Establishment of Pasteurized Compost making Unit 35 MT at Allowpora Shopian under HADP Project promotion of round the Year Mushroom Cultivation 2025-26.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres All kinds of soil.

Providing and laying stone soling hand packed including carriage of the same from the approved source upto the site of work ,complete.

Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level. Including cost and carriage of material involved complete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost and carriage of material involved complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Including cost and carriage of material involved complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost and carriage of material involved complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and Shuttering (fresh kit ply) including strutting, propping etc and removal of form work including applying of shuttering oil for Foundations, footings, bases of columns etc. for mass concrete.

Centering and Shuttering (fresh kit ply) including strutting, propping etc and removal of form work including applying of shuttering oil for lintel beams, plinth beams, girders and cantilevers.

Centering and shuttering (fresh kit ply) including strutting, propping etc. and removal of form work including applying of shuttering oil for: suspended floors, roofs landings balconies and acess platforms

Centering and Shuttering (fresh kit ply) including strutting, propping etc and removal of form work including applying of shuttering oil for Edges of slabs and breakes in floors and walls

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) Including cost and carriage of material involved complete. Extra for bricx work woth common burnt clay bricks/ cement concrete bricks in superstructure above plinth level upto floor five level.

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing of Hi Rib colour coated sheets roofing 0.5 mm thick including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters.

Providing and Fixing of plain G.I sheets over ridges, Hips, Valleys including all fitting fixtures complete 60cm wide.

Providing wood work in frames of doors, windows , clerestory windows and other frames ,wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia and length (holdfasts lugs or with dash fasteners shall be paid for separately). Imported wood.

Providing and fixing 35mm panelled or panelled glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws excluding panelling which will be paid separately all complete as per direction of Engineer In-charge Imported wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.

Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. Imported wood all complete.

Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)

Modular door lock with dual looking system inside and outside of approved make as directed by Engineer In-Charge.

Providing and Fixing of 150mm modular tower bolts with nuts and screws etc. of approved make as as directed by Engineer In-Charge.

Providing and Fixing of 100mm modular tower bolts with nuts and screws etc. of approved make as as directed by Engineer In-Charge.

Providing and fixing ISI marked 85mm x 42mm oxidized MS pull Bolt lock conforming to IS :7534 with necessary screws ,bolts, nut, and washers etc, complete.

Providing and fixing 150mm ISI marked ornamental handles with necessary screws etc. approved make as directed by Engineer in charge

Providing and fixing 100 mm ISI marked oxidized MS handles conforming to IS:4992 with necessary screws etc complete.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

12mm Cement Plaster ( in fine sand) of mix 1:6 (1 cement: 6 fine sand).

6mm Cement Plaster ( in fine sand) to ceiling of mix 1:3 (1 cement: 3 fine sand).

Providing and fixing thermal insulation of ceiling (under deck insulation) with specified glass wool conforming to IS: 8183, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60cm c/c and wire mesh of 12.5mm x 24g wire for top most ceiling of building.With resin bonded fiber glass wool with density 24 kg/cum

Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by crisscrossing GI wire.With resin bonded fiber glass wool with density 16 kg/cum

Providing and fixing of wall panel 50mm thick (puff panel) and width 1 meter or more insulated with 0.50mm PPGI sheet both sides 40+2 Kg density, fixed on steel frame work with necessary screws etc. all as per thye directions of Engineer In Charge including all carriages complete.

Providing and laying of 100mm dia PVC pipes of Type-C with al accessories (spigots) required at site as per the directions of Engineer In Charge

Providing and fixing of reducer type PVC spigots ( reducing dia from 32mm to 25mm), inserted and solvent welded with 100mm dia PVC distribution pipes. The spigots shall be fixed at uniform spacing of 300mm centre to centre along the pipeline, ensuring leak proof joints. The work includes all cutting, drilling, fixing, necesary fittings, complete as per site requirements and direction of Engineer in Charge.

62mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 liter per 50kg of cement or as per manufacturer’s specifications, including cost of cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.

Cement Concrete Flooring in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20mm nominal size stone aggregate.

Providing and fixing of PVC conduit pipes with all fittings and fixtures.