REPAIR/ MAINT OF INTERNAL, EXTERNAL ELECT, WATER SUPPLY AT DAD AND LT DISTRIBUTION SYSTEM AND WATER SUPPLY AND CONNECTED ITEMS AT ZONE J UNDER GE (S) BANGALORE.

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials and making good disturbed surfaces of walls, floors etc.

M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheated cable with multistandred copper conductor conforming to IS: 694:1990 (for phase, Neutral and and Earth) in and including Non metalic PVC rigid condiut medium grade ISI mark with all accessories concealed in wall/ ceiling/floor / road etc, with cast iron / pressed steel terminal box of sutaible size duly painted inner & outside by anticorrosive paint, including plastic laminated sheet 1.6 mm thick for mounting switches, socket cover with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of conduit and making good the distributed surfaces using cement plaster, levelling with existing surface complete all as specified and as directed for following- One light/ fan/ bell point controlled by one switch

M & L for One Light/ Fan point on same switch circuit board with other switches complete all as specified and directed by Engr-In-Charge

M & L 5 Amp socket outlet point on same board complete all as specified and directed by Engr-In-Charge

M & L 5 Amp socket outlet point independent but near switch board complete all as specified and directed by Engr-In-Charge

One light point controlled by two way switch complete all as specified and directed by Engr-In-Charge

All as per Item no 2 above here in before but with 2.5 sqmm size wire for power point concealed in wall complete all as specified and directed by Engr-In-Charge

M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheated cable with multistandred copper conductor conforming to IS: 694:1990 (for Phase, Neutral and and Earth) in and including Non metalic PVC rigid condiut medium grade with ISI mark of appropriate size with all accessories concealed in wall/ ceiling/floor etc, with GI flush in box/terminal boxes of sutaible size, including front plate for mounting of modular switch/ socket and combined cover plate with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of conduit and flush in box and making good the distributed surfaces using cement based plaster/POP complete all as specified and as directed for following- One light/ fan/bell/ point controlled by one switch

M & L for One Light/ Fan point on same switch circuit board with other switches complete all as specified and directed by Engr-In-Charge

All as per Item No 3 above here in before but for Modular type Socket 6/10 Amp of two module in independent board, 230 volts complete all as specified and directed by Engr-In-Charge. Make:

All as per Item No 3 above here in before but for Modular type Socket 6/10 Amp of two module on same board, 230 volts complete all as specified and directed by Engr-In-Charge.

All as per Item no 3 above here in before but for Modular type socket 16A of Two Module but with size 2.5 sqmm wire for power point concealed in wall complete all as specified and directed by Engr-In-Charge

M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheated cable with multistandred copper conductor conforming to IS: 694:1990 (for phase, Neutral and and Earth) in Existing conduit all accessories concealed in wall/ ceiling/floor / road etc, with cast iron / pressed steel terminal box of sutaible size duly painted inner & outside by anticorrosive paint, including plastic laminated sheet 1.6 mm thick for mounting switches, socket cover with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of conduit and making good the distributed surfaces matching with existing complete all as and as directed for following- One light/ fan/bell point controlled by one switch

M & L One Light/ Fan point as same switch circuit board with other switches complete all as specified and directed by Engr-In-Charge

M & L 5 Amp socket outlet point on same board complete all as specified and directed by Engr-In-Charge

M & L 5 Amp socket outlet point independent but near switch board complete all as specified and directed by Engr-In-Charge

All as per Item no 4 above here in before but with 2.5 sqmm size wire for power point in existing conduit complete all as specified and directed by Engr-In-Charge

M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheated cable with multistandred copper conductor conforming to IS: 694:1990 (for phase, Neutral and and Earth) in casing caping medium grade with all accessories, including cast iron / pressed steel terminal box of sutaible size duly painted inner & outside by anticorrosive paint, including plastic laminated sheet 1.6 mm thick for mounting switches, socket cover with fitting screw washer, including cutting chasses in wall for fixing of terminal boxes for mounting switch/sockets and making good the distributed surfaces using cement plaster, levelling to match with existing surface complete all as and as directed for following- One light/ fan/bell point controlled by one switch

M & L One Light/ Fan point as same switch circuit board with other switches complete all as specified and directed by Engr-In-Charge

M & L 5 Amp socket outlet point on same board complete all as specified and directed by Engr-In-Charge

M & L 5 Amp socket outlet point independent switch board complete all as specified and directed by Engr-In-Charge

All as per Item no 5 here in before but with cable 2.5 sqmm wire for power point in casing caping medium grade of appropriate size complete all as specified and directed by Engr-In-Charge

S&F for switch piano, flush type single pole, one way 5 Amps, 230 Volts complete all as specified and directed by Engr-In-Charge.

S&F for switch piano, flush type single pole, two way 16 Amps, 230 Volts complete all as specified and directed by Engr-In-Charge.

M&L for switch socket outlet 2 in1, 5pin, 5Amp with mounting arrengement on two/ four holes complete all as specified and as directed by Engr-in-charge.

