8854 SPECIAL REPAIR TO SECURITY WALL AT MALAD COMPLEX OF UNDER GE NORTH MUMBAI

Amount

Demolition of brick work/stone/PCC block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches, not exceeding 1.50 m wide and not exceeding 1.5 m in depth, for foundation, laying of cable trenches etc. not exceeding 10 sq m on plan and getting out soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 3 described here-in-before but depth exceeding 1.5m but not exceeding 3.0m

Material and labour for Plain cement concrete 1:4:8, type D2, (using 40mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and as directed by Engineer-in-Charge.

Material and labour for hardcore broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

Material and labour for high strength deformed TMT bars 10mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per item No. 7 described here-in-before but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders

Material and labour for use and removal of steel formwork to foundations, footings, bases of columns and similar works etc for rough finished surface of concrete complete all as specified and as directed

Material and labour for use and removal of steel formwork to square / rectangular columns and similar works etc for rough finished surface of concrete complete all as specified and as directed

Material and labour for RCC M-30 Design mix using 20mm graded stone aggregate as in foundations, footings, plinth beams, bases of columns and similar works etc complete all as specified and as directed.

Material and labour for RCC M-30 Design mix using 20mm graded stone aggregate as in beams, columns and similar works etc complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces, finishing with even and smooth without using extra cement all as specified and as directed by Engineer-in-Charge

Material and labour for Preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed by Engineer-in-Charge. Make: Super Snowcem/Duracem/Aquacem/Shalimar/Berger

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Material and labour for mild steel framed brackets of angle or tees with web flanges cut to a shape, drilled and counter sunk for screw, including bending, welding, riveting etc confirming to Fe 290 Gde E-165 all as specified and as directed.

Material and labour for galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc as directed (each line of wire to be measured), complete all as specified and as directed by Engineer-in-Charge.

Material and labour for mild steel framed work such as grills, gratings, framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc., with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, and similar works confirming to FE 290 Gde E-165 all as specified and as directed.

Material and labour for preparing of new steel surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, tint as approved with all necessary staging, scaffolding, etc as required complete all as specified and directed by the Engineer- in - Charge. Make: Asian (Apcolite) / Berger (Luxol) / Nerolac

Material and labour for Plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping, bed plates, bond stones including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge.

Vishal Builders

M/s. JAY JYOTIRLING CONSTRUCTION CO