Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST AND REASONABLE | |
| 2 | L2₹27.0 L+₹3.5 L (15.1%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹28.9 L+₹5.4 L (23.2%)Rejected-Finance RONGMEN B IV BARAPANI PO SHILLONG 793103 | RI BHOI | MEGHALAYA | 793103 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹29.2 L+₹5.8 L (24.7%)Rejected-Finance F A ROAD MACHKHOWA PO PS BHARALUMUKH DIST KAMRUP M ASSAM GUWAHATI 781009 | KAMRUP METRO | ASSAM | 781009 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹31.0 L+₹7.6 L (32.3%)Rejected-Finance RONGMEN B IV BARAPANI PO SHILLONG 793103 | RI BHOI | MEGHALAYA | 793103 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
9 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Umroi
Military Engineer Services Garrison Engineer Umroi Umroi Military Station PO - Barapani, Shillong-793 103
WELCOME MAINT OF OFFR MD ACCN AT UMROI MIL STN UNDER GE UMROI
2023_MES_594554_1
8722/E8
Open Tender
Civil Works
Item Rate
180 days
Umroi
As per NIT
8 documents required · 8 mandatory
₹500
GE Umroi
₹60,000
30 Jun 2023
11 May 2023
10 Jun 2023
11 May 2023
9 Jun 2023
25 May 2023
Amount
Taking down of cement plaster of any description including racking out joints for key scrubing with water etc, complete all as specified and directed.
M&L for 15mm thick rendering in CM (1:4) in two layers mixed with liquid water proofing compound by weight of cement in top 5mm thick as per manufacturer instruction finishing the surfaces with fair and even without using extra cement, complete all as specified and directed. (Note:- WPC shall be measured and paid separately)
Supply only integral WPC ( Integral waterproofing liquid admixture for plaster mortar) all as specified and directed by Engr-in-charge. Make - Conplast WL,Sika,Dr.Fixit
M&L for 10mm thick in cement mortar (1:6) on brick or concrete surface finished even and smooth without using extra cement, complete all as specified and directed
M&L for prepration newly plastered surfaces of walls and applying two coats of antifungal paint over 1.5 mm thick wall care putty including one coat alkali resistant primer, complete all as specified and as directed.
M&L for prepration newly plastered surfaces of walls and applying two coats of distemper oil emulsion over 1.5mm thick wall care putty including one coat alkali resistant primer, complete all as specified and as directed.
M&L for applying two coats of distemper oil emulsion with 1.5mm thick wall care putty over a one coat of alkali resistant primer including complete removal of existing treatment of plastered surfaces of wall and preparation of surface, complete all as specified and as directed.
M&L for preparing old external surfaces of existing treatment by washing, rubbing down and stopping of weather proof paint and painted surfaces of external wall and applying one coat of antifungal paint, complete all as specified and as directed.
M&L for preparing old surface of existing treatment by washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of distemper oil emulsion, complete all as specified and as directed.
M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls, complete all as specified and as directed.
M&L for preparation of old painted wood and wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specifiede and directed
M&L for 10 mm thick backing coat of cement mortar 1:4 for as in vertical surfaces such as skirting , dados etc, complete all as specified and as directed.
Supply & Fixing of glazed ceramic coloured /printed tiles 350x250x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match on verticle surface of wall, complete all as specified and as directed.
M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed in CM (1:6) complete all as specified and directed
M&L for Virified Ceramic tiles Light shade 10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in skiting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.
M&L for 18 mm to 20 mm thick green marble slab for kitchen platform/shelf in one piece and vertical faces duly machine polished semi circular edging on external/projected surface over and including 20 mm thick screed in CM (1:6) complete all as specified and directed
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.
Taking up or down steel tubing and conncection 15mm, incl cleaning for re-fixing or removal to store, complete all as specified and as directed.
Supply & fix 15 mm bore Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in to walls, ceilings or in floors etc. any type of pipe, complete all as specified and directed.
Dismantling wall and ceiling boards (fibre,pulp, insulation etc.) or insulation boards / slabs/ blankets, any thickness, including fillets, complete all as specified and as directed.
S&F false ceiling of Designer tiles ivory painted (High Pressure steam cured) of 4 mm thickness (as per IS : 14862) of Size 595 X 595 mm and any of the design (Cascade or electra) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 grams, both side inclusive and black painted groove on all T webs) consisting of Main T runner with suitably spaced joints to get requered length and 15 X 32 mm made from 0.30 mm thick sheet 1200 mm long spaced between main "T" at 600 mm C/C to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x20x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc Main "T" runners to be suspended from trusses/ceiling using suitable suspension arrangement as per manufacturers instruction/literature, GI adjustable wire of 4mm dia with galvanized butterfly level clips, spaced at 1200 mm C/C along main "T", bottom exposed width of 15 mm of all "T" sections of 4 mm dia GI wire shall be pre-Painted with polyester paint and black painted groove at centre of Size 4mm depth and 4.5 mm width, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames )not exc 1.5 Sqm each, complete all as specified and directed.
