Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC JAGANOO PO JAGANOO JAGANOO DISTT UDHAMPUR1 UDHAMPUR JAMMU KASHMIR 182124 | UDHAMPUR | JAMMU AND KASHMIR | 182124 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹18.0 L+₹1.1 L (6.44%)Rejected-AOC | L2 | Rejected-AOC Rejected due to not being L1 | |
| 3 | L3₹18.3 L+₹1.3 L (7.94%)Rejected-AOC B 1 2 MAHESH NAGAR AMBALA CANTT 133001 HRY | AMBALA CANTT | AMBALA | HARYANA | 133001 | L3 | Rejected-AOC Rejected due to not being L1 | |
| 4 | L4₹19.7 L+₹2.7 L (16.2%)Rejected-AOC | L4 | Rejected-AOC Rejected due to not being L1 | |
| 5 | L5₹20.2 L+₹3.2 L (19.1%)Rejected-AOC | L5 | Rejected-AOC Rejected due to not being L1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
18 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
GE NORTH UDHAMPUR
GE U(N) 34 2023 2024 PERIODICAL SERVICES INCLUDING CERTAIN MISC REPAIR IN MD OTM ACCN AT PB ENCLAVE UNDER AGE B R I OF GE (NORTH) UDHAMPUR
2023_MES_604477_1
GE/U(N)-34 2023-24
Open Tender
Civil Works
Item Rate
330 days
GE NORTH UDHAMPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE NORTH UDHAMPUR
₹50,000
Yes
30 Aug 2023
20 Jun 2023
20 Jul 2023
20 Jun 2023
18 Jul 2023
4 Jul 2023
Amount
M&L for demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.
M&L for demolition of cement concrete (un reinforced) in ground floor and paving n/exe 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for dismantling floor, hearth or wall tiling including Cement Mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed.
M&L for taking down cement or cement lime plaster on brick or stone walls etc of any description including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for taking down chowkhats or frame exc 1.5 sq.m but n.exc 4 sq.m with shutter (without taking off shutters from the frame) and remove from site complete all as specified and directed.
M&L for taking down shutter of any description exc 1 Sq.m and n/exc 2 Sq.m each complete all as specified and as directed.
M&L for dismantling water tanks of 1000 ltrs and removing to store, complete all as specified and as directed.
Dismantling water tanks of 500 ltrs and removing to store, complete all as specified and as directed.
Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 15 mm bore laid on floor or wall complete all as specified and directed.
M&L for taking up or down steel tubing and connection, including cleaning for refixing or removal to store of size of pipe 20 mm bore laid on floor or wall complete all as specified and directed.
M&L for dismantling boarding any description, fixed in any position with nails complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cm 1:4 complete all as specified and as directed.
M&L for brick work with old size bricks, using old serviceable bricks, as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks; straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work in cm 1:6 finished even and smooth w/o using extra cement all as specified and directed.
M&L for rendering 15mm thick on stone masonary surfaces or surface other than fair face of brick work in cm 1:4 finished even and smooth w/o using extra cement complete all as specified and directed.
M&L for non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 10 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed.
M&L for glazed ceramic coloured tiles 450mm x300mm x 6 to 7 mm thick,sharp edged (joint free), in vertical surfaces such as walls, skirting etc , set to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for granite work with 16mm thick slab, table rubbed and polished, in steps, window cills, cooking platforms and like in single piece set in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cement mortor (1:4) complete all as specified and directed.
M&L for 50mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in plinth protection finished even & smooth with out using extra cement including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners as mandatory and filled with sealing compound grade A complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles complete all as specified and directed.
M&L for reinforced cement concrete, 1:11/2:3, (Nominal mix), type A-1 (using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, shelves and like complete all as specified and directed.
M&L for form work to edges of concrete flats, treads, breaks in floors, window cills, floor and roof slabs and shelves, horizontal or sloping and similar work exc 5cm but not exc. 10cm wide complete all as specified and directed.
M&L for form work to soffits of suspended slabs such as floor slab,landings and similar work not exc 200mm thick in Rough finish surfaces of concrete complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Sheet glass 3mm thick ordinary quality and glazing with beading/oil putty in square n/exc 0.5 Sqm each pane complete all as specified and directed.
4mm thick figured glass pin head type ordinary quality and size and in any tyupe of frame and glazing with oil putty(or beading) in square n.exc 0.5 sq.m in each panes complete all as specified and directed.
Galvanised Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm, complete all as specified and as directed.
All as per Item above but as in repairs, complete all as specified and as directed
S&F Vitreous china wash down water closet (pedestal pattern), suitable for P or S trap white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed. Make- Cera cat No.- S1053101/02
S&F Plastic water closet seat, closet pattern with flat button and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in repairs , all as specified. Make- Cera cat No.- B1510105
S&F Vitreous china squalting pan, orissa pattern size 580 x 440 mm white with integral foot rests and fixed with cement concrete bedding complete all as per specified. (Fixed in Repair)
S&F PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe suitable for EWC or Orrisa WC etc., fixed in repairs,complete all as specified and directed. Make- Cera cat No.- B1010108
S&F Vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe ,fixed in repair complete all as specified.
S&F CP Towel Ring 200mm dia Fixed in repair complete all as specified and as directed by Engineer-in-Charge. Make-Jaquar, AQN-7721, Cera-F5007105.
S&F 20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges Fixed in repair complete all as specified and as directed. Make -Jaquar cat part no. CAN-1111NM,Cera- CA- F5003103
S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed. Make -Jaquar cat part no. AKP-35771P, Cera-CA-108
S&F Corner Glass self ( With CP brakets), as in repairs complete all as specified and as directed. Make-Jaquar cat part No. CAN-1173, Cera- F5005101.
S&F Single lever wall mixer, telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE. Jaquarcat part No. FUS-29281, Cera- CA- F3002404
S&F Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE. Make : Jaquar, Cat part No. SOL-6169B, Cera- F3002461.
S&F Hand shower (telephonic shower), chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed. Make: Jaquar-code HSH-1727,SHA-571, Cera-F7030502.
S&F Shower rose, brass, chromium plated, 125mm size with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed.
S&F Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.
S&F Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed. Make : Jaquar, Cera - F2002152 or equivalent as approved by GE
S&F Health faucet, brass, chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed.
S&F Jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed I repair complete all as specified and as directed. Make : Jaquar, Cera or equivalent as approved by GE
S&F PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.
S&F PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.
M&L for Stop valves, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed.
M&L for Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws, fixed in repair complete all as specified and directed.
M&L for CP brass grating 100mm dia, centre hole, fixed in repair complete all as specified and as directed.
M&L for CP brass grating 100mm dia, fixed in repair complete all as specified and as directed.
M&L for toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed.
M&L for sink wall mixture, brass, chromium plated, fancy type, with capstan head handles screwed down high pressure, with lettered 'hot' and 'cold', including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed.
M&L for pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with' long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, complete all as specified and as directed.
M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair)
M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed.(fixed in repair)
M&L for ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed. Make Parko cat part No 1527
M&L for 15 mm dia medium grade galvanised tubes with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.
All as per Serial Item above here-in-before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item).
M&L for steel water tubing, medium grade, 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.
All as per Serial Item above here-in-before but except tubing (Old serviceable tubing as retrieved vide item above shall be reused under this item).
M&L for cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, cutting exc 10cm and not exc 20 cm girth complete all as specified and directed.
M&L for 20 mm dia decorative MS powder coated drapry curtain rods of with bright finish,including decorative side domes, brackets complete all as specified and directed by Engineer In Charge.
M&L for Pressed steel frames for doors of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., supplied and fixed complete all as specified and directed.
M&L for pressed steel frames for doors of size 165mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
M&L for 35mm thick factory made flush shutter, solid core construction, with block board, core and plywood face panels, commercial type on both sides, complete all as specified and directed.
M&L for 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for door edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc 8.20 (a), complete all as specified and as directed.
M&L for 200mm Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed.
M&L for 250mm long mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
M&L for 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.
M&L for 150 mm size mild aluminium handles cast type anodised all complete all as specified and as directed.
S&F in repair 18 mm thick prelaminated medium density fibre (MDF) boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws as in shelves, etc, complete all as specified and directed.
S&F in repairs telescopic drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, for modular kitchen, complete all as specified for modular kitchen.
S&F in repairs stainless steel multipurpose basket in wooden drawers/partitions for storing rations of various types made of 3 to 4mm dia stainless steel rods, fixed in side partitions etc fixed, complete all as specified for modular kitchen.
S&F in repair stainless steel of 3 to 4mm dia luddle-craddle hanging stand for cutlery all as specified and directed by Engr-in-Charge for modular kitchen.
S&F in repair stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen, complete all as directed by Engr-in-Charge for modular kitchen.
M&L for Floor door stoper of Aluminium body and tongue anodised with land drawn steel spring overall length of cover plate 140mm fixed with screw complete all as specified and as directed.
M&L for mild steel 300mm long ordinary rat rail rod pattern spring including roller and roller plate, Fixed in repair complete as specified and directed.
M&L for refixing door/window wooden shutter of any description exc 1.00 Sqm and not exc 2.00 Sqm each in same opening after taking down,easing and adjusting and also refixing builders hardware as required; complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces and applying one coat of white wash on walls, complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces and applying one coat of white wash on ceiling, complete all as specified and directed.
M&L for complete removing existing treatment on walls surfaces by scraping down smoke soot, moulds moss & efflorences salts and trading oil & greasy spots,removing all mud,cake with steel wire brush and gunny bags from old plastered surfaces and applying two coats of distemper oil emulsion white or tinted over one coat of 1 to 1.20mm thick wall care putty over a coat of alkali resistance priming paint, complete all as specified and directed.
M&L for preparation of new plastered surfaces by using necessary filling compound of Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed.
M&L for preparation of old plastered or un-plastered surface by brooming down or steel wire brushing,scraping down smoke soot, moulds moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty and sand papering and applying one coat of distemper oil emulsion white or tinted, complete all as specified and directed.
M&L for preparation of plastered or un-plastered surface old decorative and washing down, brooming down or steel wire brushing, etc and applying one coats of cement base paint on walls, complete, all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed.
M&L for preparation of new plaster surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfaces complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces including scraping,removing all mud,cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using necessary filling compound of Altek/Birla white putty exterior grade to obtain smooth/even finish using sand paper and applying one coats of first quality exterior grade wheather proofing acrylic emulsion paint as per manufacturers instructions of any shade and colour over a coat of alkali resistant cement based priming paint complete all as specified and directed.
M&L for complete removing existing treatment including scraping,removing all mud,cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using necessary filling compound of Altek/Birla white putty exterior grade to obtain smooth/even finish using sand paper and applying two coats of first quality exterior grade wheather proofing acrylic emulsion paint as per manufacturers instructions of any shade and colour over a coat of alkali resistant cement based priming paint complete all as specified and directed.
M&L for preparation of old wooden painted surface not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted, complete all as specified and directed.
M&L for preparation of new wooden or untreated wood surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of old painted steel and iron surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed.
M/S PARDEEP KUMAR
anil construction co.
MADAN LAL SHARMA AND SONS
SATYA SALES AND BUILDERS
paras ram pachiala
JOGINDER SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .