48/2025-26 Repair and Rewinding Of Submersible Pump Set And Monoblock Centrifugal Motor Pump Sets In Jen Section First Under Sub Div Dausa Rural

Repair Rewinding of Submersible motor includes full servicing and rewinding (wherever required) as per manufacturer's specification and to the satisfaction of Engineer Incharge. It includes the replacement of minor parts such as bushes (oil seal bush) Nut Bolts, washers, cable seal, gland ring, vent plug, water drain plug, etc. complete job

Above 3HP to 5 HP V-6

Above 5HP to 7.5 HP V-6

Above 7-5 HP to 10 HP V-6

Above 10 HP to 12.5 HP , V-6

Motor opening cable jointing & refitting charges when rewinding is not required. V-6

Providing & Replacement of G.M./S.S. Bushes for all types of motors (per set of 4Nos.) including cost of sleeves V-6

Providing & Replacement of thrust bearing for all types of motor. It includes cost of all components connected with thrust bearing. V-6

Replacement of thrust plate for all types of motors V-6

PART (B): SCHEDULE OF SPARES & REPAIR OF SUBMERSIBLE PUMP :

Supply and fixing spare parts for repair of pump set including cost of opening refitting, servicing, and machining, if required. It also includes the cost of nut bolt, studs, washer packing, keys etc. complete.

Providing & fixing of GM neck rings parts on impeller.

Plain Type V-6

Bowel typeV-6

Providing & Fixing of GM/SS bush per piece

Plain Type V-6

Bowel typeV-6

Providing & replacement of G.M. Impeller

Plain Type V-6

Bowel typeV-6

Providing & replacement of Nylon Impeller

Plain Type V-6

Bowel typeV-6

Providing & fixing Nylon Diffuser/ guide vans per piece V-6

Providing & fixing Microlone Guide per piece V-6

Pump opening & fixing including machining & all finishing work for desired performance

Plain Type V-6

Bowel typeV-6

Monoblock Pump Set

Rewinding of three phase squirrel cage induction motor of Monoblock pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge. 15.00 HP

SUPPLY & FIXING OF SPARE PARTS FOR MONOBLOCK PUMPSET (MOTOR + PUMP)

Connection Plates 10 HP to 20 HP

Cooling Fan 10 HP to 20 HP

GM/SS bush 10 HP to 20 HP

Mechanical reconditioning of Bearing sheet 10 HP to 20 HP

Mechanical reconditioning ofImpeller sheet and Key way slot 10 HP to 20 HP

Oil seal 10 HP to 20 HP

Labour charge for opening and fitting of pump sets 10 HP to 20 HP

Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (excluding cost of copper wire) 'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump sets and transportation to and fro from installation site complete as per direction of engineer in charge at site.

Above 25.00 HP but upto 30.00 HP

Above 45.00 HP but upto 50.00 HP

SUPPLY & FIXING OF SPARE PARTS HSC PUMP SETS (MOTOR + PUMP)

Connection Plates

20 HP to 30 HP

30 HP to 50 HP

Cooling Fan

20 HP to 30 HP

30 HP to 50 HP

Fan Cover

20 HP to 30 HP

30 HP to 50 HP

G.M./SS Gland Guide Bush

20 HP to 30 HP

30 HP to 50 HP

Shaft with Sleeve Chuck Nut

20 HP to 30 HP

30 HP to 50 HP

Shaft Chuck Nut

20 HP to 30 HP

30 HP to 50 HP

G.M. Neck Ring

20 HP to 30 HP

30 HP to 50 HP

Bush Shaft Sleeve of G.M.

20 HP to 30 HP

30 HP to 50 HP

G.M. Gland Cover

20 HP to 30 HP

30 HP to 50 HP

S.S. Shaft (Non Magnetic)

20 HP to 30 HP

30 HP to 50 HP

G.M. Shaft Sleeve Check Nut

20 HP to 30 HP

30 HP to 50 HP

M.S. Shaft Check Nut

20 HP to 30 HP

30 HP to 50 HP

Cooling pipe set with nozzle & Nut

20 HP to 30 HP

30 HP to 50 HP

AIR Cock

20 HP to 30 HP

30 HP to 50 HP

JOB WORK FOR REPAIR OF PUMP MOTOR

Bearing Housing (rebuilding, turning & finishing)

20 HP to 30 HP

30 HP to 50 HP

Bearing Cap (rebuilding, turning & finishing)

20 HP to 30 HP

30 HP to 50 HP

Impeller Reconditioning for all type of Pump

20 HP to 30 HP

30 HP to 50 HP

Labour Charges for Dismantling & Assembling of Pump

20 HP to 30 HP

30 HP to 50 HP

Coupling with stud and rubber bush

20 HP to 30 HP

30 HP to 50 HP

Supply & Fixing of tyre coupling sets according to relevant IS code in Centrifugal couple pump sets of approved make Unit. This job also included re-alignment of centrifugal couple pump set after fixing of tyre coupling set as per directed by Engineer-in charge. Type 14 Nos. set

Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification and approved make by EIC.

6306 or equivalent size

6307 or equivalent size

6308 or equivalent size

6309 or equivalent size

6310 or equivalent size

6311 or equivalent size

Routine maintenance of centrifugal coupled pump and motor including opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes & coupling nut & bolts for coupling pulley, tightening all nut & bolts of foundation, baseplate, pump & motor etc. Checking & correcting alignment of pump & motor including necessary materials i.e. grease, nut & bolts, studs, washers, gland packing and rubber bushes etc. work done at site complete job

20 HP to 30 HP

Above 30 HP and up to 50 HP

Cleaning of pump house by air blower/ vacuum cleaner or other means including removing of JALA from ceiling and walls etc. complete Job.

Cleaning of Electric Panel PMCC by air blower/vacuum cleaner or other means including tightening of loose connections etc. complete job.

Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut&bolts etc. complete job.

Above 20 HP and up to 30 HP

Above 30 HP and up to 50 HP

Please Enable Macros to View BoQ information