SPECIAL REPAIRS TO ROOF 03 BAY OF BLDG No 107 OF FEME AT MCEME UNDER GE MCEME SECUNDERABAD

Amount

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mPa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 1.00 mm thick plain, galvanised, mild steel sheeting, in valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 gm/sqm, complete all as specified and directed.

Running welding, thickness of metal to be welded, n exc 6 mm, complete all as specified and directed.

S&F for Polycarbonate transperant corrugated sheeting 3 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall, etc., complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and provided and fixing new ones complete all as specified and directed.

M&L for rough cast, wired figured glass, 6.4mm thick, exc 0.5 sqm but not exc 0.75 sq m, and glazing with oil putty /glazing pins/spring clips etc in squares, etc complete all as specified and directed.

Demolition & breaking up of 150mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM complete all as specified and directed.

S&F 160 mm dia UPVC pipe (SCH-40), complete all as specified and directed.

S&F 160mm UPVC bends any radius complete all as specified and directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165 etc complete all as per specified and directed.

S&F rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to Fe410-W (Gde-E-250) quality-A, complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, etc complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm in width or girth applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of eaves gutter and pipes any description not exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) etc and applying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, including form work, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Taking down of cement plaster on brick or stone walls, ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface on wall, finished even and smooth without using extra cement, with water proofing compound, complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surface on wall, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of OBD over a coat of chalk whiting complete all as specified and directed.

M&L for preparation newly plastered surfaces of walls and applying two coat of cement based paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for prepration old surfaces of walls and apply one coat of cement base paint, complete all as specified and directed.

M&L for preparation of old surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

Supply only Integral water proofing compound

K LAKSHMAN SINGH AND CO

SHAH ENTERPRISES

Sri Associates

A SOMA RAJU

Anjana corporation

Vara Enterprises

Mavee Syndicate