REPAIRS TO GATE, CHAIN LINK FENCING AND OTHER MISC WORKS AT ARMY LAND UNDER GE (I) CAMPBELL BAY

Amount

Dismantling of posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description as in fillets, fencing post,gate hinges etc. complete all as specified and as directed.

Demolition of precast cement concrete articles and precast concrete block waling in cement mortor or cement lime mortar etc all as specified and directed.

Dismantling fencing wire mesh of any type as specified and directed.

Excavating soft/loose soil in post holes (or similar holes) each n.exc 0.5 Cu.m getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance in exc 50m and making good surface. all as specified and directed.

Material & Labour for Plain Cement Concrete 1:4:8 type D2 (using 40mm graded aggregate) as in foundation concrete, filling and mass concrete including all necessary formwork & scaffolding if any complete all as specified and directed..

M&L for pre-cast reinforced cement concrete type B1 1:2:4 (20mm graded aggregate) in posts, fencing posts, straining or terminal posts,struts etc. for fencing average sectional area exc 100 and n.exc 250 sq cm with or without chamfered angles and flat, splayed, rounded or mitered tops making hole, cutting etc for receiving wire all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required for fixing including cranking bending spirally for hooping ends and binding with and including mild steel wire (ammended) not less than 0.9mm dia.

S&F TMT bars 6 to 8mm dia in reinforcement, cut to length, bent to shape required including cranking and bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

Ditto all per item No 10 above, but MS round bar 10mm dia and above of Grade Fe-410W(Grade E-250 quality A) or Fe-290(Grade E-165) complete all as specified and directed.

S&F Flat iron fillets (for securing wire mesh etc) including all necessay drilling bolting or riveting etc, and similar work confirming to Fe 290 Gde E-165 all as specified and as directed.

Supply only PVC coated chain link fencing of mesh size 50x 50 mm & made out of 3 mm GI wire with 1 mm thick PVC coating, including transportation to site at Campbell bay etc, complete all as specified and directed.

Supply & Fix Mild steel screw bolts (machine made) 10 to 12 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 125mm long with 3 mm thick one washer etc, complete all as specified and directed.

S&F framed works as in doors or gates or fencing post of angle or other section confirming to Fe 410-W with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering Doors etc to be prepared for hanging or fixing complete all as specified and as directed .

M &L for precast cement concrete block masonary with solid blocks, type C1 1:3:6 (20mm graded stone aggregate) exc 10cm in width and set in cement mortar 1:6 all as specified and as directed complete.

Material & Labour for Rendering 10mm thick in Cement Mortar 1:4 on fair faces of brick or concrete surfaces,finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new or previously treated steel surfaces of any description not exc 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Note : An amount of Rs 32160/- towards Schedule of Credit shall be deducted to arrive the Contract sum.

MAHESWARI CONSTRUCTIONS

Govinda Swamy Construction

B.R. ENTERPRISES

M/S Sudhir Kumar Gupta

Nirman Construction Company

Bismi Builders & Enterprises