Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.7 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹32.5 L+₹1,933.05 (0.06%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹35.4 L+₹2.9 L (9.07%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L3 | Rejected-Finance NOT LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
13 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DEOLALI
HQ CWE DEOLALI, ONSLOW ROAD, DEOLALI (MH)
AS PER TENDER DOCUMENTS
2022_MES_563043_1
86871/E8
Open Tender
Civil Works
Item Rate
270 days
DEOLALI
AS PER NIT
7 documents required · 7 mandatory
₹500
Yes
GE DEOLALI
₹90,000
Yes
23 Jan 2023
14 Nov 2022
15 Dec 2022
14 Nov 2022
13 Dec 2022
29 Nov 2022
15 Nov 2022 - 23 Nov 2022
Amount
Demolition of brickwork of stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed.
M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.
All as per item above but except bricks complete all as specified and directed.
Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick plaster in cement mortar (1:6) on faces of brick work or concrete surfaces, finished with 1mm thick sagol finish complete all as specified and as directed.
M&L for rendering 15mm (in two layers 10mm+5mm) thick plaster in cement mortar (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 5mm thick plaster in cement mortar (1:3) on faces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed.
Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge.
M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed.
M&L for 1.50mm thick wall care putty on wall complete all as specified and as directed.
M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.
M&L for Preparation of new surfaces and applying two coats of exterior emulsion paint (light shade) @ 4.65 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 8.35 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed.
M&L for Glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in cement mortar (1:4) and pointed in coloured cement to match complete all as specified and directed.
M&L for 10mm thick (square/rectangular) Vitrified ceramic tiles dark shade double charged area of each tile exc 0.18 sqm not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
All as per item above but in skirting over 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed.
M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 but n exc 0.38 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
All as per item above but in skirting over 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed.
M&L glazed ceramic coloured tiles 300x200mm x 6-7mm thick over 10mm backing coat in cement mortar (1:4) jointed in neat cement slurry and pointed with coloured cement to match the surface complete all as specified. (Note : Work shall be executed in patches without damaging other undamaged portion, of any size as directed by Engr-in-Charge)
M&L non skid ceramic coloured tiles 300x300mm x 6-7mm thick over 15mm screed in cement mortar 1:6 jointed in neat cement slurry and pointed with coloured cement to match the surface complete all as specified. (Note : Work shall be executed in patches without damaging other undamaged portion, of any size as directed by Engr-in-Charge)
M&L for machine cut kota stone slab flooring 20-25mm thick (size 495mm x 495mm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed.
All as per item above but as in skirting over 10mm thick backing coat in cement mortar (1:4).
M&L for Machine cut kota stone slab on steps tread/riser/window cill in single piece of any size 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in cement mortar(1:6) complete all as specified and as directed.
M&L machine cut cudappa stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
M&L for chequered cement concrete tiles 30cmx30cmx20mm thick Rubber moulded with grey cement and pigment, over and including 15mm thick screed in cement mortar(1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.
M&L for precast cement concrete interlocking tiles 60mm thick Rubber moulded with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for 30mm thick PCC (1:2:4) Type B1 with 20mm graded stone aggregate as in levelling course in floor complete all as specified and as directed.
M&L for cement concrete (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.
Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work.
M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas.
Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
All as per item above but 6mm to 8mm dia.
M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for filleting, benching, coping, bed block, coving of chajjah top/junctions, padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work/moulds etc including applying cement slurry on surface area @2.50 Kg/Sqm complete all as specified and as directed .
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each.
Taking down steel frames with shutters (without taking off shutters from the frames) exc 4.0Sqm but n exc 10.0Sqm each and refixing in same opening after repairing of hold fast, bed block/wall etc complete all as specified and directed.
S&F for 35mm thick flush shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.
S&F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed.
S&F 2nd class HW shutters 35mm thick, plain framed panelled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and as directed.
S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed.
S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and as directed.
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with particle board core (stile:), with 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 5mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
S&F for Powder Coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc, complete as specified and as directed.
S & F powder coated sliding window, three track shutters, with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 4mm thick and stainless steel wire loth 0.36mm nominal dia of wire and average width of aperture 1.40mm size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and as directed.
S&F for powder coated aluminium ventilator shutters with frame not less than 0.60Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.
M&L for 4mm thick tinted sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in exc 0.5 sq.m in each pane in each pane complete all as specified and as directed.
M&L for 4mm thick figured glass, pin headed, fixed with glazing clips, rubber packing in square in n exc 0.5 sq.m in each pane in each pane complete all as specified and as directed.
