Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹83.3 Laccepted-aoc | ₹83.3 L | accepted-aoc |
Tender Value
₹81.3 L
EMD Value
₹1.6 L
Closing Date
20 Feb 2026, 9:30 pmClosed
Public Works Department
Construction of Protection Wall at Land Sliding Portion Ch 3.90 Km of Hanbal - Devarunda Road Bettada Byraveshwara Temple Road Via Hodcahlli Maragunda in Sakleshpur Taluk
PWD/2025-26/RD/WORK_INDENT32893
PWD/2025-26/RD/WORK_INDENT32893
Open
Roads
PWD Division Office Hassan
7 documents required · 7 mandatory
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e., 2020-21,2021-22 , 2022-23, 2023-24, 2024-25 (b) Mandating Satisfactory completion as a prime contractor for at least one similar work to an extent of value not less than Rs. 40.70 Lakhs (Updated to 2025-26 Price Level) (usually not less than 50 percent cost of the work)
ITT Clause 3.2 (c) Executed in any one year i.e 2020-21,2021-22 , 2022-23, 2023-24, 2024-25 the following minimum quantities of work 1. Earth work/Subgrade/Embankment-2023.00 Cum, 2.Concrete Work (PCC/RCC)-347.00 Cum, 3. TMTSteel-24.30 MT (usually 80 percent of peak annual rate of construction)
ITT Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under : Assessed available tender capacity: (AxNx2.5 -B) should be greater than or equal to Rs.81.30 Lakhs where A-Maximum value of works executed in any one year during the last five years taking into account the completed as well as works in progress. (updated to 2025-26 price level) N-Number of years prescribed for completion of the works for which tenders are invited- 4 Months. B-Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 4 Months. (Period of completion of the works for which tenders are invited)
ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e.,2020-21,2021-22 , 2022-23, 2023-24, 2024-25 (a) achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 81.30 Lakhs (Updated to 2025-26 Price Level) (Usually not less than the estimated annual payments under this contract)
ITT Clause 3.3 Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of not less than Rs. 24.40 Lakhs (credit lines / letter of credit/ certificates from Nationalized banks) for meeting the fund requirement etc (usually 30percent of the amount of contract) (The fomat should be as per KW-3 Bid document Section-3 Para 1.10)
KPWD Class-III and above Registration Certificate
Contractors has to upload the EPF Registration
₹2,040
₹1.6 L
11 Feb 2026
11 Feb 2026
21 Feb 2026
17 Feb 2026
Construction of Protection Wall at Land Sliding Portion Ch 3.90 Km of Hanbal - Devarunda Road Bettada Byraveshwara Temple Road Via Hodcahlli Maragunda in Sakleshpur Taluk
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the fu...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...
Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...
Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...
Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion ...
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...
Providing and Fixing of Median Marker that are made of tough, high impact resistant, injection-molded, thermoplastic body with an isosceles trapezoidal structure of length, width...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Lot-1955 SDMF Skp.pdf
Others - Randomization Copy • 0.04 MB
KW-3 32893.docx
Tender Document • 0.95 MB
Download all tender documents and submit your bid