Supply, Installation, Testing and Commissioning of Fire alarm system at all Substation AIIMS Raipur

Amount

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.

Supplying, installation, testing & commissioning of smokedetector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered along with battery arrangement for power backup complete with all connections, interconnections as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

The Automatic High velocity water Foam spray system with arrangement of quartzoid bulbs & high velocity nossel completely protect for transformer along with MS pipe should be well designed to have adequate coverage of the entire transformer unit including conservation tank, bushing and bottom area, position of the nozzle should be such to protect all surfaces of transformer and the discharge rate for the system not less than 10LPM/m2 of the area to be protected with arrangement of appropriate capacity pump along with electrical panel for automation of pump including arrangement of delug valve ,butterfly valve , NRV, pressure guage , pressure switch, sprinkler, armoured cable with 2 nos 5000 litre water tank along with 50 litre capacity foam tank arrangement including all accessories required for making the system functional and as per direction of Engineer incharge.