COMPLETION OF INCOMPLETE WORK FOR REPAIRS / REPLACEMENT TO UNSERVICEABLE CAST IRON / GI WATER PIPE LINES AND OTHER CONNECTED ACCESSORIES UNDER GE (WEST) COLABA

Amount

Excavation in trenches not exc 1.5 m wide and not exc1.5 m depth and getting out in soft/loose soil and levelling of bottom surface to required level, for laying water pipe lines all as specified and directed.

Demolition of PCC in floor/road cutting exc 1.5 m depth including making good as per existing surface all as specified and directed.

Returning and filling in including spreading, levelling, watering and well ramming in layers nexc 25 cm thick in soil obtained from excavation all as specified and directed.

Removing excavated material from site to a distance not exc 50 m away and depositing where directed at a level not exc 1.5 m above the starting point in soil all as specified and directed.

S&F in repairs cast iron fittings for pressure pipe, such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch, double branch, cross ( all sockets or socket and spigot) collars, caps and plugs of size upto 150mm bore all as specified and directed.

All as per item no 5 here in before but of size 200 mm to 300 mm bore.

S&F in repairs cast iron fittings for pressure flanged pipe, such as bends, tapers, tee pieces (single and double branch) and type and angle/radius and straight connecting pieces but all ends flanged of size upto 150 mm bore all as specified and directed.

All as per item No 7 here in before but of size 200 to 300 mm bore.

Taking up cast iron water mains (including all fittings), 80 mm bore pipes, class LA, with spigot and socket ends and lead/rubber tyton joints including burning out lead joints and recovering lead for reuse all as specified and directed.

All as per item No 9 here in before but 100mm bore

All as per item No 9 here in before but 150mm bore

All as per item No 9 here in before but 200mm bore

All as per item No 9 here in before but 250mm bore

All as per item No 9 here in before but 300mm bore

Material and labour for cast iron water mains, laid in trenches/on pillar supports, 80 mm bore pipes, with spigot and socket ends, centrifugally cast, class LA, in any length, suitable for rubber gasket joint or lead joint including jointing material all as specified and directed.

All as per item No 15 here in before but 100mm bore.

All as per item No 15 here in before but 150mm bore.

All as per item No 15 here in before but 200mm bore.

All as per item No 15 here in before but 250mm bore.

All as per item No 15 here in before but 300mm bore.

Taking up/down old unserviceable GI pipe 15 mm bore with all fittings from trenches / ducts / walls / floors / ceilings all as specified and directed.

All as per item No 21 here in before but 20mm bore

All as per item No 21 here in before but 25mm bore

All as per item No 21 here in before but 40 mm bore

All as per item No 21 here in before but 50 mm bore

All as per item No 21 here in before but 80 mm bore

Supply and fix GI pipes, medium grade, 15mm bore with all fittings and fixtures laid in trenches all as specified and directed

All as per item No 27 here in before but 20mm bore

All as per item No 27 here in before but 25mm bore

All as per item No 27 here in before but 40 mm bore

All as per item No 27 here in before but 50 mm bore

All as per item No 27 here in before but 80 mm bore

Supply and fix GI pipes, medium grade, 15mm bore with all fittings /GI bends fixed to wall/ducts and ceiling or laid in floors all as specified and directed

All as per item No 33 here in before but 20mm bore

All as per item No 33 here in before but 25mm bore

All as per item No 33 here in before but 40 mm bore

All as per item No 33 here in before but 50 mm bore

All as per item No 33 here in before but 80 mm bore

Supply and fix in repairs sluice valve (CI body with stainless steel spindle) ISI marked, size 100 mm bore pipes, PN 1.6 grade all as specified and directed.

All as per item No 39 here in before but 150mm bore

All as per item No 39 here in before but 200mm bore

All as per item No 39 here in before but 250mm bore

All as per item No 39 here in before but 300mm bore

Supply and fix in repair non return valve ISI mark of size 150mm bore, PN 1.6 grade all as specified and directed.

Labour only for run lead joint for using old lead retrieved from Item No 9 here-in-before but using new spun yarn, for 80 mm bore CI pipe all as specified and directed.

Labour only for run lead joint by using old lead retrieved from Item No 10 here-in-before but using new spun yarn, for 100 mm bore CI pipe all as specified and directed.

Labour only for run lead joint by using old lead retrieved from Item No 11 here-in-before but using new spun yarn, for 150 mm bore CI pipe all as specified and directed.

