ELECTRICAL WORK

Amount

CORTAGE OF STOR ITEMS FROM ESC TRIPULA RAEBARELI TO DUMP SITE AND DUMP SITE TO WORK SITE ALONGWITH LOADING UNLOADING AND PROPER STACKING:-

PCC POLE 8.5 Mtr Long

100 KVA T/F

ACSR Weasel Conductior

Stay Set Complete (16X1800) mm. Stay Rod

Earthing Complete

11 KV Composit Pin Insulators With Pins & Nuts Bolt

11 KV Composit Disc Insulators 45 KN T&C with Fitting

11 KV "V" Type X-Arms (65x65x6)

"T" OFF Channel (125X65X2240 MM)

Top Channel (125X65X2240 MM)

Gaurding Ciross Arms

G.I. Wire 6/10 SWG

LABOUR & ERRECTION CHARAGES:-

Digging of Pits then Errection of ST/PCC Poles alongwith all required accesories as per RESPO norms.

Grouting of ST/PCC Pole with grouting materials as per RESPO norms.

Earthing of ST /PCC Pols, as required, as per RESPO norms.

Dismantling of old existing 63 KVA T/F from D/Pole alongwith all accessories, then stacking of dump site with loading unloading, as per above details of Villages.

Mounting of 63 KVA T/F on existing D/Pole/Four Pole Structure alongwith fitting of all related accessories, earthing of T/F body & neutral As per RESPO norms.

The work for Earthing, Fensing and excavation of new Plinth size 2.00X2.00X1.50 for making outer wall of Plinth by 1st class brick work in Cement mortar of ratio1:6 of filling earth in Plinth and providing Ston ballast and fixing 02 No.90 Iballs Rail pieces (6.9 Mtr) of proper distance and then plastering the top and all side of plinth wall with cement Corse and sand in ratio 1:4 and then proper spraying of water alongwith All materials & Labour for Mounting of 100 KVA T/Fs on Plinth alongwith fitting of all accessories, as per RESPO Norms. All required material will be provided by contractor.

Making/Errection/Installation/painting/gouting/welding/febrication/earthig work of Wirmesh Fancing of Jali alongwith Angle isn size of 35X35X5X2500 mm with Nut & Bolts, Washer, Earthing Rod & G.I. wire. Making of 01 No. Gate by M.S. Angle in size of 35X35X5X1000 mm with Nut & Bolts Washer, Earthing Rod & G.I. wire. One No. Gate of M/S Angle in size of 25X5 mm with wiremesh and each of the same. Grouting of M.S. Angle and other required Angles with Grouting materials as per RESPO Norms, under BUSINESS PLAN 2024-25, under EDD DALMAU, Raebareli. All required material will be provided by contractor.

Digging of Pits, fixing Nozzling & grouting of Stay Rod inclucing fitting of all accessories with grouting materials as per RESSPO Norms

Laying , stringing & sagging of ACSR Weasal Conductor including all associated work & making clearance of Road with Joint/jumpers & binding on insulators as required.

Making/Fixing/Installation of 11 KV Disc Insulators T&C Type 4500 Kg with Fittings

Making/Fixing/Installation of 11 KV Composit Pin Isulators with Pin.

Work for Installation/fixing of Top Channel.

Work for Installation/fixing of "T" OFF Channel with Clamp & Nuts & Bolt

Making/Fixing/Installation of Cross Arms

Making/Fixing/Installation of Gaurding Cross Arms

Making/Fixing/Installation of G.I. Wire 6 /10 SWG,

Making/Fixing/Installation of G.I. Barbed wire, Material Provided by Contractor

Recd. Back 63 KVA old T/F from site to ESC Tripula, Raebareli wilth loading unloading.

Work for Installation/fixing of 'F" Bracket for PCC/ST Poles with Nut & Bolts, Material Provided by Contractor

Work for Installation/fixing/Tightening of Nut & Bolts, Material Provided by Contractor

Making/Fixing/Installation of Holding Clamp for PCC Poles With Nuts & Bolt, Material Provided by Contractor

Work for Installation/fixing of Stone Pad 300X300X75 , Material Provided by Contractor

Work for Making/ Installation Danger Board with clamp & nuts & Bolt , Material Proided by Contractor.

Work for Installation/fixing of Eye Bolt for Guard wires & LT Cable Catenary, Material Provided by Contractor

M/S Balaji Enterprises

M/S Shukla Traders