Loading
Loading…
Loading…
Tender Value
₹24.9 L
EMD Value
₹49,800
Closing Date
10 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER ELG
13 conditions · 4 needing a document upload
The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.
Scanned copy of valid GST (Goods & Service Tax)Registration Certificate.
The following documents should be attached with the tender ( Annexure-V (A) certificate is to be given by attorney/authorized signatory/each member of Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. & Scanned copy POA/Partnership deed is to be uploaded Duly filled up by the bidder
Partnership deeds, power of Attorney etc. (if any) : The tender shall clearly specify whether the tender is submitted on his own or on behalf of a partnership concern. If the tender is submitted on behalf of partnership concern he should submit the certified copy of the partnership deed along with the tender authorisation to sign the documents on behalf of the partnership firm. If these documents are not enclosed along with the tender document, the tender will be treated as hearing lease submitted by the individual signing the tender documents. The Railway will not consider any power of Attorney granted by the tender or any changes in the composition of the firm made subsequent to the execution of the contract. It may however recognize such power of Attorney and change after obtaining proper legal advice, the cost of which will be chargeable to the contract.(Scanned copy POA/Partnership deed is to be uploaded Duly filled up by the bidder. As per clause no. 14(e) of GCC'22, the following documents to be uploaded in terms of Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.
Scanned copy of valid Trade license or Propitorship Certificate.
List of the Works completed in the last three financial years giving description of work. Organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and date of payment and final value of contract should also be given. (Supportive documents/ certificates from the organization with whom worked/are working should be enclosed) (Please attach scanned copy of Annexure-I duly filled up).
List of works in hand indicating Supportive documents/certificates from the organization with whom worked/are working should be enclosed) description of work, contract value, approximate value of balance work yet to be done and date of award. (Supportive documents/certificates form the organization with whom worked/are working should be enclosed).(Please attach scanned copy of Annexure-IV duly filled up)
Railway Officers Associated with tenderer:RAILWAY OFFICERS ASSOCIATED WITH TENDERER 1. ExRailway Officer as tenderer: Should tenderer be a retired Gazetted Officer working before his retirement on any of the Railways owned and administered by the President of India, or should the tenderer being partnership firm have as one of its partners a retired Gazetted Officer as aforesaid, or should the tenderer being an incorporated company have any such retired Officer as one of its Directors, or should the tenderer have in his employment any retired Gazetted Officer as aforesaid, full information of such person shall be submitted along with his tender in the format given in annexure-VI to this chapter of this tender document. (Authority: ACS No.3 to GCC July,2014vide Boards letter No.2014/CEI/CT/O/9/RET dt.22.01.2015)(please attach scanned copy of Annexure-VI duly filled up by the firm).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Option for receiving payment through Letter of Credit . (Please attach scannedcopy of ANNEXURE 1 LC & ANNEXURE 2 LC duly filled up by the firm if optedfor)
The following documents should be attached with the tender: (i)Scanned copy of Pan Card. (ii)Scanned Copy of EFTMANDATE FORM Duly filled up by the bidder(iii)Tender Document (duly digitally signed by the bidder)
The Contractor/(firm) must go through the entire tender document along with all attachment for any kind of guidance regarding execution of the job & payment there after. In case any thing is left out or not clear then they should consult the General Condition of Contract & standard Specification as attached (uploaded ).The bidders are also advised to preserve a copy of entire tender document/ (Set) for their convenience.
Installation of Pump-motor set in connection with the work for Provision of deep Tube Well ( 200 mm x 150 mm ) Kamnara, Khetia, Chamardighi, Karjana Gram, Amarun including Chlorination Plant with standby boring at KAN and SKG station Under AEN/BWN.