M&L for socket outlet 2in1, 6pin, 5/15Amp multipurpose with mounting arrengement on two/ four holes complete all as specified and as directed by Engr-in-charge .

S&F for Modular type switch one way 6/10 Amps, 230 volts matching with existing complete all as specified and directed by Engr-In-Charge.

S&F for Modular type switch one way 16 Amps, 230 volts, matching with existing complete all as specified and directed by Engr-In-Charge.

S&F for Modular type Socket 6/10 Amps, 230 volts matching with existing complete all as specified and directed by Engr-In-Charge.

S&F for Modular type Socket 16 Amps, 230 volts, matching with existing complete all as specified and directed by Engr-In-Charge.

S&F for Modular type fan regulator 1/2 module as reqd matching with existing, 230 volts complete all as specified and directed by Engr-In-Charge. Make: Havells/Legrand/Cona/SSK

S & F of stepped type electronic fan regulator flush type complete all as specified and as directed by Engr-In-Charge.

S&F for Modular type bell push switch one way 6/10 Amps, 230 volts matching with existing complete all as specified and directed by Engr-In-Charge.

S&F Bell push piano type, 5 Amps complete all as specified and directed by Engr-In-Charge.

S&F for Ceiling rose surface mounted with three terminals, PVC/Polycarbonate isolated body complee all as specified and directed by Engr-in-Charge.

S&F Call bell AC, 230 Volts matching with existing sample complete all as specified and directed by Engr-In-Charge.

S&F in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20/32 Amps as reqd all as specified and directed .

S&F MCB, DB Double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including taking down complete all as specified and as directed.

All as per item No 21 above here in before but for SPN 8 Way DB complete all as specified and directed by Engr-In-Charge.

All as per item No 21 above here in before but for TPN 4 way DB 415 Volts complete all as specified and directed by Engr-In-Charge.

S & F in replacement VTPN DB - Dobule Door made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amp rated bus bar, 415 volt with PVC MCB blanking plate, stove enamelled for incorporated of MCBs, insulators and MCCB of capacity upto 125 Amps TP/FP etc, complete all as specified and as directed by engineer in charge.

Supply and fixing in replacement of MCB TPN 415 Volt 63 Amps Complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement of MCB SPN 6 - 40 Amps, 240 Volts Complete all as specified and as directed by Engr-in-Charge.

Supply & fixing in replacement of MCB SP 06-40 Amp, AC, 240 volts, Complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement of MCCB FP 415 Volts 125Amps, 16 KA Complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement of MCCB FP 415 Volts 100Amps, 16 KA Complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in replacement of MCCB FP 415 Volts 63 Amps, 16 KA Complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in replacement of Bus bar Chamber indoor type with aluminium bus bar 100Amp TPN, with four outgoing ways fabricated out of sheet steel, duly painted with stove enamelled paint over a coat of red oxide with locking arrangement and mounting arrangement flush in wall/fixed in wall as reqd complete all as specified and as directed by engr in charge.

S& F in replacement of Capacitor of rating 2.5/3.15 mfd 230 V complete all as specified and as directed by Engr-In-Charge.

S&F in replacement of Heating element 1500/2000Watt round/triangular type as reqd matching with existng at site complete all as specified and directed by Engr-In-Charge.

S&F in replacement of Thermostat for 25/50 Ltr cap geyser and making connection

S&F in replacement of PVC connection 15 mm bore with PTMT nuts of length 450mm

S&F in replacement of PVC connection 15 mm bore with PTMT nuts of length 600mm

S&F in replacement of 5 Amp switch socket with junction box complete all as specified and as directed by Engr-In-Charge.

S&F in replacement of 15 Amp switch socket with junction box complete all as specified and as directed by Engr-In-Charge.

S&F in replacement PVC insulated FRLS unsheathed multistranded copper cable1.5 sqmm complete all as specified and as directed by Engr-In-Charge.

S&F in replacement PVC insulated FRLS unsheathed multistranded copper cable 2.5 sqmm complete all as specified and as directed by Engr-In-Charge.

S&F in replacement PVC insulated FRLS unsheathed multistranded copper cable 4.0 sqmm complete all as specified and as directed by Engr-In-Charge.

S&F in replacement PVC insulated multistranded flexible 3 core copper wire 1.5 sqmm complete all as specified and as directed by Engr-In-Charge.

S&F in replacement PVC insulated aluminium stranded conductor cable 2 core 6 sqmm complete all as specified and as directed by Engr-In-Charge.

S&F in replacement PVC insulated aluminium stranded conductor cable 2 core 10 sqmm complete all as specified and as directed by Engr-In-Charge.

S&F in replacement of flush metal GI Box for Modular type switch and sockets flush in wall including cutting chasses to wall for fixing of box and making good to disturbed surface suitable for mounting 4 nos switch one module complete all as specfied and directed by Eng-In-Charge.

S&F in replacement of modular switch and socket mounting/cover plate with frame suitable for 4 module metal GI Box for modular type switches and sockets complete all as specified and directed by Engr-In-Charge.

S&F in replacement of flush metal GI Box for Modular type switch and sockets flush in wall including cutting chasses to wall for fixing of box and making good to disturbed surface suitable for mounting 6 nos switch one module complete all as specfied and directed by Eng-In-Charge.

S&F in replacement of modular switch and socket mounting/cover plate with frame suitable for 6 module metal GI Box for modular type switches and sockets complete all as specified and directed by Engr-In-Charge.

S&F in replacement pole mounted light fitting for outdoor use Post top laltern with aluminum die cast base suitable for mounting on 40mm dia pole/pipe and polycarbonate white diffuser suitable for and including 9W LED lamp with B22 base of color as decided including B22 lamp holder complete all as specified and directed by Engr-In-Charge.

S&F in replacement of surface mounted Mirror light LED batten 2 feet 10 W with all accessories as required flexible copper 2 core wire from fitting to ceiling rose complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of surface & wall mounted LED batten 4 feet 20 W including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all specified and as directed by Engr-in-Charge.

S&F in replacement LED weather proof bulk head light fitting of shape and size as per site requirment of wattage upto 10 watt matching with existing unserviceable light fitting with mounting clamp, LED driver holder, LED lamps etc including connecting up to in celling rose complete all as specified and as directed by Engr-in-Charge.

S&F in replacement LED downlighter light fitting of shape and size as per site requirment of wattage 15 to 20 watt matching with existing unserviceable light fitting with mounting clamp, LED driver holder, LED lamps etc including connecting up to in celling rose complete all as specified and as directed by Engr-in-Charge.

S&F in replacement LED recess/surface mounting as reqd 2x2 fittings 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with deffuser glare free light complete with driver, holders & LED lamp of colour as decided suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as derected by Engr-in-Charge

S&F in replacement building protection light fitting to be mounted on pole/bracket of minimum 35W, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, corrosion resistant including optics for scattering light complete all as specified and directed by Engr-In-Charge.

S&F in replacement LED inverter batten tube light fitting 4 ft 20 watts complete all as specified and as directed by Engr-In-Charge.

S & F in replacement LED Strip Light fitting of 10 watt including driver colour as desided at site complete all as specified and as directed by Engr-In-Charge.

S&F in replacement wall mounting light fitting in plastic body with lamp holder fancy B22 base and diffiuser sutaible for and including 9w LED Lamp of colour as decided with mounting provision complete all as secified as directed by Engr-in-Charge.

S&F in replacement ceiling fan motor of 1200 mm sweep complete with rotor, stator, outer body including 3 nos fan blades, down rod and other connected accessories matching with existing complete all as specified and as directed by Engr- in- Charge.

S&F in replacement Exaust fan motor of 250 mm sweep plastic body complete with rotor, stator, outer body and other connected accessories including mounting frame matching with existing complete all as specified and as directed by Engr- in- Charge.

M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, sunshades, shelves, lintels, etc. and cutting chases for concealed conduit wiring,edtc. And making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply and fix rigid non-mettalic PVC conduit medium grade exclusive of boxes but inclusive of all taxes, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. of external dia 20 mm all as specified and as directed.

S&F in replacement Exaust fan motor of 300 mm sweep metal body complete with rotor, stator, outer body and other connected accessories including mounting frame matching with existing complete all as specified and as directed by Engr- in- Charge.

S&F in replacement Exaust fan motor of 400 mm sweep metal body complete with rotor, stator, outer body and other connected accessories including mounting frame matching with existing complete all as specified and as directed by Engr- in- Charge.

Supply and fix in repair electric water heating tank system, storage type with plastic body inner tank and heating element upto 2 KW storage capacity 25 litre, repair safety valve, thermostate, NRV, inner tank, outer body connection pipe etc.including connecting up with three core copper conductor cable to 15Amps plug top including dismatling and refixing complete all as specified and directed.

M&L for preparation of surfaces for painting of Metallic Meter box/ Bus bar chamber of any size, with two coats of stove enamelled Paint of color as decided over a coat of red oxide primer both inside and outside of door complete complete all as specifed and as directed by Engr-In-Charge.

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through concealed/ casing caping/ PVC conduit as required at site including taking down complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through concealed/ casing caping/ PVC conduit as required at site including taking down complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

S & F LED flood light 30W made up of pressure die cast aluminium housing wth toughened glass and LEDs as a light source prewired with electronic driver suitable for 30 watts light fitting with IP 65 protection with Surge protection device for protection of LED driver, lumen efficacy of light fitting shall be not less than 100 lm/W. with necessary mounting arrangements colour as per deside at site including taking down old unserviceable light fitting.complete all as specified and directed by Engr-in-charge.

S & F LED Land Scape not less than 8W made up of pressure die cast aluminium housing and LEDs as a light source prewired with electronic driver suitable for 8 watts light fitting with IP 65 protection with Surge protection device for protection of LED driver, lumen efficacy of light fitting shall be not less than 100 lm/W. with pole of height upto 1 mtr including mounting arrangements on floor/ Earth using PCC of appropriate ration as required including taking down old unserviceable light fitting.complete all as specified and directed by Engr-in-charge.

Supply and charging of gas R407/410/134a/R32/R22/R12 to AC plant /split AC/ window AC /cooling appliances to maintain adequate gas pressure and seal the leakage of the unit if found leakage before chargeing the gas complete all as specified and directed by Engr in Charge.

Servicing of the following Window/Split ACs/Water cooler/Refrigerator/ Deep freezer of diferent capacities alongwith connected voltage stablizer by carrying out periodical maintenance including cleaning with compressed air to cooling coils, condenser,water wash to the internal cabin, leak testing of refrigerant pipes and arresting leakage if any and carrying out all sort of minor repairs as required ie, checking of the complete wiring,replacement of perished wires and reconnect complete all as specified and as directed. Note : - Cost of major spares ie, rewinding /replacement of condensor fan motors,capacitors compressor,blower fan, refrigerant copper tubing,relays, refrigerant gas etc, if required shall be measured and paid seperately under respective item of work (a) Window type AC of capacity upto 1.5 TR.

(b) Split type AC of capacity upto 3.0 TR.

M&L for removing the old unserviceable hermatically sealed compressor unit from window/split type AC of capacity upto 3.0 TR and fixing new sealed unit reciprocating type hermatically sealed compressor unit as per sample including charging of gas and oil to at adequate level complete all as specified and directed by Engr-in-Charge.

Supply and replacement blower/condensor fan motor suitable for 1.5 Ton window/ split type AC complete all as specified and as directed.

S&F in replacement indoor type unit of split type air conditioner 2.0 TR of existing make complete including blower, controller card, cooling coils remote control etc including testing and connection with outdoor unit complete all as specifed and directed by Engr-In-Charge.

S&F in replacement outdoor unit of split type air conditioner 2.0 TR of existing make including condensing coil, condensor motor and fan blade, hermetically sealed compressor suitable for Non CFC based Refrigerant gas, inlet outlet copper valves to connect with indoor unit and other accessories as required including testing and connection with indoor unit complete all as specifed and directed by Engr-In-Charge.

Supply and replacement fan blade for window AC 1.5/ 2.0 Ton complete all as specified and as directed.

Supply and replacement PVC insulated cable with copper conductor size 2.5 Sqmm, single core, 1100 volt grade, complete all as specified and as directed.

Supply and replacement PVC insulated cable with copper conductor size 4.0 Sqmm, single core, 1100 volt grade, complete all as specified complete all as spd and directed.

Supply and replacement starting capacitor of suitable variable Mfd matching with existing sample complete all as specified and as directed.

All as per item No 81 here in before but 36 Mfd.

All as per item No 81 here in before but 45 Mfd.

Supply and replacement insulation for refrigerant copper tubing of any size matching with existing complete all as specified and as directed

Supply and replacing refrigerant copper tubing 1/4" & 1/2" with 22 SWG seperately alongwith insulation sleeves, fixed on wall/ floor/ cealing for additional length (Required if any) as per site requirement including making joints duly brazed at ends complete all as specified and as directed.

Supply and replacing refrigerant copper tubing 3/8" & 5/8" with 22 SWG seperately alongwith insulation sleeves, fixed on wall/ floor/ cealing for additional length (Required if any) as per site requirement including making joints complete all as specified and as directed.

Supply and replacement for PCB of cooling unit of split AC 1.5/ 2.0 Ton complete all as specified and as directed.

Supply & fixing in replacement of potential correction unit, with digital display and designed for input variation between 140 V to 250 V with output voltage stabilized at 230 V within tolerance limit of capacity not less than 5 KVA complete all as specified and directed by Engr-In-Charge. VGuard/BlueBird/Microtek or as approved

Supply & Fixing in replacement 20 mm dia CPVC brass elbow complete all as specified.

Supply & Fix in repairs Bib taps, cast copper alloy 15mm fancy type, chrominium plated screwed down,crewed high pressure with capstan head, screwed down for iron pipe complete all as specified.

Supply and fix in replacement electric water heating system, storage type with plastic body inner tank and heating element upto 2 KW storage capacity 25 litre,complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.including connecting up with three core copper conductor cable to 15Amps plug top including dismatling old one and diposited in AGE E/M yard complete all as specified and directed.

Supply & laying CPVC pipes SDR 13.5 pipes & plain CPVC SDR 11 fittings walls/ceiling or laying in floors including taking down the old unserviceable GI pipe from trenches/walls/floors complete all as speicfied and directed for following sizes :-

All as per item No.92 above but with 20 mm dia

All as per item No.92 above but with 25 mm dia

All as per item No.92 above but with 40 mm dia

All as per item No.92 above but with50 mm dia

Supply & laying 20 mm GI pipe fittings Tubes, 'medium grade' galvanised with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches complete all as speicfied and directed for following sizes.

Supply & laying 40 mm GI pipe fittings Tubes, 'medium grade' galvanised with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches complete all as speicfied and directed for following sizes.

Supply & Fixing in repairs Gun metal gate valve 50mm with inner wheel head, screwed both ends in iron pipe and fixed in the following sizes

Supply & Fix in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of following sizes as under :-

15 mm dia with minimum weight 142 grams Complete all as specified and as directed by Engr-In-Charge.

20 mm dia with minimum weight 210 grams Complete all as specified and as directed by Engr-In-Charge.

25 mm dia with minimum weight 455 grams Complete all as specified and as directed by Engr-In-Charge.

Material & labour for scrubbing, cleaning thoroughly for removing the dirts,sediments,silts etc from the internal surfaces of UG sump (bottom & walls) by using brushes and bleaching powder and other cleaning materials as required including pumping arrangement for drain out the water and applying two coats of lime wash inside the wall surface of the tanks ,and two coats of colour applying(colour should be light yellow) on outside walls of sump including writing the words "military engineering services, tank capacity, date of cleaning and next due date" in capital letters of suitable size on outside visible surface of sump with synthetic enamel paint(white colour) over black background , and all the steel surfaces shall be painted with two coats of synthetic enamel paint(blue colour) after preparation of the surfaces at EDP/DAD pump house for the following sizes sump capacities as under :-

UG sump of capacity 5000 gallon at EDP centre pump house

UG sump of capacity 1.65 lakhs gallon at DAD/DCA pump house area

UG sump of capacity 1 lakh gallon at RWH sump in DAD/DCA area

Demolition of existing old unserviceable brick masonary valve chamber including demolition of unserviceable M.S iron cover and frame and construction of new valve chamber 60x60x60 cm inner dimensions, brick masonary in CM 1:4 PCC base in 1:3:6 of 7.5 cm thick & plastering 15 cm thick in CM 1:4 in inner side/coping of all chamber fabrication of iron frame 40x40x6 mm size angle iron MS cover 3mm thick with hinges and locking arrangements duly painted including excavation and earth work complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs new cast iron foot valve 80 mm dia flanged ends swing type operation,as per IS-4038 with necessary bolt and nuts etc, including taking down old unserviceable foot valve complete all as directed by Engr-in-charge . Make kirloskar/kartar

Supply and fixing in repairs new cast iron foot valve 100 mm dia flanged ends swing type operation,as per IS-4038 with necessary bolt and nuts etc, including taking down old unserviceable foot valve complete all as directed by Engr-in-charge . Make kirloskar/kartar

S&F gland packing of 10mm dia

S&F gland packing of 12 mm dia

Taking out old unserviceable star delta starter, supply and fix star dalta fully automatic in sheet metal enclosure type MN with SSP features suitable for operation of pumping set connected with induction motor of 25 HP Capaity 3 phase 415 Volts 50Hz AC supply complete all as specified and directed. Make L&T

Taking out old unserviceable DOL starter, supply and fix DOL fully automatic in sheet metal enclosure type MN with SSP features suitable for operation of pumping set connected with induction motor of 15/12.5 HP Capaity 3 phase 415 Volts 50Hz AC supply complete all as specified and directed. Make L&T

S&F MCCB TP 100Amps capacity with rupturing capacity 15KA On the existing panel board including taking down old MCCB connecting complete all as directed Make -L&T

Supply and fixing in replacement NRV of size 100 mm including taking down old U/s NRV Complete all as specified and as directed by Engr-In-Charge.

M&L for scraping the rusted surfaces and peeled off paint of entire pumping set including pipe lines of various sizes along with base foundation plates applying metallic paint on surfaces and making the surface smooth and applying a coat of synthetic enamel paint of existing shade and writing the MES/SM number on the motor/pump/pipes/etc set all as directed.

M&L for scraping the rusted surfaces and peeled off paint of entire pumping set including pipe lines of various sizes along with base foundation plates applying metallic paint on surfaces and making the surface smooth and applying a coat of synthetic enamel paint of existing shade and writing the MES/SM number on the motor/pump/pipes/etc set all as directed.

Excavation in trench not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and not exceeding 1.5m for laying of LT under ground cables/GI pipes getting out as in soft /loose soil complete all as specified and directed.

Returing & filling in trench spreading ,leveling watering and well ramming in layers not exceeding 25 cm deep as in deep as in soil Complete all as specified and as directed by Engr-In-Charge.

Removing excavated material n.exc 50 mtrs and deposting where directed at a leve n.exc 1.5 mtrs above starting point as in soil Complete all as specified and as directed by Engr-In-Charge.

Taking down carefully old unserviceable UG cable of any size from the trenches/wall/pole from site after affording credit including removal of brick cable cover Complete all as specified and as directed by Engr-In-Charge.

Supply, laying dry river sand in trenches for cable cushioning all as specified in clause 19.75 of SSR part-I. Note :- Punned thickness of sand only will be measured & paid.Complete all as specified and as directed by Engr-In-Charge.