S&F Aluminium powder coated [Minimum 50 Micron thick] anodised aluminium sliding frame and shutter with 92 mm x 31.75 mm x 1.5 mm thick three track section for frames and 40 x 18 x 1.55 mm thick sliding section for shutters of both gauzed and glazed with 5 mm thick tinted glass, and stainless steel wire cloth [0.63 mm nominal dia and avg width of aperture 1.40 mm] including necessary jointed, cleats powder coated glazzing clips, powder coated aluminium snap beadings, screw and aluminium fittings, suitable handle cum, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames ) exc 1.5 Sqm but not exc. 4.00 sqm each, complete all as specified and directed
S&F Pressed steel frames for doors with double rebates of size 105X60 mm including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed
S&F 32 mm thick waterproofing and fire proofing Flush door shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides both faces is covered with deco rative face veneer with lipping/frame to match, complete all as specified and directed.
S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed.
S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and removing from site, complete all as specified and directed.
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life), complete all as specifed and directed.
S&F Factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed.
S&F 100 mm long medium weight, cold rolled mild steel butt hinges, complete all as specified and directed.
S&F 150mm aluminum anodised bow handles, complete all as specified and directed.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
M&L for providing PCC 1:3:6 tupe C-1(using 20 mm aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
S&F in repair brass chromium plated superior quality central hole basin mixer 15 mm dia with popup waste system with 450 mm long braided hoses for wash hand basin, completed all as specified and directed.
S&F in repair Single piece WC with UF seat cover,hinges, accessories set, cistern fittings Cat No. C8939, S-220 Apollo New Rimless of size 690x 375 x 730 mm white color of make Parryware and equivalent complete with all accessories set as specified and directed by Engr-in-charge including fixing bolt and necessary connection with existing pipes, complete all as specified and directed.
S&F in repair brass CP Bottle trap 32mm for wash basin with inlet and outlets screwed for pipe or connection including necessary packing nion and cap, complete all as specified and directed.
S&F in repair vitrous china wash down water closet pan EWC , white including white plastic water closet seat & back with flat bottom and cover mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes, complete all as specified and directed.
S&F in repairs 100mm PVC (SWR) floor trap, with grating including jointing with solvent cement, pipe fixed in cement concrete type B-1 (1:2:4) in 75mm bore dia, complete all as specified and directed.
Material and labour for taking down of existing roof treatment from roof and terrace, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following steps and specifications:- a) Applying crack seal compound of same manufacture of waterproof to fill all cracks of observed on the roof. b) Applying cement slurry over concrete surfaces @3kg/sqm. c) Rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound as per manufactures’ instruction(not less than 3% by weight of cement) on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course). d) Applying evenly one coat of primer coating (diluted with water in the ratio specified by Manufacturers) (min @100-110Sq Ft per liter (diluted quantity)) on the cleaned plastered surfaces. The surface shall be left for air dry for minimum period of 2-3 Hrs. e) Applying evenly one coat of elastomeric water proof coat in one direction (as specified by Manufacturers)(min@ 0.9-1.0 sqm per ltrs) and allow to air dry for 4-6 hrs before applying second coat in other direction perpendicular to the first one (as specified by Manufacturers) (min @0.9-1.0 sqm per ltrs. The total thickness of two coats shall be 0.5 to 0.6 mm. f) The whole system shall be left for air cure for min Seven days (without any movement). Make : - Dr Fixit Newcoat Ezee or Berger Home Shield PU RoofKoat or Asian Paints Smartcare Damp Proof or as equivalent approved by GE. Note : - (i) The waterproofing shall be carried out in the last stage of execution to avoid any damages during the execution. (ii) Payment against this item shall not be allowed till completion of all the stages of work for any slab. (iii) The work shall be executed through well-trained applicators as per manufacturer’s instructions after obtaining written approval from the GE
Dismantling AC/CGI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets, complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating PPGL based corrugated/Trapezoidal steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating PPGL based plain steel sheet 0.60mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall eave board , fixed with self tapping screws, complete all as specified and directed.
Demolition of cement concrete above ground floor and pavings exc 15 cm thickness (below or above ground level) unreinforced, complete all specified and as directed.
M&L for PCC type D-2, 1:4:8 using (40 mm stone graded aggregate) as in sub base, complete all specified and as directed.
M&L for Screed bed or bedding layer & morter 15mm thick for laying floor finishes in CM (1:6), complete all specified and as directed.
M&L for 22-25mm thick PVC Moulded chequered cement concrete tiles of size (300x300)mm & set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments, complete all specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Material and labour for point wiring for the One light/fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly, complete all as specified and directed.