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.
S&F in repair Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples from wooden windows and doors with wooden beading, and fixed with welding, riveting, screwing, nut bolts after cutting/removing of old steel flats in steel window and fixing same steel flats and complete all as specified and as directed..
Hacking out old broken glass from metal frame including punching or drilling out old glazing pins complete all as specified and directed.
M&L sheet glass 3.0mm thick ordinary quality and glazing with oil putty in steel window and wooden beading in wooden window/door, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed.
M&L for 3mm thick figured glass, pin headed, fixed with glazing clips, rubber packing in square in n exc 0.5 sq.m in each pane in each pane complete all as specified and as directed.
Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed
M&L for prelaminated particle board of 18/19mm thick, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination with teak wood leaping fixed with screws as in cupboard shutters of bed room, kitchen and internal shelves complete all as specified.
M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorate face veneers on one face; fixed with screws to timber frame work.
S&F width of flaps (When open) in 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised.
S&F hasp and staple aluminium anodished safety type with mild steel hinges pin incl bolt to hinge plate and fixed with screw 125mm size.
S&F for door/shutter catcher, magnetic stopper/holder with striking plate for wooden particle board cabinets, cupboard shutters complete all as specified.
S&F for brass knobs 35-40mm dia complete all as specified.
S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and as directed.
S&F aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed.
S&F in repair aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed.
S&F 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed.
S&F 75mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150mm size aluminium anodized handle complete all as specified and as directed.
S&F 75mm size aluminium anodized handle complete all as specified and as directed.
M&L for 250mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
S&F mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.
S&F in repair 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed..
S&F in repair 150mm size aluminium anodized handle complete all as specified and as directed.
S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.
M&L in repairs 250mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
M&L welding in repairs not exceeding 2.5 cm in length to the metal not exceeding 6mm thick complete all as specified and as directed.
S&F in repair Drapory rod 25mm dia alluminium alloy powder coated fixed with fancy type matching pair of bracket not less than 75 grams each fixed with screw complete all as specified and as directed.
S&F in repair 20 mm stainless steel curtain rod with fancy type fixing brackets, stops, rollers etc. complete all as specified and directed by Engr-in-charge.
S&F Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.
Fixing only in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm, complete all as specified and directed.
Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 250Ltrs and n exc 500Ltrs capacity complete all as specified.
Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 500Ltrs and n exc 100Ltrs capacity complete all as specified.
S&F in rep vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified.
Fixing only in repairs vitreous china wash down water closet pan (pedestal pattern), white including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed
S&F in repair plastic water closet seat for pedestal/semi pedestal closet pan, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete as fixed complete all as specified.
S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and as directed.
S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and as directed.
S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed
S&F in repair 15mm bore Bib tap fancy type, standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 105gms)
S&F in repair CP fancy type angle cock, cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and as directed.
S&F in repairs 15mm bore stop valves ,cast copper alloy, chromium plated with long shank and cup (concealed type) complete all as specified and as directed.
S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed..
S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position fixed in repairs complete all as specified.
S&F in repair stainless steel soap dish, approximate size 120x85mm complete all as specified and as directed.
S&F in repair fancy type Toilet paper holder, steel chromium plated approximate size 140X140X50mm complete all as specified and as directed.
S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and as directed.
S&F sheet glass corner wall mounted shelf assembly consisting of 8mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed.
S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges.
S&F in repairs 15mm bore two way mixing pillar/sink taps for mixing of hot/cold water or supply of fresh and cold water for WHB/Sink, chromium plated, fancy type with long screwed shanks complete all as specified and as directed.
S&F in repairs CP mixer for mixing (HOT/COLD) water , with wall cap of CP Brass, screwed down, screwd for iron pipes 15mm bore complete all as specified and directed.
S&F in repair 32mm dia PVC waste pipe for WHB/sink complete all as specified and as directed.
S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed.
Dismantling of water tanks (RCC hume Pipe/PVC) including disconnecting all connections etc. complete for following capacity of tanks .
S&F new rotational moulded polythylene water storage tank (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks :-
Hoisting & Refixing only old water tanks 500 ltr capacity
Hoisting & Refixing only old water tanks 1000 ltr capacity
Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.
Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors
Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors
S&F 15mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.
S&F in repair 15mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.
S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.
Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.
S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.
All as per item above but except pipe complete all as specified and directed.
S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.
All as per item above but except pipecomplete all as specified and directed
S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.
S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.
S&F forn110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
S&F forn75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repair 20mm bore ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Complete removal of existing treatment and applying three coats of white wash on surfaces of ceiling, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed.