Supply, laying, testing and commissioning of LT under ground cable XLPE in repair insulated armoured, heavy duty, elelctric cable, size 10 Sqmm 2 Core with stranded aluminium conductor, 1100 Volts grade conforming to IS -7098 (Part-I) 1988 laid in trenches /walls/floors /ducts etc fixed with saddle and clamps or passing through pipes complete with cable ends connection with proper thimbles nut bolts washer Complete all as specified and as directed by Engr-In-Charge.

All as per item No.121 but of size 10 Sqmm x 4 core

All as per item No.121 but of size 16 Sqmm x 4 core

All as per item No.121 but of size 25 Sqmm x 4 core

All as per item No.121but of size 50 Sqmm x 3.5 core

Supply and lay burnt bricks cable cover, class LV, type 1, flat, size 230mm x 115mm x 70mm in replacement of burnt bricks used as cable protection covers Complete all as specified and as directed by Engr-In-Charge.

Supply & Laying in repair GI tubing light grade of size 40 mm with necessary fittings as in cable protection laid in trenches/road/fixed on wall / floor including necessary clamps bolts and nuts complete all as specified and directed.

M&L preperation of surfaces of pole for painting of steel tubular pole, vertical with one coat of aluminium paint including painting black and white strip or as ordered by Engr-in-charge on poles up to 1.5 mtr high above coping level and numbering with writing letters or figures (Block), height not exceeding 30 cm high & letters and figures not exc 10 Nos complete all as directed.

M&L preperation of surfaces of pole for painting of PCC pole, vertical with one coat of aluminium paint including painting black and white strip or as ordered by Engr-in-charge on poles up to 1.5 mtr high above coping level and numbering with writing letters or figures (Block), height not exceeding 30 cm high & letters and figures not exc 10 Nos complete all as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

All as per No.130 but of 60watts

All as per No.130 but of 90watts

Supply and fixing LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.Complete all as specified and as directed by Engr-In-Charge.

Supply and fixing GI pipe bracket made of 40 mm bore light grade pipe made to shape of overall length of 1.2 mtr for fixing of security light fitting including MS clamps , nuts & bolts of required size Complete all as specified and as directed by Engr-In-Charge.

S&F in replacement of LED street light fittings driver for various capacity 45/60/90 watts Complete all as specified and as directed by Engr-In-Charge.

S&F inreplacement PVC conduit pipe from PVC junction boxes to street light bracket for protection of cable, fixing of clamp on PCC polesComplete all as specified and as directed by Engr-In-Charge.

S&F PVC 3 core copper cable 1.5 sqmm insulated for fixing of junction boxes to street light fittings Complete all as specified and as directed by Engr-In-Charge.

S&F in replacement of MCCB 3/4 pole as reqd 415 volt adjustable type of capacity 200 Amps with breaking capacity 36 KA Complete all as specified and as directed by Engr-In-Charge including taking down existing.

S&F in replacement of MCCB 3/4 pole as reqd 415 volt adjustable type of capacity 160 Amps with breaking capacity 25 KA Complete all as specified and as directed by Engr-In-Charge inckuding taking down existing.

S&F in replacement of MCCB 3/4 pole as reqd 415 volt adjustable type of capacity 125 Amps with breaking capacity 16 KA Complete all as specified and as directed by Engr-In-Charge including taking down existing.

S&F in replacement of MCCB 3/4 pole 415 volt adjustable type of capacity 100 Amps with breaking capacity 16 KA Complete all as specified and as directed by Engr-In-Charge including taking down existing.

S&F in replacement of MCCB 3/4 pole as reqd 415 volt fixed type of capacity 63 Amps with breaking capacity 16 KA Complete all as specified and as directed by Engr-In-Charge including taking down existing.

M&L for repairing of LT Panel by fixing broken hinges welding , greasing , internal MCCB/Bus bar cubicle 10NOs repairing , tightining of earthing including new hinges , locks welding /brazing , greasing including if reqd for complete LT Panel off up to size 1.7x1.2x0.4mtr Complete all as specified and as directed by Engr-In-Charge including taking down existing.

M&L for Preparaton of old surfaces for painting of existing LT Panel/feeder pillar size up to 1.7x1.2x0.4mtr by peeling existing paint layer and dust , cleaning of surface , and applying to coats of sytnhetic enamel paint of colour as decided over one coat of red oxide primer on all outdoor of LT panel including inner side of gates complete all as specified and directed by Engr-in -Charge.

S & F in replacement of Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts for LT, size not less than 20x15cm complete all as specified and as directed by Engr-In-Charge.

S & F in replacement of Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts for HT, size not less than 25x20cm complete all as specified and as directed by Engr-In-Charge.

Dismentling of Feeder piller box of any type any size complete all as directed.

Supply and fixing in replacement LT Feeder pillar Panel board outdoor type fabricated out of 3.15mm thick CRCA Sheet steel factory made vermin proof duly painted with two coat of synthetic enamelled paint over a coat of red oxide primer or powder coated, double door, water proof dust and vermin proof hinged and lockable doors inlcuding rain protection cover on top and complete with interconnections, with copper wires, tapes, opening from both sides with cable entry from bottom,double door type with both side opening of doors with locking provision and gaskets at opening , all as per Item No 18 but with Aluminum bus bar of capacity 125 Amps and with provision of mounting MCCB 125 Amps, 4-pole including Digital type Voltmeter and Ammeter, bonding to earth and painting, including angle iron frame of size minimum 40x40x6mm having 4 legs 0.60 mtr long including grouting in PCC 1:4:8, to the reqd depth including under mentioned Items all as specified and directed by Engineer-in-Charge. (Note: MCCB will be measured and paid separately.)

M&L for sand cushioning in trenches for bricks of u/g cable with coarse sand laid dry in trenches with uniform thickness.

Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection all as specified and directed.

Taking down carefully old unserviceable UG cable of any size from the trenches/wall/pole from site after affording credit including removal of brick cable cover complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium sonductor of size 10 Sqmm x 2 core including taking down unserviceable UG cable Complete all as specified and as directed by Engr-In-Charge.

All as per Item No 166 but of size 16 Sqmm x 4 Core complete all as specified and directed by Engr-in-Charge.

All as per item No.166 but of size 35 Sqmm x 4 core complete all as specified and directed by Engr-in-Charge.

All as per Item No 166 but of size 50 Sqmm x 3.5 Core complete all as specified and directed by Engr-in-Charge.

All as per Item No 166 but of size 70 Sqmm x 3.5 Core complete all as specified and directed by Engr-In-Charge

All as per Item No 166 but of size 95 sqmm 3.5 Core complete all as specified and directed by Engr-In-Charge.

All as per Item No 166 but of size 300 Sqmm x 3.5 Core complete all as specified and directed by Engr-In-Charge

M&L preparation of surfaces of pole for painting of steel tubular pole,vertical with one coat of aluminium paint incluing painting black and white strip or as ordered by engineer-in-charge on poles up to 1.5 mtr high above coping level and numbering with writing letters or figures(Block), height not,exc 30 cm high & letters or figures n'exc 10 Nos complete all as directed.

M&L preparation of surfaces of pole for painting of RCC pole ,vertical with one coat of aluminium paint incluing painting black and white strip or as ordered by engineer-in-charge on poles up to 1.5 mtr high above coping level and numbering with writing letters or figures(Block), height not,exc 30 cm high & letters or figures n'exc 10 Nos complete all as directed.

S&F PVC 3 core copper cable 1.5 sqmm insulated for fixing of junction boxes to street light fittings Complete all as specified and as directed by Engr-In-Charge.

S&F of three phase MS based street light timer panel of rated voltage 415 volts, 200 A of frequency 60 Hz as directed by Engr-in-charge.

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts and washers made out of GI/steel earth strip protected by GI light grade pipe of 40 mm dia and connecting to main panel board/switch board/control board all shown in electrical plate No 3 of SSR Pt I incl PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10 cm center to center both ways incl earth work like excavation, returning filling back disposal etc complete.

M&L for strip opening of Pump set of capacity upto 25 HP of any stage/size/ make, de-coupling from motor and removing from mounting frame, taking out shaft, impellers, bushings, rings etc and re assembling after replacement of defective items including replacement of gaskets, including testing on competion of job complete all as specified and directed by Engr-In-Charge. (Note: (a) Major defective items replaced will be measured and paid seperately under respective item of schedule, cost of minor items not mentioned in schedule and trasportion if reqd for job are deemed to be included in quoted rates. (b) During testing if pump set is not able to deliver at rated capacity, contractor has to re open and re assemble pump after making pump able to deliver at rated capacity without any financial effect.

Supply only following items to be fixed under items above for repair of pumps complete all as specified and directed by Engr-In-Charge.

Pump shaft stainless steel matching with existing suitable for upto 25 HP pump complete all as specified and directed by Engr-In-Charge.

Impeller bronze/gunmetal matching with existing suitable for upto 25 HP pump complete all as specified and directed by Engr-In-Charge.

CI Neck ring of size and specifications matching with existing for any size of pump complete all as specified and directed by Engr-In-Charge.

Gun metal intermediate bush of size and specifications matching with existing for any size of pump complete all as specified and directed by Engr-In-Charge.

Suction/Discharge bush of size and specificaton matching with existing for any size of pump complete all as specified and directed by Engr-In-Charge.

Middle distance bush of size and specification matching with existing for any size of pump complete all as specified and directed by Engr-In-Charge.

CI bowl for pump of size and specification matching with existing for any size of pump complete all as specified and directed by Engr-In-Charge.

CI Sleeves for pump of size and specification matching with existing for any size of pump complete all as specified and directed by Engr-In-Charge.

Supply and fix Bearing of any type suitable for Motor/Pump of capacity upto 25 HP including dismantling of existing unserviceable bearing complete all as specified and directed by engr in Charge.