EL-HWH-25-21-3300-R3~ER
EL-HWH-25-21-3300-R3
Open
Works - General
180 Days
Howrah, West Bengal
₹0
₹49,800
20 Aug 2026
20 Aug 2026
27 Aug 2026
61 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 24,88,991 | ||
| — | — | — | Above/ 138015.00 Below/P | ||
| Supply of energy efficient bore well submersible pump-motorset of pump discharge capacity approx. 1.00 LPS ( approx. 850 GPH ) and discharge head 54 mtrs. ( approx. 177 feet ) complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 1 Phase, 240 Volt, 50 Hz power supply system with stainless steel coupling and all other accessories such as suitable length 3 core flat copper conductor cable of size 1.5 sq.mm, 1100 Volt grade ( motor to starter panel ), total 30 mtrs. length 40 mm. dia heavy gauge GI column pipe, one non-return valve,two pairs erection clamps etc. alongwith one control panel consisting with MCB, single phase DOL starter, voltmeter, ammeter, water level indicator, LED indications etc.including installation, testing and commissioning.( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama )( Make of GI column pipe - Tata / Jindal / Bansal )( Make of Copper conductor cable - Anchor / KDK / Havells /Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 5.00 | — | — | |
| — | — | — | Above/ 52578.00 Below/P | ||
| Supply of energy efficient bore well submersible pump - motor set of pump discharge capacity approx.1.00 LPS ( approx. 850 GPH ) and discharge head 54 mtrs. ( approx. 177 feet ) complete with water cooled and water lubricated copper wire wound squirrel cage induction motor suitable for 1 Phase, 240 Volt, 50 Hz power supply system with stainless steel coupling and all other accessories suchas suitable length 3 core flat copper conductor cable ofsize 1.5 sq.mm, 1100 volt grade ( motor to starter panel ),total 30 mtrs length 40 mm dia heavy gauge GI column pipe, one non-return valve, two pairs erection clamps etc. alongwith one control panel consisting with MCB, single phase DOL starter, voltmeter, ammeter, water level indicator,LED indications etc.( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama )( Make of GI column pipe - Tata / Jindal / Bansal )( Make of Copper conductor cable - Anchor / KDK / Havells /Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 2.00 | — | — | |
| — | — | — | Above/ 2628.00 Below/P | ||
| Installation, testing and commissioning of Submersible Pump-Motor set ( 850 GPH ) and column pipe, supporting clamps and other accessories. | — | 2.00 | — | — | |
| — | — | — | Above/ 131862.00 Below/P | ||
| Supply of Submersible Pump Motor set in multistage construction of maximum discharge 2000 GPH at 55M head with AC induction motor of suitable capacity for operation on 3 Phase, 415V, 50Hz, AC supply system complete with all accessories such as suitable length of 3 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade (motor to starter panel), one flow meter, one delivery sluice valve one Non-Return Valve, onepressure gauge and all other accessories.( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama )( Make of Copper conductor cable - Anchor / KDK / Havells /Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 3.00 | — | — | |
| — | — | — | Above/ 12615.00 Below/P | ||
| Supply of Submersible Pump Controller in sheet steel enclosure incorporated with DOL Starter suitable for 4.5 KW / 6 HP, 3Ph,415V, 50Hz for 2000 GPH pump motor ( similar to L&T Type - MU-G6 DOL starter, Cat. No.- SS97756 or equivalent ). ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) | — | 3.00 | — | — | |
| — | — | — | Above/ 630.00 Below/P | ||
| Fixing, connection, testing and commissioning of aboveSubmersible Pump Controller with suitable arrangement. | — | 3.00 | — | — | |
| — | — | — | Above/ 4104.00 Below/P | ||
| Supply of heavy gauge GI pipe of dia 50mm with one end socket as per IS:1239 (Part I) of 1990 or latest.( Make - Tata / Jindal / Bansal ) | — | 18.00 | — | — | |
| — | — | — | Above/ 75336.00 Below/P | ||
| Supply of heavy gauge GI pipe of dia 65mm with one end socket as per IS:1239 (Part I) of 1990 or latest.( Make - Tata / Jindal / Bansal ) | — | 219.00 | — | — | |
| — | — | — | Above/ 149286.00 Below/P | ||
| Supply of Submersible Pump Motor set in multistage construction of maximum discharge 5000 GPH at 57M head with AC induction motor of suitable capacity for operation on 3 Phase, 415V, 50Hz, AC supply system complete with all accessories such as suitable length of 3 core flat PVC insulated flexible copper conductor cable of size 2.5 sq.mm, 1100V grade ( motor to starter panel ), one flow meter, one delivery sluice valve one Non-Return Valve, one pressure gauge and all other accessories. ( Make of pump-motor set - KSB / Texmo / CRI / Kirloskar / Crompton / Calama )( Make of Copper conductor cable - Anchor / KDK / Havells /Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab ) | — | 3.00 | — | — | |
