REPAIR TO FLOORING PLASTERING SANITARY PLUMBING FITTINGS AND MISC BR WORK IN ZONE B AND C AREA OF AGE BR I CENTRAL UNDER GE CENTRAL KIRKEE

Amount

Taking down cement plaster on brick or stone walls or concrete surfaces etc., incl raking out joints, hacking for key scrubbing down with water complete all as specified.

Demolition of stone/brick /PCC block masonry built in cement mortar complete all as specified.

M&L for precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/cum and 28 days average minimum compressive strength of block should be 5 N/sqmm as in walling set in cement mortar 1:6 complete all as specified and as directed.

M & L rendering 15 mm thick on fair faces of brick/block masonry in CM 1:4 using water proofing compound @ 3% by wt. of cement and finishing plastered surfaces even and smooth without using extra cement complete all as specified. Note :- Rate for WPC shall be deemed to be included.

M & L rendering 12 mm thick on concrete surfaces in CM 1:6, finished even and smooth 'with sagol complete all as specified and directed by Engr-in-Charge.

M & L rendering 5 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth with sagol complete all as spd and directed by Engr-in-Charge.

M & L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.

M & L for preparing newly plastered surfaces of wall incl preparation of surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

M&L for applying three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and Brushing neat cement slurry with 3.00kg of cement per sq. metre complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor apron laid and bedded in any mortar etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm 'thickness (below or above ground level) complete all as specified.

M & L cement concrete 1:3:6 type C-2 (40 mm graded aggregate) as in floors plinth/ path etc 75 mm thick in alternate bays finished even and smooth surface without using extra cement complete all as specified.

M & L for 25mm thick cement concrete 1:2:4 type B-1 using 20mm crushed stone aggregate in levelling course for receiving floor tiles complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in floor, over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) in skirting, over 10mm thick rendering in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

M&L Vitrified ceramic tiles 8-9mm thick (square/rectangular) double charged/ultracharged dark shed area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over cement screed 15mm thick in CM 1:6 complete all as specified.

All as specified in item No.18 above but on vertical surface such as in skirting/dado etc over backing coat of 10mm thick rendering CM 1:4 complete all as specified.

M&L for Non Skid joint free ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including cement screed 15mm thick in CM 1:6 complete all as specified including demolition of floor or wall tiles, stone slab of any description or thickness laid, bedded and pointed in any mortar complete all as specified.

All as specified in item No.20 above but on vertical surface such as in skirting/dado etc over backing coat of 10mm thick rendering CM 1:4 complete all as specified.

M&L coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified.

M&L glazed coloured ceramic tiles size of tiles 300x200x5 to 6mm thick vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM 1:4 all as specified and directed.

M&L Glazed ceramic coloured tiles in vertifical surface 450x350x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering as a backing coat in cement mortar 1:4 all as specified and directed.

M&L for machine cut mirror polish kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (Using 20 mm graded stone aggregate) as in sub base for floor etc , complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and mirror polishing complete as specified and as directed.

M&L Machine cut cudappa stone slab 20-25mm thick as in steps, jambs, pillars, window- cills, cooking platforms and like over 15mm thick cement plaster in CM (1:4) and jointed in grey cement slurry mixed with pigment to match with shade of slab including rubbing, polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over 15mm thick cement Screed base in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down shutters of any description n. exc 1.00 sqm each resecuring, easing, adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed by Engr-in-charge.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed by Engr-in-charge.

Taking down shutters of any description exc 2.00 sqm each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed by engr-in-charge.

S&F in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete fixed stables all as specifed and as directed.

S&F in repair stainless steel fancy type curain rod 25 mm complete all as specified and directed.

S&F in repair stainless steel fancy type SS brackets, decorative knobs including all necessary fittings such as rawl plug screws complete all as specified and directed.

Taking down or up steel water tubings and connections bore of pipe 15mm dia all as specified and directed by EIC.

Refixing 15mm and 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and directed.

S & F 15 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors complete all as specifiedand directed by EIC.

Taking down or up steel water tubings and connections bore of pipe 20mm dia all as specified and directed by EIC.

S & F 20mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed by EIC.

M & L for providing cement concrete type B-1 (1:2:4) using 20 mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified.

Cutting existing for GI steel tubing 15 or 20 mm for alterations or additions as per the site condition complete all as specified and directed by Engr-in-charge.

Disconnecting existing water tank, setting aside (or lower if required) for repairs, cleaning with bleaching powder etc and hoisted if required reconnecting and refixing in same position including replacing necessary GI tubing, Tank Nipple, Float valve of capacity exc 500 & n exc 1000 ltrs including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipe etc complete all as directed.