M&L for Strip opening 3 phase any electric motor taking out burnt winding coils complete and rewinding with insulated water proof winding wire matching with existing size including seal PVC (water proof compound) reassembling the motor and testing at workshop complete all as specified and directed. (Note: Insulation to wires, windings, varnishing,and other items required for rewinding and making motor water proof not mentioned in description and T&P required for this job is deemed to be included in quoted rates.)

Supply and fixing in replacement thrust plate matching with existing size suitable for upto 25 HP Pump complete all as specified and directed by Engineer-in-Charge.

M&L for laying , connecting & testing 3 core copper conductor flexible PVC insulated heavy duty unsheathed cable 1100 volts grade10 Sqmm in ducts /on ground /through existing pipes etc including taking out unserviceable flexible cable complete all as specified and as directed by Engr-In-Charge.

M&L for laying , connecting & testing 3 core copper conductor flexible PVC insulated heavy duty unsheathed cable 1100 volts grade 06 Sqmm in ducts /on ground /through existing pipes etc including taking out unserviceable flexible cable complete all as specified and as directed by Engr-In-Charge.

M&L for of iron work of any type incl cross arms ,supports , bracing MS clamps etc made out of MS channel/angle iron/ flat iron/ round section of any size and bolts, nuts and washers incl painting with two coats of aluminium paint over a coat of red oxide complete all specified and as directed by Engr-In-Charge.

Taking up cast iron/Ductile Iron /GI/CPVC /PPR water mains including all fittings, with spigot and socket ends and lead joints including burning out joints of size of up to size 200mm dia complete all as specified and directed by Engr-In-Charge.

Laying only Pipes of any grade and type upto 50 mm bore with all new fitting in trenches (Obtained from Taking up/down) after cleaning complete and all as specified and as directed by Engr-in-Charge.

Laying only Pipes of any grade and type above 50 mm bore and upto 200 mm bore with all new fitting in trenches (Obtained from Taking up/down) after cleaning complete and all as specified and as directed by Engr-in-Charge.

Supply and fixing 50 mm bore Mild steel tube medium grade galvanised with all fitting laid in trenches complete and all as specified and as directed by Engr-in-Charge.

Supply and fixing 40 mm bore Mild steel tube medium grade galvanised with all fitting laid in trenches complete and all as specified and as directed by Engr-in-Charge.

Supply and fixing 25 mm bore Mild steel tube medium grade galvanised with all fitting laid in trenches complete and all as specified and as directed by Engr-in-Charge.

Supply and fixing 20 mm bore Mild steel tube medium grade galvanised with all fitting laid in trenches complete and all as specified and as directed by Engr-in-Charge.

Supply and fixing 15 mm bore Mild steel tube medium grade galvanized with all fitting laid in trenches walls and ceilings or laid in floors complete and all as specified and as directed by Engr-in-Charge.

Supply and laying CPVC SDR 11 Pipes & Plain CPVC SDR 11 fittings with all fittings, bends, nipple, elbow coupler etc laid in trenches/walls/ceilings/ floors of size 25 mm bore all as directed of following sizes complete and all as specified and as directed by Engr-in-Charge.

M & L for joints in CPVC pipes using suitable cement based solvent, coupler, transition bush, collar of required size, threading if required including grinding, cutting and finishing of size upto 50 mm bore straight joint work including testing on completion complete all as specified and directed by Engr in Charge.

Taking down of gate valve of any size complete all as directed.

Supply and fixing of 50 mm bore gate valve Gun metal screwed down high pressure with crutch with or butter fly handle screwed booth ends for pipe complete and all as specified and as directed by Engr-in-Charge.

Material and labour for run lead joint to 150 mm bore complete and all as specified and directed by Engr-in - Charge

Material and labour for run lead joint to 100 mm bore complete and all as specified and directed by Engr-in - Charge

Material and labour for run lead joint to 80 mm bore complete and all as specified and directed by Engr-in - Charge

M&L for Preparation of surface & painting the Motors with Pump of any size anty capacity complete after cleaning & applying one coat of stove enamelled Blue paint by spray painting as requirment at site matching with existing, writing MES No/ SM No complete all as specified & as directed by Engr -in-Charge.

M&L for Breaking road, pavement, hard standing, tiles of any type, including excavation of subbase, soil upto the depth of 0.60 mtr and width 0.45 mtr by mechanical means for fault finding in water pipe lines and including making good to the disturbed surfaces matching with existing after rectification of fault including removal of surplus material to nearby dumping point complete all as specified and directed by Engr-In-Charge. Note:(i) Any T&P required for work is deemed to be included in quoted rates. (ii) Tiles, cement concrete etc. required for making good is deemed to be included in quoted rates.

SREE CONSTRUCTIONS (BID ID -3479047)

RAMSON TRADERS (BID ID -3484327)

PRIYADARSHINI CONSTRUCTIONS (BID ID -3480962)

JAIHIND ENTERPRISES (BID ID -3484290)