Supply and Fixing of New Panchamirtha machines in the newly constructed Panchamirtha building in Arulmigu Subramaiya swamy tirukovil Tiruchendur

Cutting mixer machine Tilting Model. Specification : Motor : 3hp Three phase motor RPM : 2880 Rpm. Machine weight : 45 kg Fully stainless Steel

10" Pulverizer machine 5hp Three Phase Specification : Motor : 5hp Three Phase motor Production Capacity : 80 to 100kg/ hr

A)STEAM GENERATOR LPG - SUPPLYING & COMMISSIONINGOFSUPER BOILER It is operated by the useof fuel like firewood diesel & LPG. Boiler outer shell 8 mm MS Plate.Inner shelled & kid ring is made out of14 SWG 304 grade stainless steel sheet.It is has provision ONLY to fitaccessories viz., safety valve, pressure gauge and gauge glassset to knowing the water level in the boiler.Drainage valve is fitted in the boiler water inlets also provided.By pass gate valve is provided to outlet the steam in case of emergency mounted in the stand. Type of Boiler: SuperBoiler Dimension : 35”ODx50”Ht Over all Dimension : 12"Boiler Stand Height + 50"Boiler Outer Cell + 17" Boiler Inner Cell Top Head = 79" Ht SteamOutPut–70 Kg/Hr WaterCapacity–690Liters

B)LPG T78 (2 Nos) Burner settings for Boiler

C)Steam Line Fitting Materials for Boiler

D)1" SS 304 Grade steamline pipe for Boiler per Feet

F)SINGLE BURNER Frame:1¼” x¼”MS Angle Top & Cover : 16SWG &18 SWG 304 G SS Sheet Leg: 16 SWG 1 ½”304 G SS square tube With adjustable nylon boot Cast Iron Grate: ø16” Burners : G10 Dimension :24”x24”x20”Ht

A)ROTARY BOTTLE-FEEDING TABLE Circular rotating table for loading empty bottles. Driven by 0.5-HP capacity motor. Table diameter 900-mm. Provided at the beginning of the bottling line. Provided with side guides. SS construction except for the rotary plate that is in MS construction with SS cladding.

B) BOTTLINGLINE–2-Head • Bottle Conveyor: Required for automatic bottle movement. 4”-width Horizontal SS-Slat Chain conveyor driven by 1-HP capacity geared motor. With a set of pneumatically operated bottle locators for holding the bottle below the discharge valve of the piston filler.Conveyor length 8-ft.SS-304 construction. • Volumetric Piston Filler Model VPF-5-2H: Volumetric filling machine suitable for filling homogeneous & viscous products like ‘Abhishega Panchamirtham’. Twin head model for desired output. With common storage hopper of 100-l capacity. Capacity: 100-g to 500-g. Volume is infinitely variable in the above specified range. Pneumatically operated. Provided with specially designed discharge valve. •ControlSystem:Includes PLC based control system for synchronizing operations of various systems.

C)TRANSFER PUMP Progressive cavity pump suitable for lifting the product from G/L up to the hopper of the filling machine.Completewith piping up to the hopper of the filling machine. Without storage hopper. SS-304 Construction. Feeding capacity: 50-kg/min. Driven by 2-HP capacity 3-phase induction motor.

D)CONVEYORISED CAP SCREWING MACHINE Conveyorized capping machine suitable for screwing caps on pet bottles with precise application of torque. With infeed SS-Slat Chain Conveyor of 900-mm length & outgoing conveyor of 900-mm length.With indexing turret between the infeed & outgoing conveyor. With motorized cap screwing mechanism located on the side of the conveyor. Conveyorized bottle movement. Manual cap placement. With motorized cap screwing mechanism. Output up to 40- bottles/min. Includes PLC based control system.

E)INDUCTION CAP SEALING MACHINE Required for sealing pet bottles with aluminum foil using induction heating. Includes SS-slat chain conveyor of 1,200-mm length along with the induction sealing head. Maximum line speed900-mm per min.Sealing coil suitablefor cap diameter from 20-mm to 100-mm. Microprocessor controlled.

F)COLLECTION TABLE Circular rotating table driven by 0.5-HP capacity motor.Provided at the end of the line to receive filled bottles. Provided with side guides. SS construction except the rotary plate that is in MS construction with SS cladding.

A)1 NCF 54060 SIFDBK Nilkamal CIJ F540-60Si SSM/c and PH CONSIST OF NCF54060SI ( QTY 1.000 ) Continuous Inkjet Printer F540 NCFJ2710BK( QTY 1.000 ) Fast Dry Black Ink NCFJ270M (QTY2.000) PRINTING SOLVENT MAKE UP NCFJ270M NCF500CLEANSOL ( QTY 2.000 ) CLEANING SOLUTION 500 NCFJ2710BKWCC ( QTY 1.000 ) PRNTING INK FAST DRAY BLACK WITH OUT CHIP

B)NC CONVBLT 1500 X 300 Horizontal Flat Belt Conveyor

C)NKSES - III - 1030YEL

A) HSN CODE : 8514.40.00 GMP Model Sigma II NEO Compact Versatile Self Standing design–no mounting brackets or cart required Universal Sealing Coil Design :- 20 mm – 120 mm Sealing Head Height Indicator Castor wheels are provided to easy line change over Station pads are provided to locate & secure the location of the equipment Sealing Coil height movement350 mm LineSpeed120BPM MOC : S S 304 Micro Processor Controlled 100 % digital variable output Operation at ambient temperature Safety & Protection Features Protection against over voltage Protection against over Temperature Protection against over current

B) 4Ft SS Conveyor

A)ELGI make EQ series 7.5Hp screw compressor having 26.1cfm@ max working pressure 7.2 bar Model : EQ5-7

B)ELGI make 270 Ltr horizontal air receiver with connection kit to compressor Model : RECEIVER KIT EN53 V3 270L NON CE

C)ELGI make 40cfm refrigerant air dryer with connection kit to air receiver Model: DRYER KIT 270L ELGI 40CFM

D) ELGI make 41cfm capacity Pre filter suitable for above package Model :AF0041P-1/2"

E)ELGI make 41cfm capacity Fine filter suitable for above package Model : AF0041F-1/2"

F)Timer controlled auto drain valve suitable for above package Model : CTD11B

A)Visflow make wide Throat Progressive Cavity pump, Standard Accessories, Gear Motor, VFD with Panel Box Flow Rate 5 M^3/Hr

B)Visflow make wide Throat Progressive Cavity pump, Standard Accessories, Gear Motor, VFD with Panel Box Flow Rate 15 M^3/Hr

C)Visflow make wide Throat Progressive Cavity pump, Standard Accessories, Gear Motor, VFD with Panel Box Flow Rate 25 M^3/Hr

Gas pipe line work

A)Design, Fabrication and Supply of SS304 -1000 KG Trough type Blender with Dimple Jacket, heavy Ribbon agitator and VFD control panel

B)Design , Fabrication and supply of SS 304 Platform with stair step and hand rails for Blender.

C)Fabrication and supply of ss pallet – 1100 x 1100 x 80 ht with chequred plate

D)Design, Fabrication and Supply of 3KL Panjamirtham Jacketed tank with heavy spiral blade agitator and VFD control Panel & Ladder

E)SS Movable Trolley 4 ft x 4 ft with 8” x 3” Nylon wheel with SS Braket

F)SS Tray for material loading – 700 x 650 x 100 ht x 2 thk

G)Aluminum Banana can – 40 lts

H)Supply of SS 304 PIPE LINE INPUT AND OUTPUT and Piping and support at site

Construction of Additional Shed at back Side of Panchamitham Block

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers - Mixing by mechanical means

Brick work in following Cement Mortar using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 2894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing,

Brick partition walls of 11.50cm thickness using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Fabricating supplying and fixing in position M.S Steel framed door with weldmesh and fine wire mesh netting etc. with necessary locking facilities and hinges including cost of red oxide primer etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing solid core flush shutter of following type with thickness and necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 3 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm) , 2 Nos 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental

Supplying and fixing Countrywood frame with scantling above 2m for doors including labour charges for wrought and putup and fixing holdfast in frame etc., complete complying with standard specification and as directed by the departmental officers

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Please Enable Macros to View BoQ information