TP1-083/2022-23

Amount

Clearing light jungle and disposing off to a place away from the site as directed by the Engineer in charge including all Labour charges,T&Ps etc., complete.

Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete.

Earth work excavation for foundation in soft disintegrated rock, latarite soft rock or kankar not riquiring blasting with an initial lead of 10 m and lift of 2m etc., complete.

Earth work excavation for foundation in medium rock and dense medium rock not requiring blasting. with an initial lead of 10 m and lift of 2m etc., complete.

Earth work excavation for foundation in hard rock measured in solid including blasting and stacking with an initial lead of 10 m and lift of 2m etc., complete.

Earth work excavation for hard rock by wedging, chiselling and trimming to proper shape where blasting is prohibited with an initial lead of 10 m and lift of 2m etc., complete.

Earth work excavation for levelling the yard area for main road & Yard road including all labour charges, T&P, initial lead, lift, etc. complete.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the buildingusing termite 250ml for 5 lit of water etc. complete.

Supplying and filling of M-sand in foundation and basement with well water and consolidation as per specn.incliding cost of all materials labour, lead, lift, etc., complete.

Providing and Laying , Spreading ad compacting graded stone aggregates Wet mix MACADAM including premixing the material with the water At OMC in mechanical mixing plant carriage of mixed material by tipper to site laying of uniform layers with pavers in sub base / Base course on well prepared surface watering and compaction with power roller to achieve the desired dnsity including cost of material labour charges rentals for machinery fuel and all other incidental charges etc., complete as per clause 406 of MORTh rev 5 and as direeted by the TANTRANSCO engineer incharge at site.

Plain cement concrete in PCC 1:3:6, using 20 mm HBG metal, for foundation/Padding Concrete excluding form work including cost of all materials, labour charges including consolidation, curing, all leads, lifts, etc., as per standard Specification complete.

PCC 1:2:4 using 20 mm HBG metal for foundation including cost of cement all materials lead, lift, etc., complete. With out Form work-plinth up to Ground Level

PCC 1:2:4 using 20 mm HBG metal for foundation including cost of cement all materials lead, lift, etc., complete. With Form work-plinth above Ground Level

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for foundation without formwork including cost of all materials, labour lead, litf, etc., complete. Without Form Work

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for column raft foundation without formwork including cost of all materials, labour lead, litf, etc., complete. With Form Work

RCC 1:1 1/2:3 using 12 to 20mm HBG metal for fencing post name board including cost of all materials, labour, centering charges, form work, lead, lift etc., complete but excluding cost of steel reinforcement. For footing with form work

RCC 1:1 1/2:3 using 12 to 20mm HBG metal for fencing post name board including cost of all materials, labour, centering charges, form work, lead, lift etc., complete but excluding cost of steel reinforcement. For Column with form work

RCC 1:1 1/2:3 using 12 to 20mm HBG metal for fencing post name board including cost of all materials, labour, centering charges, form work, lead, lift etc., complete but excluding cost of steel reinforcement. For road with form work

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal with formwork including cost of all materials, labour lead, litf, etc., complete. for column raft foundation

RCC 1:11/2:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For column concrete. upto plinth level

RCC 1:11/2:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For column concrete. above plinth level

RCC 1:11/2:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Grade beam concrete.

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for plinth beam with formwork including cost of all labour, materials, lead, lift, etc, complete. But excliding cost fo steel reinforcement (by using mixer machine).

RCC 1:1 1/2:3 mix using 12 to 20mm HBS metal (machine crushed) for continous lintel, water tank slab with formwork including cost of all materials, lead, lift, etc., complete.(by using mixer machine).

RCC 1:1 1/2:3 mix using 12 to 20mm HBS metal (machine crushed) for Sun shade 60cm. Projection 80 mm thick at wall end and 50 mm thick at free end and loft, with form work including cost of all materials, labour, leas, lift, etc., complete. (by using mixer machine).

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for " T " beam, bed block with centering shuttering including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement

RCC 1:1 1/2:3 using 12mm to 20 mm HBS metal (machine crushed) for roof slab concrete of 125 mm thick with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement.

RCC1:1 1/2:3 using 12mm to 20 mm HBS metal (machine crushed) for roof slab concrete of 150 mm thick with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For precast cover slab concrete.

Providing RCC 1:11/2:3 using 12-20mm graded hard machine broken granite stone with 100mm thick, including cost of all materials without form work, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Flooring concrete.

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for various structure plinth with formwork for footing including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. (By using mixer machine and vibrators) and as directed by the Engineer-in-charge at site.

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for Coloumn with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. (By using mixer machine and vibrators) and as directed by the Engineer-in-charge at site.

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for cable duct Wall with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. (By using mixer machine and vibrators) and as directed by the Engineer-in-charge at site.

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for Cover slab with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. (By using mixer machine and vibrators) and as directed by the Engineer-in-charge at site.

Providing precast slab in RCC 1:1 1/2:3 using 12 to 20mm HBG metal with form work cable duct with cover slab including cost of all materials, lead, lift etc., but excluding cost of steel reinforcement

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Brickwork in CM 1:5 mix using bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete. By using II class Champer Burnt bricks

Brickwork in CM 1:3 mix using II class chamber brick of size 9"x 4 3/8" x 2 3/4" for bath, fol, brick on edge, partition wall, superstructure including cost of labour materials, curing, lead, lift, etc., complete.

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, litf, etc, complete.

Plastering with CM. 1:3 mix 12mm thick for ceiling,fol, bath, RCC pillars, sunshade, loft, etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Plastering with CM 1:5, 20mm thick for brick pillar including cost of cement all other materials, lead, lift, curing etc., complete.

Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing etc., complete.

Providing projected border of 20cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, labour, lead, lift, etc., complete.

Providing and laying Solar reflective ceramic tiles of 305x305 mm x7mm over screed concrete 1:2:4 with average thickness of 25mm for required gradient and using best quality of one course of weather proof tiles of approved quality using CM 1:3, 12mm thick and using 3mm spacer and pointing with water repellent U bond and grout inclusing cost of all materials, transport, curing, etc., complete.

White washing two coats by using emulsion paint over primer coat with white colour for ceilings including cost of all materials, labour, lead, lift etc., complete.

Colour washing with two coats of inside wall using interior emulsion paint over a primer one coat and two coat of wall putty f Wall Putty paste of approved quality interior walls smootheing by scrapping with nice sand paper for interior surfaces as directed by the engineer at site including cost of all materials such as Oil bound distemper, Wall Putty paste, Primer and scaffolding, Labour, Lead, Lift etc., complete.

Outer colour washing with two coats of exterior emulsion paint at exterior surface and Wall Putty paste of approved quality exterior walls smootheing by scrapping with nice sand paper using ready mixed Weather Proof Exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer exterior surfaces including through scrapping, clan removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty whereever required.

Supplying and fixing of 5.00m wide gate and 1.00 Mtr. Wide wicket gate including cost of all materials lead and lift etc., complete including painting with two coats enamel paint over one coat of red oxide.

Labour charges for writing Name Board/ Slogans over the plastered surface wall in the control room including cost of paint & all materials, labour, lead, lift, etc. complete, as per standard specification.

Flooring with approved ceramic non-slippery tiles 300x300mm size of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete

Flooring with approved Vitrified tiles 600x600mmX8mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete.

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, labour, lead, lift, etc. complete.

Supplying and laying of Acid Proof Tiles for Battery Room of approved quality and colour laid in CM. 1:2 , 12 mm thick and pointing with white cement using 0.40Kg./m2 including finishing joint and pointing Flush with tiles surface including cost of cement all materials Labour ,curing , leads and lifts etc., complete.