Complete removal of existing treatment and applying three coats of white wash on surfaces of walls, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed.
Complete removal of existing treatment and applying two coats of oil emulsion distempering over a coat of interior wall primer over 1.5mm thick wall care putty, including removal of unnecessary nails and filling of holes/cracks by crack filler on surfaces of walls, complete all as specified and directed.
M&L for preparation of old painted wood and wood based surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint complete all as specified and as directed.
M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor upto 1.2 Sqm complete all as specified and as directed.
M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor/kitchen upto 0.5 Sqm complete all as specified and as directed.
M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, complete all as specified and as directed.
M&L for Preparation of old surfaces including crack filling with Smart Care textured crack filler, removing unnecessary nails and applying 02 coats of exterior emulsion paint (light shade) @ 4.65 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 8.35 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.
M&L for prepration of surface by cleaning to remove loose particles, dust, latance etc, cutting grooves again remove loose particles, dust, latance etc properly, filling cracks/damaged portions/hollow areas/gaps of RCC and masonary upto 15mm to 20mm widhth and 10mm to 15mm deep by using polymer modified cement mortars and making good surface like existing painted surface with the help of cement mortar and paint, all as specified and directed
M&L for prepration of preparation of New/old decorated plastered or unplastered surfaces of walls/chajjas by cleaning to remove loose particles, dust, latance etc., Filling of holes/Cracks with CNS filler material. Applying one priming coat of SMART CARE DAMP PROOF with thinner at the rate of 0.40 Ltr/Sqm (0.20Ltr Smart Damp Proof : 0.20Ltr Water). Applying second coat of SMART CARE DAMP PROOF after 05 to 06 Hrs at the rate of 0.40 Ltr/Sqm, and apply the third coat after 6 to 8 Hrs once the second coat is dry at the rate of 0.40 Ltr/Sqm all as directed and as per manufacturers instructions. Make : M/s Asian Paint/Berger/ Pidilite Industries Ltd/ STP Ltd./Choksey. Note : Cracks filler, Priming Coat and Damp Proofing coat used shall be of same Make/ Manufacturer. [Note : (i) All above maint work sites will be handed over in piece meal/patches in any qty and size for execution of the work without damaging the undamaged portion as per user requirement. (ii) For the emergancy work like water tanks, plumbing fittings etc which effects basic needs will be advanced procured by the contractor and fixed on emergancy basis on short notice please.]
S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
S&F in repairs stainless steel plate rack of size not less than 90cmx75cm fixed with stainless steel screw including taking out old unserviceable wooden plate rack as approved by GE complete all as specified.
M&L for plain fillets of second class hard wood, square, rectangular or triangular in section, wrought fixed on walls with nails having cross sectional area exceeding 13sqcm & not exceeding 25 sqcm complete all as specified & directed by EIC.
Demolition of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.
S&F for powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Main Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall conform to IS 733, IS 1285 with and including hangers of 3mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40X3 mm size 60mm long etc complete all as specified and directed .
M&L for 4mm thick non asbestos fibre cement building boards of make 'E Board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed .
Dismantling timber scantlings 40 sq. cm and over in section, in any position from unframed work as in roof members complete all as specified and as directed.
M&L second class hard wood clean swan, timber fixed in scantling of unframe roof work all as specified and directed.
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.
M&L for 6mm thick asbestos cement corrugated or semicorrugated sheets as in roof, wall coverings fixed with J/L type bolts or cranked hook bolts etc complete all as specified and directed.
All as per item above but except sheets. (Note: Serviceable sheets obtained from dismantling shall be reused.)
S&F 0.56mm thick plain aluminium sheeting alloy 31000H4 in ridges, hips valleys as in covering to doors etc all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based steel sheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.
S&F steel work (tubular/hollow) in trusses, rafters, beams, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as as directed.
Dismantling of single layer Mangalore pattern or similar tiles in roofing incl ridge/hip tiles etc complete all as specified and as directed
M&L for Mangalore pattern ridge / HIP tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in CM (1:6) complete all as specified and as directed
M&L for roof tile Mangalore pattern inter locking at side joints,laid dry complete all as specifed and directed.
All as per item above but except tiles.
Dismantling battens for tiles of any size spaced exc. 15cm of any description of any size incl tilting fillets, single if any complete all as specified and directed.
M&L for 2nd class HW, clean sawn, battens for tiles sectional area exc 5 and not exc 15 Sq.cm fixed at 30cm center to center complete all as specified and directed.
All as per item above but except battens
J Sams Contructions
Vinod Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .