Repair to AEEs Quarter including Construction of Gates of Irrigation Sub-Division Bawan.

Amount

Earthwork

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 mix

Providing and laying of dry stone soling

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts

Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement. 1:1½:3

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 mix

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete; Welded

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Removing white or colour wash by scraping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface

Finishing walls with textured exterior paint of required shade old work (two or more coats on existing cement paint applied @ 3.28Ltr / 10sqm

Providing and fixing Polyvinyl Chloride (PVC) pipes, including all fittings, bends and other accessories. This includes jointing of pipes and fittings as per direction of Engineer-in-charge. External work including trenching, refilling etc.75/100mm nominal outer dia pipes. (PRINCE)

Providing and fixing in position electrical fittings. (heating points) (including all accessories and wirings of standard make- Complete Job)

Providing and fixing in position electrical fittings. (lighting points) (including all accessories and wirings of standard make- Complete Job)

Procrument and fixing of Exhaust fans (including all accessories and wirings of standard make- Complete Job) 225mm x 225mm

Procrument and fixing of ceiling fans (including all accessories and wirings of standard make- Complete Job)

Providing and fixing 1 no. geyser of standard quality Jaquar/Venus 50 litres including all fixtures

Providing and fixing of Overhead water storage tank of capacity 1000 Ltrs including all accessories and fixtures

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

Providing and fixing brass stop cock of approved quality. 15 mm nominal bore

Supply and fixing of Mirror of superior make glass 60x45 cm

Providing and fixing soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing of Towel Rail (600 mm long)

Carriage of Materials by M.T

Stone Aggregate from an average lead of 15km MT

Sand from an average lead of 20km MT

Cement from with average lead of 6km MT

Soling stone and Quarry Stone with an average lead of 10km MT

Steel from with average lead of 6km MT

M/S REYAZ GULL DUGGA