wall finishes complete all as specified and directed.

M&L for rounding to edges of stone slabs on edge such as steps cooking platform and other similar situations complete all as specified and directed.

S&F for stainless steel 3D letters with glossy finish of size 12 inches of adequate thickness as per the directions of Engineer-in-charge complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in plinth protection etc finished even & smooth without using extra cement complete all as specified and directed.

M&L for hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to true surfaces (broken stone or boulders) complete all as specified and directed.

S&F mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 290 Gde E-165 complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new steel surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth complete all as specified and directed.

M&L for 2nd class hard wood, plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamferred put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick panelled shutters (any number of panels) with panels of timber flat on both sides (feathered edged), or veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats complete all as specified and directed

Supply and fixed 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitred beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) (kail) complete all as specified and directed.

S&F for 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc windows/ ventilators, devided into square with plain chamferred or rounded, mitered and rebated sash bars any numbers , provided with stiles and rails as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.

S&F aluminium anodised barrel tower bolts extruded section of size 200 mm all as specified and directed.

S&F aluminium anodised barrel tower bolts extruded section of size 150 mm long complete all as specified and directed.

S&F aluminium handle extruded febricated type anodised of size 150 mm complete all as specified and directed.

S&F for butt hinges 125mm medium weight cold rolled mild steel complete all as specified and directed.

S&F for butt hinges 75 mm medium weight cold rolled mild steel complete all as specified and directed.

S&F MS helical door spring including roller & roller plate complete 300 mm size complete all as specified and directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

S&F for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605x605mm all as specified with hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long complete all as specified and directed.

S&F for 10 mm thick PVC insulation panels with EPS stuck to 1 mm th plain PVC sheet suitably placed in false celing grid made of aluminium GI/MS as per specification and drawing complete all as specified and directed.

M&L new plastered surface and applying 3 mm thick wall care putty and two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces over coat of pink primer to new surfaces including preparation of surfaces, over 10cm width or girth complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store15mm bore complete all as specified and directed.

S&F 15mm bore GI tubing medium grade with all fittings fixed to walls ceiling or laid in trenches complete all as specified and directed.

Fixing only 15mm bore GI tubing medium grade with all fittings fixed to walls ceiling or laid in trenches complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore complete all as specified and directed.

S&F 20mm bore GI tubing medium grade with all fittings fixed to walls, ceiling or laid in trenches complete all as specified and directed.

Fixing only 20mm bore GI tubing medium grade with all fittings fixed to walls ceiling or laid in trenches complete all as specified and directed.

Dismantling water storage tanks of any description 1000 litres capacity and removing from site complete all as specified and directed.

S&F for Rotational moulded polyethylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

S&F in repairs 15 mm bore fancy type CP bib taps cast copper alloy with crutch or butterfly nuts with chromium plated , handle, screwed down for iron pipe complete all as specified and directed.

S&F in repairs 15 mm bore brass CP wall mixer for mixing hot and cold water screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F in repairs 15 mm bore CP stopvalve/angle valve cast copper alloy screwed down, high pressure with crutch or butterfly handle fancy type complete all as specified and directed.

M&L for preparation of old painted on wooden surfaces of any description not otherwise described for over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described for over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described for over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L preparation of old decorated CGI sheet surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamelled paint (in Camouflage flauge pattern) complete all as specified and directed.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plate, rails braces etc, drilling for fixing of steel sheeting, hanging, fastening and fixing complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil as specified and directed.

S&F 10mm thick MS plates (plain or chequered) square cut or notched (ordinary and counter sunk) forming holes, weldied incl all necessary bolting or reveting etc with roof trusses Fe 410. W (Gde F-250) quantity A.

M&L for mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge/door,fixed with self-tapping screws as specified, complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded aggregate) as in sub for finishes etc complete all as specified and directed.

Taking down carefully old unserviceable point wiring copper/Aluminium (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces complete all as specified and directed.

M&L for concealed point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through and including non metallic rigid PVC Conduit not less than 25mm dia with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuity conductor connected to common earth dolly including required numbers and size of sunken box/ hylam sheet fixed on wall for fixing One light point controlled by one 5A switch, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: a) Colour coding shall be followed as given below:- i) Phase - Red/Yellow/Blue ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

All as per item No 97 but One Fan point controlled by one 5A switch complete all as specified and directed.

All as per item No 97 but One 5A flush type switch socket point on same board complete all as specified and directed.

All as per item No 97 but One 5A flush type switch socket point on independent board complete all as specified and directed.

M&L for concealed point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metallic rigid, not less than 25mm dia PVC conduit with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuity conductor connected to common earth dolly with and including sunken box/ hylam sheet in any module complete for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed.