S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description in any position complete all as directed.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description and in any position complete all as directed.

S & F in repair bib taps CP cast copper alloy fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm bore dia all as specified and directed by EIC.

S & F in repair water closet (Squatt Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor to match with existing complete all as specified and directed.

S & F in repairs wash down water closet (pedestal pattern) complete (excluding flushing cistern or flush pipe) pedestal pan and trap including connection to drain (or outgoing pipe) and flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F in repairs Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel hinge chromium plated all as specified and directed.

S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flushpipe, brackets all as specified and directed by EIC.

S&F in repair vitreous china wash down water closet pan size 655x370x770 mm (pedestal pattern) white with seat cover including flushing cistern,P/S Trap and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc and making good existing floor to match complete all as specified and as directed by Engr-in-Charge.( Make Cera Cat No. S1021109 with P/S Trap, Cat No. S1060103 for Cistern,Cat No B1810113 Twin flush fittings and Seat cover Cat No.B1520167)

S & F in repairs vitreous china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings all as specified and directed by EIC.

S & F in repairs viterious china wash basin white flat back size 450 x 300 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings all as specified and directed by EIC.

S&F in repairs vitreous China wash basin snow white pedestal pattern, white, flat back size 550X480mm excluding taps, waste pipe, china and plug and porcelain stopper but including brackets etc including all necessary fittings complete all as specified and as directed by Engr-in-Charge. Make Cera Cat No. S2040115 wash basin and Cat.No.S2090111 For Pedestal

S&F in repair long body/swan neck fancy type pillar tap for fixing to wash basin screwed for iron pipe and fixedwith necessary fittings and including PVC connection all as specified and directed. Make Cera Cat Part No F2004301

Supply only 32mm dia waste coupling of PTMT (half or full thread) min wt 40gms complete all as specified and directed.

S&F in repairs 32 mm bore PVC waste pipe of approved make suitable for WHB, Urinals etc all as specified and directed.

S&F in repairs Grating doom 125 mm dia with/without waste hole of SS complete all as specified and as directed.

S & F in repair pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm bore dia all as specified and directed.

S & F in repair stop valves/Angle cock CP cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia all as specified and directed.

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S & F in repairs brass CP shower rose 125mm size with swivel joint incl fixing to steel pipe complete all as specified and as directed.

S&F in repair two way angle cock with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed. (Make Prayag Cat No.7211)

S&F in repair for CP Health Faucet ABS Body with 1 Meter Flexible tube & Hook complete all as specified and directed. (Make-CERA /Prayag or equivalent)

S&F in repair for Stainless Steel Jet sprayet with 1 Meter Flexible tube (Make-CERA /Prayag or equivalent) complete all as specified and directed.

Taking down CP Brass mixer of any size and any pattern carefully from existing GI tubing connection and Refixing of mixer in the same point after minor repairs including changing of wall mixer legs any type and any pattern including necessary connected fittings and making good of surface area of wall tiles complete all as specified and as directed by Engr -in-Charge.

S& F in repairs Brass CP mixer 15mm provn for over head shower with 115 mm long bend pipe on upper side connecting legs and wall flanges for mixing hot & cold water, screwed down, three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and directed. (Make Prayag Cat Part No 7275.)

S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket & connection union to pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and directed.

S&F in reapairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing CI cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

S & F 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches, floor and wall including taking down old unserviceable pipe any description and any type complete all as specified.

S & F PVC (SWR) Pipes single socketed in any length with rubberring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified.

S & F in repair 110mm dia (bore of pipe) PVC bends (any radius), diminishing pieces or tapers (larger bore measured) with solvent joints, complete all as specified.

S & F in repairs PVC (SWR) bends 75mm dia bore any radius with access door all as specified and directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal all as specified and directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 75mm dia equal or unequal all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal all as specified and directed.

S & F in repair PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed.

M&L for the tile joint chemical cleaning and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, or equivalent , curing , cleaning the surface etc, complete all as directed by Engr-in-Charge and as per the sample done at ground level all as specified and directed.

M/S SUGAM CONSTRUCTION

S.R.M.K Enterprises

L.K.R.TIWARI CONSTRUCTION

VP DEVELOPERS AND CONTRACTOR

MAHESH DADAJI BACHHAV

JP ENTERPRISES

Shri Sant Cosntruction

AJINKYA VIKRAM GAIKWAD

Om Construction

Raj Associates