Labour only for run lead joint by using old lead retrieved from Item No 12 here-in-before but using new spun yarn, for 200 mm bore CI pipe all as specified and directed.

Labour only for run lead joint by using old lead retrieved from Item No 13 here-in-before but using new spun yarn, for 250 mm bore CI pipe all as specified and directed.

Labour only for run lead joint by using old lead retrieved from Item No 14 here-in-before but using new spun yarn, for 300 mm bore CI pipe all as specified and directed.

Materials and Labour for run lead joints including well caulking for spigot/socket CI water mains /CI specials including burning out lead joint leaking / unserviceable at in any position for 80mm bore size pipes/fitings all as specified and directed

All as per item No 51 here in before but 100mm bore

All as per item No 51 here in before but 150mm bore

All as per item No 51 here in before but 200mm bore

All as per item No 51 here in before but 250mm bore

All as per item No 51 here in before but 300mm bore

Materials and Labour for flanged joints with rubber or fibre board gasket of 3 mm thick , nut, bolt & washer of suitable size for CI flanged water mains, CI specials including dismantling of old flanged CI pipes/specials, for 100 mm bore pipe all as specified and directed.

All as per item No 57 here in before but 150mm bore

All as per item No 57 here in before but 200mm bore

All as per item No 57 here in before but 250mm bore

All as per item No 57 here in before but 300mm bore

Supply and fix in repairs Gun metal, globe or gate valve, 15 mm bore pipe with iron wheel head screwed both ends for iron pipe and fixed in existing pipeline and connecting up, leak proof all as specified and directed.

All as per item No 62 here in before but 20mm bore

All as per item No 62 here in before but 25mm bore

All as per item No 62 here in before but 40 mm bore

All as per item No 62 here in before but 50 mm bore

Dismantaling wrought iron or mild steel work of any description and in any position not otherwise provided for all as specified and directed

S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates etc, (cut to ordinary length of Fe 410-W-(Gde-E-250) quality-A, for fabricating, welding, fixing ladder of overhead water tanks, inclusive of one coat of epoxy primer and two coats of anti-corrosive epoxy paint etc including preparation of new steel surfaces all as specified and directed.

S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment inclusive of one primer coat, and two coats of anti-corrosive epoxy of paint all as specified and directed

Supply and filling sand gravel of size 5 mm to 40 mm filled in layers as per decreased size from bottom to upper level in media container all as specified and directed.

Supply and filling silica sand in filter media, container all as specified and directed.

Supply and filling activated carbon filter media all as specified and directed.

Supply and fix in repairs MS ERW pipe 150 mm bore IS 1239 of 2000 marked with and including flanged joint with nut and bolts, fibre gasket including provision of MS flanged 8 mm thick of suitable dia, duly drilled for bolts of hole dia as stated, threaded & welded to prepare as directed for joints all as specified and directed.

All as per item No 73 here in before but 200 mm bore

M&L PCC (1:2:4) type B2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete as in motor foundation, complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar or cement lime mortar including all quoins complete all as specified and directed.

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete at various locations in repair works complete all as specified and directed.

M&L renderting 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces all as specified and directed.

M&L for construction of valves pit chamber having internal dismension 90 cm x 60 cm x 90 cm (internal) using PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) for foundation 15 cms thick, 23 cm thick brick masonry wall built in CM (1:4), 10 mm thick rendering all around the brick work in CM 1:6 both internally and externally, PCC (1:2:4) type B1 coping (using 20mm graded crushed stone aggregate) for grouting MS frame including 3 mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement, MS frame made out of 40 x 40 x 6 mm thick angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m all as specified including demolition/ dismentling of existing valve chamber, all as specified and directed.

M&L for construction of valves pit chamber having internal dismention 100 cm x 100 cm x 90 cm (internal) using PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) for foundation 15 cms thick, 23 cm thick brick masonry wall in CM (1:4), 10 mm thick rendering all around the brick work in CM 1:6, PCC (1:2:4) type B1 coping (using 20mm graded crushed stone aggregate) for grouting MS frame including 3mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement, MS frame made out of 40 x 40 x 6 mm thick angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m all as specified including demolition/ dismentling of existing valve chamber all as specified and directed.

Anil Industrial Corporation

N.S.ENTERPRISES

M/s S.D Construction Co

Bidder Name

Anil Industrial Corporation

M/s S.D Construction Co

Panther Facilities

N.S.ENTERPRISES