M&L for concealed point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metallic rigid, not less than 25mm dia PVC conduit with all accessories such as tee, bends, elbow, reducers, junction box etc fixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4 sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuity conductor connected to common earth dolly with and including sunken box/ hylam sheet in any module complete for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: Colour coding shall be folowed as (a) Make of wire :- Havells/ Finolex/ Plaza/Gloster/Polycab. (b) Make of PVC conduit :- Precision/ pesto plast / National/Plaza (c) Switch socket measured & paid separately.

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed.

S&F White cover plate/Existing make with frame 3 module complete all as specified and directed.

S&F White cover plate/Existing make with frame 4 module complete all as specified and directed.

S&F White cover plate /Existing make with frame 6 module complete all as specified and directed.

S&F White cover plate /Existing make with frame 8 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 1 way 10A,1 module complete all as specified and directed.

S&F Modular switch 1 way 16A,1 module complete all as specified and directed.

S&F Fan step regulator, 120W - 2 module complete all as specified and directed.

S & F switch piano flush type single pole one way, 5/6 Amps complete all as directed.

Supply and fix switch sockets combination 5 pin 5 Amps flush type 240 Volts AC complete all as specified and directed.

Supply and fix switch socket combination 2 in 1, 5 pin, 5 & 15 Amps flush type universal controlled by one switch flush type 240 Volts AC complete all as specified and directed.

S & F fan regulator electronic dimmer, 450w,250V flush type and making all necessary connections complete all as specified and directed.

S & F lamp holder PVC/polycarbonate insulated body type complete all as specified and directed.

Supply and fixing of in of LED 9 watt pin type bulb complete all as specified and directed. Make-Havells/Philips/C&S

S & F MCB SPN 40 to 63 Amps,10KA 'C' series 240V complete all as specified and directed.

S & F MCB SP 6 to 32 Amps,10KA, 'B' series 240V complete all as specified and directed.

Supply and fixing new generation wall/surface mounted 18W LED batten fitting, 4 feet long surface mounted provides high quality economic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in repair of double door type vertical type TPN DB 4 Way ,415V with 200A busbar , with metallic double door type IP 43 IK 09 protection suitable for housing MCCB's all as specified and directed by EIC. Note : DBs shall be concealed in wall where ever possible including making good the surface to match with surrounding complete all as specified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 40 to 100 Amp 4 pole with suitable enclosure for fixing MCB in wall of carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 16 to 32 Amp 4 pole with suitable PVC/Metal Sheet enclosure for fixing MCB in wall of carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

M&L for sub-main wiring with 2 runs of 10.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including non metallic rigid PVC casing and capping not less than 25mm with all accessories fixed on wall//ceiling/truss etc as required, including one run of 10.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unserviceable sub main wiring and making good the disturbed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex/plaza/Gloster

Supply laying and testing of cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core complete all as specified and directed. Note : The cost of thimbles/lugs and cable gland, Pcc for panel base etc is included in quoted rate for connection for cable and no extra payment will be made for it. Make: Havells/Polycab/Finolex

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4x16 sqmm nominal cross section in service connections complete all as specified and directed.

M&L GI tube medium grade 40 mm bore laid in trenches or fixed on wall, floor or on pole with MS flat iron camp with bolts, nuts and washer of suitable size for cable protection complete all as specified and directed.

Supply and fixing new generation recessed mounting downlight ultra slim SQUARE/ROUND Luminaire 15 watt and high translucent diffuser provides high quality economic energy saving lighting complete all as specified and directed. (Suitable for modular/POP/Gypsum ceiling)

Supply& Fixing ceiling fan 1200 mm sweep, copper winding, double ball bearing with aluminium blade set of 3, length of down rod not less than 300 mm, single phase, 240 volts ISI marked, including connection with three core copper wire etc complete all as specified and directed. Note:- Service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen?ded by insulating hangers not more than 1 metre apart including 4mm dia GI suspension wire, one twin core cable flat or circular 10sqmm x 2 Core complete all as specified and directed.

S&F of double door type SPN DB 08 Way, 240V with 100 Amp copper busbar each phase, with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed by EIC. Note : MCB DBs shall be concealed in wall wherever possible including making good the surface to match with surrounding complete all as specified and directed.

M&L for Supply, laying and testing cable XLPE insulated screened pvc bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 10 Sqmm x 2 core complete all as specified and directed.

Supply and fixing, laying and testing of COB/Module LED light with mode regulator outdoor type, of any size in inch/sq inch or suitable for fixing in alphabetic words, water resistant light of 230 v single phase fixing on Alphabetic PVC/Steel frame complete all as specified and directed. Note: Color of COB/Module LED light complete all as specified and directed.

M&L for Supply laying and testing of cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core complete all as specified and directed. Note : The cost of thimbles/lugs and cable gland,Pcc for panel base etc is incl in quoted rate for connection for cable and no extra payment will be made for it. Make: Havells/Polycab/Finolex

M&L Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed.

M&L for Sub Class 'B' bricks as in covering protection to the electric cables laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth iron strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and directed.

M/S SMA and SONS CONSTRUCTIONS (BID ID -3126810)

FIRDOUS AHMAD BABA (BID ID -3126808)