Dadooing walls with with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 8mm of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supply and fixing in position of single leaf anodised aluminium fully glazed main door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with std.quality hydraulic floor spring, automatic door closure, rubber beedings, hinges, handle, etc., with 5.50mm thick sun cool glass, etc., complete. single leaf main door

M&F in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.00 x 2.10 m

UPVC windows: Specification:- Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mmx58mm and shutter profile size of 60x78mm profiles are reinforced with GI/1mm 125 GSM and 100% Corrosion free, the profile are multi chambered secctions with wall thick of 2mm. The EPDM rubber (Black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned, Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall 100% packing with screws and silicon packing all round the frames, The ventilator should be got approved from the Executive Engineer before use on work

UPVC Ventilator: Specification:- Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mmx58mm and shutter profile size of 60x78mm profiles are reinforced with GI/1mm 125 GSM and 100% Corrosion free, the profile are multi chambered secctions with wall thick of 2mm. The EPDM rubber (Black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned, Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall 100% packing with screws and silicon packing all round the frames, The ventilator should be got approved from the Executive Engineer before use on work

M&F in position of PVC door shutter made of Single Pannel laminated Plastic section of size 200 x 20 mm and PVC extraced shutter frame of size 24 x 60 mm including cost of 3 nos 85 mm butt hinges for single leaf door of size 0.80 x 2.00 m with 2 No aluminium handle and 2 nos 150 x 2 mm aluminiam towel bolt hinges etc., complete.

Supplying and fixing of Doors (Single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Aluminium anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour etc.,

Supplying and fixing Windows (2 leaves) of approved size using 35x35x5mm MS Angle for outer frame 25x25x3mm Angle for shutter frame with shutter 18 Gauge MS Sheet of bottom panel and top panel with 12 mm thick glass, fixing 12mm MS Rods horizontally (11 Nos.) with necessary locking Arrangements, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour for fabricated steel work including cost of all materials labour leads, lifts etc., complete.

Supplying and fixing of colour Europian type water closet with flushing cistern of Neycer/Parry ware with P"" or "S" trap, seat cover 15 mm dia connecting hos. 2 nos 15 mm dia CP angle valve, hand shower -1 No. including cost of all materials, lead, lift, etc., complete as directed by department Engineer at site

Supplying and fixing in position IWC ORISSA PAN of size 580X420mm colour glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc., complete.

Supply and fixing of wash basin of size 560x410mm coloured colour and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basine in the wall with GI/Alu. brackets, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. 40 mm dia

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. 32 mm dia

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. 25mm dia

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete. 20 mm dia

Supplying and fixing inposition of 40 mm dia GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.

Supplying and fixing inposition of 32 mm dia GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.

Supplying and fixing inposition of 25 mm dia GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Engineer before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Engineer before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Engineer before use on works).

Supplying Godrej Navtal lock of approved type with 6 livers including cost of locks with three keys leads, lead etc., complete.

Supplying and fixing of 12mm high quality brass screw down bib cock such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick, gareware or equivalent including the cost of all materials, labour, lead, lift, T&P etc. Complete.

Supplying and sticking the name stickers in doors identifying the rooms including cost of material, labour etc. complete.

Supplying and fixing of 2000 lit capacity sintex tank of approved quality including cost of materials labour for fixing lead lifts etc., complete

Providing PVC down fall pipe using 110mm dia 4 Kg / sqcm, PVC pipe and pvc clamp line supreme etc, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers.

Supplying and fixing black granite stone Engraved Foundation detail and year of construction fixing in wall at entrance, aproved make and quality including the cost of all materials, leads, lift, etc., complete

Supplying and fixing in wall at entrance, Digital wall clock 1 Nos, for Entrance 1.20x0.50 M - 2 Nos.and Bucket 15 Lit capacity With mug-2 set of approved make and quality including cost of all materials,labour, lead,lift etc complete.

Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing 100 x 50mm PVC floor trap in bath room with one pvc door bend shoe of 50mm.dia including cost of all etc., complete

Supplying and fixing of two side polished 20/30mm tk.cuddapah slab for cupboard,store & Office etc., including cost of all materials, labour, lead, lift, etc., complete

Providing shoring and shuttering in foundation using wooden planks and scantling including cost of all materials, lead,lifts, labour, etc , complete.

Refilling with excavated earth other than sand in foundation and sides of masonry, consolidation as per std.specn.with water including all, labour, lead , lift, etc., complete.

Removing the excess earth to the nearby bund or low laying area instructed by field engineer including all lead, lift, etc., complete.

Transporting and fixing of RCC cover slab from curing tank to working spot including cost of labour, lead, lift etc., complete.

Supplying and fixing readymade earth collars of size 60 cm inner dia with 30 cm height and shell thickness of 50 mm including cost of all materials,transport to site , labour, lead, lift, etc., complete., as per standard specification.

Collection, supplying, stacking and spreading of red gravel with compacted by power roller including cost of all materials lead lift labour etc complete as per the direction of site engineer.

Fabrication, Transport & fixing of GI angles for cable duct, fence post with anchorage and placing in position as directed by the engineer at site including cost of angles,cutting and all labour, lead, lift, etc. Complete (angle supplied by department).

Supply and fixing of 50 Sq.mm GI Chain link fencing of 10 gauge with standard width of 1.80m height including cost of all material, labour for fixing, transportion, lead, lift, etc., complete

Fabrication and supply of foundation bolts of 20mm dia including providing cleat at bottom and threading at top and galvanizing the top of bolt including cost of all materials, labour lead lift etc., complete.

Fabrication of template and assembling in correct position for various equipment plinth and grouting the foundation bolts including cost of all materials labour,lead,lift etc., complete

Erection of various tower parts vertical columns , booms etc as per drawing including sorting out at site , erection, tightening , punching , final checking, providing holes wherever necessary and final checking etc., complete including cost of all labour charges etc., complete.

Fabriaction, galvanising and supply of foundation bolts of 20,25,32,56 mm various sizes and nuts with washer in Galvanized Steel including threading with nuts and washers at top including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site

Supplying, transporting fabrication, fixing Labour charges for fixing of appd quality of MS Rails (90 LBS) for transformer plinth in proper alignment and interconnections the Steel rails with flat on both ends by welding including cost of rail, all materials labour charges, lead, lift etc. complete, as per standard specification

Supplying and Filling with quarry dust for yard portion including cost of all materials lead lift etc. Complete

Supplying and spreading of metal jelly of size 12 mm to 20 mm to an average thickness of 10 cm and over 5 cm stone dust, including cost of all materials lead, lift watering and levelling surface etc., complete.

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. S Type chair with nylon seated

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete.Three drawer steel table with Sunmica top of size 1200x750x750mm

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Steel side rack open type 1100x400x1200

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Steel half bench 1200x400x600mm

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. PVC Nylon chair of approved quality

Supplying and fixing 110mm dia PVC Bend including cost of materials, labour lead lift, etc. Complete

Supplying and fixing 110mm dia PVC TEE including cost of materials, labour lead lift, etc. Complete

Supplying and fixing of 20 mm PVC bib cock including cost of all materials, etc., complete.

Supplying and fixing CI.man hole cover of size for 0.60x0.60m inlet and outlet manhole and building outside man hole cover for heavy duty including cost of all materials lead, lifts, labour etc., complete

Supplying and laying PVC pipe 110 mm outer dia 6kg/ cm2 ISI make for laying the sewer line including cost of pvc pipe coupling lbour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete

Supplying and fixing of 110 mm dia PVC pipe with 4kg/sq.cm including all cost of materails lead lift etc complete.

Supplying and filling 40mm HBS metal for dispersion trench per standard specification including cost of all materials, lead lift etc. complete.

Supplying and fixing of 100mm dia PVC pipe, cowl for ventilating shaft., to a height of 10' length including cost of all materials, lead, lift etc. Complete.

Labour charges for transporting from casting yard to curing tank,curing tank to cable duct , aligning and laying of RCC pre cast slab as directed by the site engineer including all labour lead lifts etc complete

Supplying, Fixing of buzzers with 5A bell push switch etc complete.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Charges for geophysical survey for investigation of bore well point at various point in the SS site and to fix the maximum yield point with necessary instrument including labour lead, lift, etc, complete

Drilling of 150 mm Dia bore well above 200 M depth in all soils using power drilling machine including trasporting of drilling machine , fixing in position all labour, lead, lift etc Complete. Up to 200 metre depth

Drilling of 150 mm Dia bore well above 200 M depth in all soils using power drilling machine including trasporting of drilling machine , fixing in position all labour, lead, lift etc Complete. Above 200 metre

Supplying and providing Heavy duty 180 mm PVC casing pipe with ISI make to suitable 150mm Dia borewell 6KG/cm2 pressure including cost of all materials labour lead lift etc, Complete.

Supplying and fixing 20 mm Dia HDPE Air pipe (Pressure 10 KG/ cm2) of approved best quality of ISI make inside the bore well includung cost of all materials labour,lead, lift, fixing charges Etc, Complete.

Supplying and fixing 40 mm Dia HDPE suction pipe (Pressure 10 KG/ cm2) of approved best quality of ISI make for delivery pipe includung cost of all materials labour,lead, lift, fixing charges Etc, Complete.

Supplying providing and fixing of 20 mm Dia GI pipe " B " class of approved ISI make drain pipe to bore well including cost of all materials , labour, lead , lift, Etc, Complete.

Labour charges for fixing Compressor, motor and sump motor including cost of bed bolts with proper alignment with nesessary electrical conection in the pump room with, lead. lift ,etc. complete

Supplying and fixing of 32 Amps 3 phase Aerial fuse connections complete.

Supplying and erection of 1.5 HP capacity Suguna or Texmo motor 5 HP starter make including cost of al materilas C.W board,fixing of starter, Indicator bulb, Switch, Holders, Earth plate IC Aerial fuse carrier, Copper etc.

Supplying and erection of 5 HP capacity ELGI make (5BCP) Bore Well Compressure Pump with STD accessories with Suguna or TEXMO Motor 5 HP, 3 phase 1440 RPM TEFC - a class Motor BCH Starter (L&T make) icluding cost of all materials such as CW Board suitable for fixing starter etc., Indiacator bulb, switch Holders, Earth plate, IC unit and Aerial carrier and PVC copper wire reputed make for wiring labour, lead and fixing charge etc., complete.

Wiring with 2x1.5 sq.mm PVC insulated single core unsheathed copper conductor cable 1100 v grade in suitable PVC rigd pipe on wall and ceiling with reputed make switch boxes earthwire connection in 14 SWG TC wire for light point / Fan point including cost of wire ,labour lead etc. complete.of approved quality (For Electronic regulator)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.

wiring with 2 x 4 sqmm (56x0.3) PVC insulated single core unsheathed copper cable 1100 v grade in suitable PVC rigd pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150x100x63 mm TW Swich box with 3mm thick hylem sheet for 15 A 3 PIN non interlocking CS plug with continuous earth wire 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work etc. Complete with PWD earthing

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only.

Supply and fixing of 18W LED 3000K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting(SD 88).

Supplying and fixing of Slanding Holder with LED 14W Bulb with ISI approved quality including cost of all materials, labour, lead, lift etc, complete.

Supplying and fixing 40 W decorative Doom CFL bulb with fitting complete of ISI make including cost of all materials, labour charges all leads, lifts, etc., as per standard Specification complete.

Supply and fixing of 4'x40 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with 18 W LED bulb. (SD 96)

Supplying and fixing of 2 x 36 W FTL Street light fittings crompton make (SFE 1624 HSBN) including cost of all materials, labour, lead, lift etc., complete, as per standard specification.

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 1.0m down rod including fan clamp with side plates and cross arm of size 450 mm.

Supply and fixing of 450 mm sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make].

supply and fixing of Horizontal type 4 way pole neutral MCB distribution board in sheet steel enclosure with40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection.The MCBDB and MCB's should be with ISI mark)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work,with earth connections.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only.The MCB DB and MCB's should be with ISI mark (Like Standard make) (SD 167)

Supplying, Transportation, fabrication, galvanising of standard towers parts as per department approved drawing including of tower parts to site, all taxes and duties, freight charges etc., the raw material standard should be as per IS 2633 and 6745 and as per specification as per IS code directed by department engineer. (WC COLUMN, W BOOM)

Supplying, Transportation, fabrication, galvanising of standard Bolts and nuts as per department approved drawing including of tower parts to site, all taxes and duties, freight charges etc., the raw material standard should be as per IS 2633 and 6745 and as per specification as per IS code directed by department engineer (WC COLUMN, W BOOM)

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)