PROVN OF CERTAIN REVENUE AND MINOR WORKS UNDER AGE B/R-II OF GE SATWARI

Amount

Excavating in post holes each not exc 0.50 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exc 25cm and removing surplus soil to a distance not exc 50m and making good surface all as specified`and directed .

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in any type of soil complete all as specified and directed.

Excavation in trenches in any type of soil, not exceeding 1.5m deep and 1.5m wide for foundation etc or manholes, piers , shafts etc not exceeding 10 Sqm on plan & not exceeding 1.5m in depth and getting out complete all as specified and directed.

Removing excavated material to a distance n. exc 50 m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.

S&F mild steel angle iron posts and struts, mild steel flat iron in fencing, including cutting tops to shape as directed, drilling holes, notching for wire etc,including all necessary drilling, bolting or riveting etc and similar works conforming to Fe-290 Gde E-165 quality including fixing of screw bolts,nuts & washers complete all as specified and directed .

Fixing only chain link fencing including line wires (steel wire), any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire compete all as specified and directed .

Supply only mild steel galvanized chain link fencing of any size or type complete all as specified and directed. Note: The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly and contractor shall have no claim on this account.

M&L for plain cement concrete 1:3:6,type C1(using 20mm graded crushed stone aggregates) as mass concrete,base for chain link fencing etc. including slightly rounded or chamfered angles complete all as specified and directed.

M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc for rough finished surfaces of concrete complete all as specified and directed.

S&F mild steel screw bolts having dia of neck 11 mm to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 10cm and n. exc 15 cm long complete all as specified and directed .

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line wire to be measured).complete all as specified and directed.

S&F mild steel round bars 10 mm dia, fixed to chain link fencing using 0.90 mm dia GI wire as strengthing bar conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F Concertina coil fencing with punched tape concertina coil 600 mm dia, streched to 6 meter length, having 50 Nos spiral turns per 6 meter length, spring core wire (2.59mm thick) of high tensile strength of 1620 N/sqmm with tape (0.52mm thick) hot dip galvanised upto 20 microns, weight of each coil 8.50 Kg and fixing the same in existing Y-shaped angle iron with 6 horizontal R.B.T. (Reinforced Barbed Tape) wire, stud tied with GI stape and G.I. clips to retain horizontal, clips shall be @ 5 Nos per 2 spiral turns (approximate 125 clips per coil) including necessary bolts complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8, type D2 (using 40 mm graded crushed stone aggregates) as in sub base , finished even and fair complete all as specified and directed.

M&L for providing and laying 80 mm thick factory made charmfered edge cement concrete paver block of M-30 grade of approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength , thickness & size/ shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for plain cement concrete 1:2:4 ,type B1(using 20mm graded crushed stone aggregates) as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies,benching,etc. including slightly rounded or chamfered angles including necessary form work complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L Providing precast cement concrete 1:2:4, type B1, (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for man holes cover) and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed .

M&L for rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed. Note:- Water proofing compound will be measured and paid separately

Supply only liquid water proofing compound

M&L for Concrete bed to drain pipes of dia 200mm in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipe after laid & tested including necessary formwork complete all as specified and directed.

M&L for reinforced concrete pipes class NP-2 laid and jointed complete with collar of size 200mm (internal dia) complete all as specified and directed.

M&L for TMT mild steel bars, 8 mm dia and above , as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed not less than 0.9mm dia) complete all as specified and directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia,in stirrups, spacers and binders including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Septic tanks complete for 50 users having excavation in any type of soil, PCC 1:2:4 as in foundation concrere, brick work with sub class 'B' bricks in cement mortar 1:4, including RCC precast cover slab embedded all around cover with angle iron frame, vent shaft and sludge chamber etc complete all per Drg No- CEPZ-TD/013/13) complete all as specified and directed.

M&L for soakage well of size 1.8 mtr dia x 3.0 mtr deep,having excavation in any type of soil, PCC 1:3:6 in foundation , brick work with sub class 'B' bricks in cement mortar 1:4 including honey coming as per drawing, RCC cover slab , filling with brick bats complete all per Drg No- CE/TD-1202/03, sheet no 1/2 & 2/2 complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ terrazzo dado from wall surface including cement mortar bedding, (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 8 to 9 mm thick vitrified ,light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed .

M&L for 8 to 9 mm thick vitrified ,light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed ..

M&L for plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in surface channel and drain including necessary form work complete all as specified and directed

M&L for extra for forming fair finish drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds mitred/topped ends etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and directed. .

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for granite work 16 to 18 mm thick any colour (table rubbed and polished) in steps, jambs , pillars, window cills , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite over and including 15 mm thick screed bed in cement mortar 1:6. complete all as specified and directed.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc for rough finished surfaces of concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed .

M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded crushed stone aggregates) as in column,pillars, piers and struts complete all as specified and directed.

S&F framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W (Gde E- 250) quality -A complete all as specified and directed.

Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit ,medium grade,of suitable size with all accessories such as bend, reducers, MS hooks including galvanised/pressed steel moduar terminal boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, stranded connected to common earth point dolly for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications.

All as per Srl item No 44. here-in-before but for one socket outlet, 3 Pin 5 Amps, 230 Volts on independent board complete all as specified and directed .

All as per Srl item No.44 here-in-before but for one three pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed

All as per Srl item No 44 here-in-before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed

S&F modular switch, one way 6 Amps , 1 module complete all as specified and directed .

S&F modular switch, one way 16 Amps , 1 module complete all as specified and directed .

S&F modular socket 3 pin, 6 Amps, 2 module complete all as specified and directed.

S&F modular socket 3 pin, 6 A/16 Amps, 2 module complete all as specified and directed .

S&F ceiling rose, surface backelite, two/ three terminal, 240 volts complete all as specified and directed .

S&F LED street light fitting 35 Watt, 230 V, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including street light bracket fabricated out of GI tubing, medium grade, 40mm bore, bend to the shape as directed and of length 1.2 mtr complete with mounting MS clamp made of flat iron 25 x 3 mm of suitable length including nuts, bolts etc of suitable size and painting of MS clamps with two coats of aluminum paint over one coat of red oxide primer complete all as specified and directed

S&F 5 mm thick acrylic LED light in english alhabet and logos to framing lighting sign board in colour on aluminium composite panel including wiring and necessary connections complete all as specified and directed.

S&F 5mm thick coloured aluminium composite panel , exterior grade fixed on mild steel framed structure including sealing of all joints using silicon sealant for installation of sign board letter complete all as specified and directed.

S&F structural steel work in tubular poles/trusses including special shaped washer etc complete using ERW or incuction butt welded tubes conforming to I.S. 1161-1998 grade St -240 complete all as specified and directed .

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium solid conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm 2 core nominal cross section in service connection complete all as specified and directed.

S&F MCB SPN, 40-63 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specified and directed .

S&F exhaust fan, steel body, AC single phase. 230 V of size 300 mm sweep with, blades and frame and louvers, hanging on wall with 4 Nos steel fasterners 10mm dia & 100mm long including wall hole and making good the disturbed surfaces as per existing complete all as specified & directed

M&L for cutting of wall of any thickness for fixing of exhaust fan of sweep 300 mm and making good the disturbed surfaces as per existing complete all as specified & directed

S&F electric water heater of capacity 25 litres,BEE 5 Star rated,storage type, steel body vertical type with glass lined /porcelain enamel coated steel inner tank and glass line double ceramic heating element upto 2 KW complete with all accessories such as safety valve,thermostate NRV,connection piece etc and fixing with 04 Nos nut bolt grouting in wall in PCC(1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed

S&F Galvanised steel tubing, 15mm bore, medium grade with all fittings, fixed to wall with clamps /ceiling and laid in floors complete all as specified and directed

S&F bib tap ,chromium plated, fancy type, cast copper alloy ,screwed down, screwed for 15 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F PVC connection 15 mm x 600 mm including PTMT check nut at both ends complete all as specified and directed.

S&F Socket Residual Current Device (SRCD) with steel enclosure including MCB,SPN 25 Amps,240 V, AC supply & plug top 15/16 Amps complete all as specified and directed.

S&F stop valve ,cast copper alloy , fancy type, chromium plated, screwed down for high pressure , screwed both ends for iron pipe of 15mm bore complete all as specified .

S&F MCB Single pole, 6 to 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed .

S&F in replacement Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 240 Volts,4 ways with 100 amps rated copper bus bar complete all as specified and directed

J P TECHNO (BID ID -3394429)

M/S S S Engineers (BID ID -3399475)