| — | — | — | Above/ 17850.00 Below/P | ||
| Installation, testing and commissioning of Submersible Pump-Motor set ( 2000-5000 GPH ) and column pipe, supporting clamps and other accessories. | — | 6.00 | — | — | |
| — | — | — | Above/ 16869.00 Below/P | ||
| Supply of Submersible Pump Controller in sheet steel enclosure incorporated with DOL Starter suitable for 7.5 KW / 10 HP, 3Ph,415V, 50Hz for 5000 GPH pump motor ( similar to LK (L&T) Type - MU-G10 DOL Starter, Cat. No.- SS95983 or equivalent ). ( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / BCH / C&S ) | — | 3.00 | — | — | |
| — | — | — | Above/ 711.00 Below/P | ||
| Fixing, connection, testing and commissioning of above Submersible Pump Controller with suitable arrangement. | — | 3.00 | — | — | |
| — | — | — | Above/ 320000.00 Below/P | ||
| Trenching and laying of cable under ground by soil cutting with covering of cable through suitable dia HDPE pipe includingsupply of HDPE pipe (PE-100 grade, PN-10 or higher) alongwith refiling of trench by excavated soil and make good of surface asits original condition. ( Cable will be supplied by Railway ) | — | 2000.00 | — | — | |
| — | — | — | Above/ 21600.00 Below/P | ||
| Trenching, laying under road / track through 50 mm dia GIpipe ( medium gauge ) including supply of GI pipe and commi-ssioning of cable including back filling of trench with excavatedsoil after laying of cable ( Cable will be supplied by Railway ) | — | 100.00 | — | — | |
| — | — | — | Above/ 230000.00 Below/P | ||
| Trenching and laying of cable underground by pucca floor / concrete cutting and commissioning of cable alongwith make good of floor surface as its original condition after laying of cable( Cable will be supplied by Railway ) | — | 2500.00 | — | — | |
| — | — | — | Above/ 6450.00 Below/P | ||
| Drawing of cable on wall / structure with suitable size and shapeGI clamps including supply of suitable size GI Clamp and GI nut-bolts and commissioning of cable( Cable will be supplied by Railway ) | — | 150.00 | — | — | |
| — | — | — | Above/ 8630.00 Below/P | ||
| Drawing of cable through one no. 2" dia, 3.0 Mtrs. longGI pipe ( Make - Tata / Jindal / Bansal ) for protectionof cable on pole with proper GI clamps and GI nuts & boltsincluding supply of GI pipe( Cable will be supplied by Railway ) | — | 10.00 | — | — | |
| — | — | — | Above/ 17350.00 Below/P | ||
| Conceal wiring on wall/ceiling/floor through PVC pipe of suitablediameter for Light point / Fan point / Call Bell point / Indication point / Glow Sign point by two nos. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm,1100V grade for phase and neutral along with one no. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm., 1100V grade for Earth Continuity Conductor ( ECC ) including supply of cable, GI concealed boxwith modular cover plate, PVC pipe, junction / circular box, modular switch, ceiling rose and all other associated workalong with make good of wall surface as its original condition.( Make of Copper conductor cable - Anchor / KDK / Havells /Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )( Make of Modular switch, socket, box, cover plate etc. - ABB /Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) | — | 50.00 | — | — | |
| — | — | — | Above/ 5200.00 Below/P | ||
| Conceal wiring on wall/ceiling/floor through PVC pipe of suitablediameter for 6A/5 pin plug point by two nos. single core, HRFR /FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm, 1100V grade for phase and neutral along with one no. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 1.5 sq.mm., 1100V grade for Earth Continuity Conductor ( ECC ) including supply of cable, GIconcealed box with modular cover plate, PVC pipe, junction / circular box, modular switch, modular plug socket and all otherassociated work along with make good of wall surface as its original condition. ( Make of Copper conductor cable - Anchor / KDK / Havells /Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )( Make of Modular switch, socket, box, cover plate etc. - ABB /Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) | — | 20.00 | — | — | |
| — | — | — | Above/ 19500.00 Below/P | ||
| Conceal wiring on wall/ceiling/floor through PVC pipe of suitable diameter for Submain by two nos. single core, HRFR / FRLS grade, PVC insulated, copper conductor cable of size 4.0 sq.mm.,1100V grade for phase and neutral along with one no. single coreHRFR / FRLS grade, PVC insulated, copper conductor cable ofsize 2.5 sq.mm., 1100V grade for Earth Continuity conductor including supply of cable, GI concealed box with modular coverplate, PVC pipe and all other associated work along with makegood of wall surface as its original condition.( Make of Copper conductor cable - Anchor / KDK / Havells /Finolex / Gloster / KEI / Polycab / RR Kabel / Mescab )( Make of Modular switch, socket, box, cover plate etc. - ABB /Anchor ( Panasonic ) / Havells ( Crabtree ) / Legrand / LK (L&T) ) | — | 300.00 | — | — | |
| — | — | — | Above/ 1120.00 Below/P | ||
| Fixing, connection, testing and commissioning of indoor LEDluminaire fittings with suitable arrangement.( LED indoor light fitting will be supplied by Railway ) | — | 14.00 | — | — | |
| — | — | — | Above/ 784.00 Below/P | ||
| Fixing, connection, testing and commissioning of outdoor LED Flood light /Street Light luminaire fitting on High Mast Tower / pole with suitable arrangement.( LED Street light fitting will be supplied by Railway ) | — | 4.00 | — | — | |
| — | — | — | Above/ 3024.00 Below/P | ||
| Fixing, connection and commissioning of Street Light luminaire with suitable dia heavy gauge GI bend pipe with GI clamps madeof GI flat of size 40mm x 6mm and GI nut-bolts on structure / wall( LED Street light fitting will be supplied by Railway ) | — | 12.00 | — | — | |
| — | — | — | Above/ 384.00 Below/P | ||
| Fixing, connection and commissioning of BLDC Ceiling fan with suitable arrangement( BLDC Ceiling Fan will be supplied by Railway ) | — | 6.00 | — | — | |
| — | — | — | Above/ 7026.00 Below/P | ||
| Supply of SPN DB ( Metal Box), 6 way, 1Ph, 240V, 50 Hzcomplete with 4 nos. SP MCB of current rating from 6A to32A, 10kA, 240V, 50Hz as per requirement of load and 1 no. DP MCB of current rating 40A, 10 kA, 240V, 50 Hz( Make of MCB, MCB DP and Metal Distribution Board - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S / Havells ) | — | 6.00 | — | — | |
| — | — | — | Above/ 792.00 Below/P | ||
| Fixing, connection and commissioning of above SPN MCB DB with suitable arrangement including all incoming and outgoing cable connection with suitable cable termination arrangement. | — | 6.00 | — | — | |
| — | — | — | Above/ 51008.00 Below/P | ||
| Supply of MCCB with Thermal - Magnetic Release of breaking capacity 36 kA at 415V, AC 50Hz of capacity 25-32A / 32-40A /40-50A, 4 Pole complete with metal enclosure, including, fixing,connection, testing and commissioning.( Make - LK (L&T) / Siemens / ABB / Hager / Legrand / Schneider / C&S ) | — | 8.00 | — | — | |
| — | — | — | Above/ 16422.00 Below/P | ||
| Earthing with 2 nos.of 50 mm diametre, 3.0 metres long heavy gauge GI pipe ( Make - Tata / Jindal / Bansal ) including construction of earth pit and necessary earth connection from pit by suitable Galvanized Iron ( GI ) strip.( For details not covered in this specifications, IndianStandard Code of Practice for earthing IS : 3043 - 1987,Reaffirmed - 1996 should be followed ) | — | 6.00 | — | — | |
| — | — | — | Above/ 797540.00 Below/P | ||
| Design and supply of On-Grid connected Solar Photo Voltaic (PV)Plant without battery backup complete with the following items :(a) Mono Perc Half Cut Crystalline Silicon Solar Cell connected inseries (PV Module), (b) Solar Grid Connected String Inverter alongwith Data Logger, with provision for data transferring ( RS-485, Wifi,GPRS, RF ) to remote service platform for data storage and analysis displayed in various visual and grafical formats on Web-App & big screen display (c) Aluminium Solar PV Module Mounting Structure, (d) Array Junction Box, (e) Inverter InterfacingPanels ( AC Distribution Board , Grid Interfacing Panel ), (f) Fire resistant DC Cables and Fire resistant AC cables of suitable size( in sq.mm ) and length including dressing / laying of cable throughsuitable size GI covered cable tray / through HDPE Pipe / underground by Microtunneling method / through GI pipe as per site requirement for interconnecting panels, array Junction box andsolar inverter system, ACDB, GIP etc. including all other acce-ssories such as monkey ladder for maintenance access to roof / shed, lightning arrester, suitable earthing arrangement along with installation, testing and commissioning of above Solar Photo Voltaic Modules on roof top of building / Shed top of Station Platform / Coaching Yard / Workshop with all associated works. | — | 20.00 | — | — | |
| — | — | — | Above/ 379677.00 Below/P | ||
| Goods & Services Tax ( at present @ 18% ) | — | 1.00 | Lumpsum 379677.00 | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Advancecorrectionslipsupto11.pdf Advance Correction Slip
ATTACHMENT
TenderBooklet.pdf
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
GCC_April-2022.pdf
ATTACHMENT
TenderFormandAnnexuresnew.pdf Tender form and annexure
ATTACHMENT
HTLTstandardspecification.pdf
ATTACHMENT
3300-R3Clause.pdf
ATTACHMENT
RDSO.pdf
ATTACHMENT
Advancecorrectionslipsupto11.pdf
ATTACHMENT
TenderFormandAnnexuresnew.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].