All as per item No 53 here in before but for one 3 pin 5 Amp socket outlet on independent board, complete all as specified and directed.
All as per item No 53 here in before but for one 3 pin 5 Amp socket outlet on same board, complete all as specified and directed.
All as per srl item No 53 here in before but one bell/buzzers point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size, complete all as specified and directed.
M&L for Point wiring with 4.0 sqmm FR PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable drawn in PVC casing and Caping on surface wall, ceiling with including continuous 4.0 sqmm copper conductor cable (FRLSH) (multistranded) PVC insulated and unsheathed Cable as earth wire to common earth dolly, complete all as specified and directed.
M&L for 1 Module / 2 M Box, complete all as specified and directed.
M&L for 3 Module Box, complete all as specified and directed.
M&L for 4 Module Box, complete all as specified and directed.
M&L for 6 Module Box, complete all as specified and directed.
M&L for 8 Module Box, complete all as specified and directed.
Modular Plate 1/2 module PC white, complete all as specified and directed.
Modular Plate 3 module PC white, complete all as specified and directed.
M&L for Modular Plate 4 module PC white, complete all as specified and directed.
M&L for Modular Plate 6 module PC white, complete all as specified and directed.
M&L for Modular Plate 8 module PC white, complete all as specified and directed.
M&L for Modular type 5 step Fan Regulator - 2 M oro white, complete all as specified and directed.
M&L for Modular switch 6 A One way switch white, complete all as specified and directed.
M&L for Modular 6 Amp Bell push switch, complete all as specified and directed.
M&L for Modular 6 A 5 pin socket, complete all as specified and directed.
M&L for Modular 6 A/16 A socket, complete all as specified and directed.
M&L for Modular 16 Amp One way switch white, complete all as specified and directed.
M&L for Dummy Plate - 1 Module Oro (White), complete all as specified and directed.
M&L for Lamp holder, 240 volt 50 HZ white PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings, complete all as specified and directed.
M&L for ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block,6A, complete all as specified and directed.
Supply and fixing LED fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.Make: Havell's Cat Part No: REGALBATTENT5UPTO1X18WDSBSWH for batten and TITANIANEO1213T8SSTL18WLED865SPC for tube light or HPL Cat part No: HPLEDT8 PC18(CW) for batten and HPLT81418PC(CW) for tube light or its equivalent in specified makes, complete all as specified and directed.
M&L for SPN Double Door Distribution Board 8 Way suitable for MCB as incomer complete all as directed cat Pt DHDNSHODAW08 of Havells or its equivalent, complete all as specified and directed.
M&L for MCBs single pole (SPN) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI merked) cat pt no- DHMZCSNF006-032 of Havells or its equivalent, complete all as specified and directed.
M&L for MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI merked) cat pt no- DHMZCSPF006-032 of Havells or its equivalent, complete all as specified and directed.
S&F in Replacement of existing sub main wiring with three run of single core (FRLSH) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC casing and caping of adequate size and making electric connections with proper colour coding, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Three run of 6.00 sqmm single core (FRLSH) PVC insulated copper conductor cable and one run of PVC conduit of suitable size will be measured as a one unit.
S&F in repair for 1 Module / 2 M Box, complete all as specified and directed.
S&F in repair for 3 Module Box, complete all as specified and directed.
S&F in repair for 4 Module Box, complete all as specified and directed.
S&F in repair for 6 Module Box, complete all as specified and directed.
S&F in repair for 8 Module Box, complete all as specified and directed.
S&F in repair Plate 1/2 module PC white, complete all as specified and directed.
S&F in repair Plate 3 module PC white, complete all as specified and directed.
S&F in repair for Modular Plate 4 module PC white, complete all as specified and directed.
S&F in repair for Modular Plate 6 module PC white, complete all as specified and directed.
S&F in repair for Modular Plate 8 module PC white, complete all as specified and directed.
S&F in repair for Modular type 5 step Fan Regulator - 2 M oro white, complete all as specified and directed.
S&F in repair for Modular switch 6 A One way switch white, complete all as specified and directed.
S&F in repair for Modular 6 Amp Bell push switch, complete all as specified and directed.
S&F in repair for Modular 6 A 5 pin socket, complete all as specified and directed.
S&F in repair for Modular 6 A/16 A socket, complete all as specified and directed.
S&F in repair for Modular 16 Amp One way switch white, complete all as specified and directed.
S&F in repair for Dummy Plate - 1 Module Oro (White), complete all as specified and directed.
S&F swing arm wall light lamp with LED bulb of dimension 9cmx18cm of Gold colour, complete all as specified and directed.
Schedule of Credit
M/S N K associates
M/s Jaiswal and Co
M/S RAJA CONSTRUCTION
M/S UB ENTERPRISE
MOINUL HOQUE CHOUDHURY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .