Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹82.5 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹97.0 L+₹10.3 L (11.9%)Rejected-Finance OFFICE NO 2 GROUND FLOOR CO OP HSG SOCIETY SBS ROAD COLABA MARKET MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹1.0 Cr+₹15.8 L (18.2%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹1.1 Cr+₹19.7 L (22.7%)Rejected-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹1.2 Cr+₹37.3 L (43.1%)Rejected-Finance T 16 1 SHETTY HOTEL OLD NAVY NAGAR COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹2.2 L
Closing Date
3 May 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) Navy Nagar, Colaba, Mumbai
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
REPAIR TO HARDSTANDING AT RS COLABA UNDER AGE BR II OF GE NW NAVY NAGAR COLABA MUMBAI
2023_MES_587636_1
8262/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Navy Nagar, Colaba
Class B and Category a(i)
8 documents required · 8 mandatory
₹1,000
GE NW NAVY NAGAR COLABA MUMBAI
₹2.2 L
Yes
1 Jul 2023
30 Mar 2023
4 May 2023
30 Mar 2023
3 May 2023
20 Apr 2023
30 Mar 2023 - 26 Apr 2023
Amount
Dismantling stone slabs and tiles of any description or thickness in floors, aprons and paving laid dry or laid bedded and pointed in any mortar etc complete all as specified and directed by Engr-in-charge.
Demolition of plain cement concrete of sub base, mass concrete etc like work in any position not exceeding 15 cm thick complete all as specified and directed by Engr-in-charge.
M&L for Hard core, broken to gauge n exc 63mm complete all as specified and directed by Engr-in-charge.
M&L for Cement concrete 1:3:6 (using 40mm graded stone aggregate) in sub base, plinth protection, mass concrete, Pavings, hardstanding etc complete all as specified and directed by Engr-in-charge.
M&L plain cement concrete 1:2:4 type B-2 (using 20mm graded stone aggregate) with RMC as in plinth protection, mass concrete , pavings, hard standing etc, laid in alternate bays/pannel, including brooming/ spike rolling while concrete is green complete all as specified and directed by Engr-in-charge.
M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type, any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand over and including 25mm (avg) thick sand cushioning complete all as specified and directed by Engr-in-charge.
M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-30 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand over and including 25mm (avg) thick sand cushioning complete all as specified and directed by Engr-in-charge.
S&F 25mm thick machine pressed prepolished precast plain cement concrete, coloured chequered tiles of any size (Colour, size and pattern shall be approved by GE) set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed by Engr-in-charge .
S & F matt finished vitrified paver tiles 400 x 400 x 15 to 20 mm thick exterior quality machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed.) Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately)
M&L screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying tiles complete all as specified and directed by Engr-in-charge.
M&L for Forming Construction (Dummy) joint 65mm deep x 10mm wide and filled with Grade 'A' sealing compound complete all as specified and directed by Engr-in-Charge.
Demolition of reinforced cement concerete of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-charge.
M&L for precast RCC slabs 1:2:4 type B1 (using 20mm graded stone aggregates) such as manhole cover and similar articles with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:4 complete all as specified and directed by Engr-in-charge.
M&L Mild steel TMT bars 6 to 8mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed by Engr-in-charge.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-charge.
M&L for precast cement concrete block masonary with solid block of grade (M-5) having block density not less than 1800 Kg/cum, exc. 10cm in width and setting in CM 1:6, complete all as specified and directed by Engr-in-charge.
M & L Brickwork with subclass ‘B’ bricks (old size) , straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.
M&L Plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping/kerbs including necessary form work including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-charge.
M & L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of wall finished surface fair and even complete all as specified and directed by Engr-in-charge.
S&F prefabricated cast iron work grade FG 150, unmachined in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors. dampers, stop valve boxes, baluusters and similar works (weight of each articles exceeding 5 kg) complete all as specified and directed by Engr-in-charge.
Taking down cement plaster of any description etc including raking out joints, hacking for key, scrubbing down with water, etc including removal of debris out side MD land complete all as specified and directed by Engr-in-charge.
M&L plastering 20mm thick in two coats 15 mm Backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 using WPC of approved make on Brick or concrete surfaces with recrene finish complete all as specified and directed by Engr-in-Charge. (WPC to be mixed in setting coat only and shall be measured & paid seperately)
Supply only integral water proofing compound of approved make as per ISI complete all as specified and directed by Engr-in-Charge.
M & L for preparing newly plastered or unplastered surfaces and applying two coats of acrylic based exterior paint over a coat of primer on walls complete all as specified and directed by Engr-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge.
S&F Framed work such as grills, gratings, railing etc, with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters, walk ways, railings; framework of water tanks and similar work confirming to Fe.290 Gde E-165 complete all as specified and directed by Engr-in-charge.
S & F Mild steel plates, plain or chequered, 5mm thick or over in for drain/manhole cover confirming to Fe 290 E 165 complete all as specified and directed by Engr-in-charge.
M & L Preparation of new steel surface and applying two coats of synthetic enamel paint ( Ordinary tint) over one coat of red oxide primer complete all as specified and directed by Engr-in-charge.
M & L for cleaning of steel surface with wire brush/gunny bag to retrived one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.
Dismantling of fencing posts fixed in concrete, brick work, masonry etc incl fencing of compound walls complete all as specified and directed by Engr-in-charge.
M&L MS Angle iron post or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mest etc) including all necessary drilling bolting or riverting etch and similar work confirming to /Fe 290 Gde E-165 complete all as specified and directed by Engr-in-charge.
Dismantling of fencing wire mesh, any type complete all as specified and directed by Engr-in-charge.
Supply only chain link fencing made out of 3.10mm dia and above galvanised iron wire of mesh any size, made into matters or cages straining and fixing to Posts complete all as specified and directed by Engr-in-charge.
Fixing only chainlink fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts,etc. including provision of binding wire complete all as specified and directed by Engr-in-charge. (Note :- MS Flat & MS bar to be measured & paid separately)
Removal of existing water proofing treatment of the roof, cleaning with wire brushes etc including demolition of PCC padding/ bricks bats of any thickness & any description in any position complete all as specified and directed by Engr-in-Charge. Note :- Work to be carried out above 14th floor.
M & L for Plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) addition and including WP+ 200 of UtraTech / Shali Plast LW+ of STP / Pidilite URP of Dr. Fixit or equivalent as appoved and per manufactures instruction Before laying concrete surface shall be cleaned and a bond coat of slurry with Shali Crete URP (of STP) or quivalent with cement to be applied. All cracks in slab to be openend in 'V' groove and filled with Shali Fix RMC a Polymer Morter of STP/ equivalent complete all as specified and directed by Engr-in-Charge. Note :- Work to be carried out above 14th floor.
M&L for 10mm thick rendering in CM 1:4 with the addition of Shaliplast LW+ @ 200ml per bag of cement on fair faces of brick or concrete surfaces complete all as specified and directed by Engr-in-Charge. Note :- Work to be carried out above 14th floor.
M&L for protecting the roof including parapet wall with water proofing coating complete as specified below : Supplying and applying high performance polyurea polyurethane elastomeric waterproofing coating cold applied by spray / brush, smart care ultron liquid membrane with an elongation of 600% and tensile strength of 12.6 N/sqmm as per ASTM D 2370, crack briding ability of 3mm as per ASTM C 1305, shore A hardness of min 75 as per ASTM D 2240. The system included final base preparation epoxy primer application and applying smart care ultron or approved equivalent in two coats at 1.2 Kg /Sqm each coat complete all as per manufacturer specifications and instructions including water proofing treatment to rain water spouts of entire roof terrace by opening of all the existing failed loose pipes and its joints (in old structure), replacing the same by an appropriate dia pipe (not less that 110mm) followed by application of two coats polymer polyurethane elestomeric water proofing coating to ensure leakage free joints (work included filling of mortar and making good the same). Make : Asian Paints / Berger Paints / Dulux Paints / STP / Dr. Fixit / Smart care. Note : 1) The colour of each coat shall be as directed by GE. 2) The work shall be carried out by authorised applicator only. 3) Work to be carried out above 14th floor.
M&L cleaning the existing surfaces of chequered tiles/paver blocks and applying two coats of floor guard paint over a coat of primer complete all as specified and directed by Engr-in-charge
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-charge.
Supply and Fixing in position Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddig to wall, fixed with self tapping screws or or J hook complete all as specified and directed.
Supply & fix barbed razor tape concertina coil hot dip galvanized spring tensile wire to particular here-in-after or other equivalent make as approved by GE of UTS 145 to 150 kg/mm^2 and Dia of coil when unstreched 600 mm having minimum number of circles 10/Rm, minimum number of clipes 25/RM and minimum weight of coil 1.625 Kg/Rm,hot dip galvanized razor ribbon tape of size 0.50mm thickness,19 mm width before wrapping on central core wire fixed with GI 1.66 mm clips and special nut bolts to hold two coils together and extra 2 rows parallel wire of 10 gauge tied by binding wire wherever complete all as specified and directed by Engr-in-Charge.
Removing demolished/excavated materials and debris laid at Navy Nagar outside MD land complete all as specified and directed by Engr-in-Charge. .
M/s. MAYUR ENTERPRISES
RAMESH ENTERPRISES
ASHOK CONSTRUCTION
Shetty Construction Co
RS Enterprises
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .