Loading
Loading…
Loading…
Tender Value
₹16.6 L
EMD Value
₹33,200
Closing Date
9 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DRAWING
12 conditions · 1 needing a document upload
a) Electrical License: The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected. Note: In case of expiry of validity of license during contract, the contractor should renew the license so that it is always valid during contract).
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
Conversion of old KVS building into community Hall at Divisional office complex Nanded-Electrical Arrangements.
NED-E-09-2026-27
NED-E-09-2026-27
Open
Works - General
9 Months
Nanded, Maharashtra
₹0
₹33,200
9 Jul 2026
17 Jun 2026
25 Jun 2026
97 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 16,57,995 | ||
| — | 120.00 | — | — | ||
| Supply and fixing of 18 W LED round/square type slim light fittings conforming to specification. Make: Bajaj/Havells/Philips/Surya or similar | — | — | — | 1,60,920 | |
| — | 90.00 | — | — | ||
| Supply and fixing of 20 W LED Tube Light fittings conforming to specification Make: Havells/Syska /Crompton /Bajaj/Surya/Orient or similar | — | — | — | 35,010 | |
| — | 30.00 | — | — | ||
| Supply and fixing of 28W 1200 mm BLDC Ceiling Fan, BEE 5 star rated with remote control and all connected accessories conforming to class 1 of IS:374/1979 with amdts 1 to 6 including lobor charges. Make:Gorilla /Havells / CG/Bajaj/Orient or similar | — | — | — | 74,850 | |
| — | 5.00 | — | — | ||
| Supply and fixing of Ventilating Fans(Exhaust fan) of 4 pole 300 mm sweep size with metalic body with capacitor conforming to IS No.2312/67 (Reaffirmed 2005) complete with louver and all connected accessories. Make: Havells/CG/Bajaj/Khaitan or similar | — | — | — | 11,400 | |
| — | 20.00 | — | — | ||
| Supply and fixing of 40 W LED type weather proof street light fitting complete with all accessories and conforming to specification no. Make: Bajaj/Havells/ Philips/Surya or similar | — | — | — | 50,320 | |
| — | 6.00 | — | — | ||
| Supply and fixing of 30W 400 mm BLDC Wall Mounting Fan, Energy Efficient with remote control and all connected accessories conforming to class 1 of IS: 555/1979 with Amdts. including labor charges. Make: Gorilla/Havells/CG/Bajaj/Usha or similar | — | — | — | 19,740 | |
| — | 60.00 | — | — | ||
| Supply and fixing of 70W LED Medium Bay light fitting. | — | — | — | 2,17,500 | |
| — | 20.00 | — | — | ||
| Supply, fixing and connecting of 750 mm (30") sweep wall mounting air circulator with all connected accessories. Make :Crompton/Havells/Bajaj/ Usha or similar | — | — | — | 1,67,500 | |
| — | 20.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. Make: Legrand/Havells/GM/INDOASIAN or similar | — | — | — | 4,700 | |
| — | 26.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. Make: Legrand/Havells/ Schneider/GM/INDOASIAN or similar | — | — | — | 7,956 | |
| — | 10.00 | — | — | ||
| Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. Make: Legrand/Havells/ Schneider/GM/INDOASIAN or similar | — | — | — | 4,850 | |
| — | 60.00 | — | — | ||
| Supply and erection of modular type 5 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/GM/INDOASIAN or similar | — | — | — | 7,740 | |
| — | 200.00 | — | — | ||
| Supply and erection modular type switch 6/10A ISI mark approved make duly erectedon provided plate and box with wiring connections complete. Make:Legrand/Havells/GM /INDOASIAN or similar | — | — | — | 10,000 | |
| — | 8.00 | — | — | ||
| Supply and erection of modular type 3 pin 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells /GM/INDOASIAN or similar | — | — | — | 1,360 | |
| — | 8.00 | — | — | ||
| Supply and erection of modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/GM/INDOASIAN or similar | — | — | — | 776 | |
| — | 140.00 | — | — | ||
| Wiring points: Provision for wiring with two runs of 1.5 sq mm 1100 V and one run of flexible copper conductor 1.5 sq mm 1100 V PVC insulated wires (phase, neutral and earth) in the existing concealed PVC conduit pipe/casing and capping with 6A flush modular type switch control including 2 way switches where ever required, 3 pin ceiling rose and modular type plate cover to MS switch control box including all labour charges complete for fan points, light points, bell points, exhaust fans points etc. All the material used shall be of ISI approved make. | — | — | — | 65,800 | |
| — | 600.00 | — | — | ||
| Supplying & erecting mains with 2x4 sq.mm. and earth wire 2.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia, as per specification Make: Havells/Finolex/Polycab/Finecab or similar | — | — | — | 1,16,400 | |
| — | 200.00 | — | — | ||
| Supplying & erecting mains with 2x6 sq.mm. and earth wire 4 sq.mm FRLSH PVC copper wire, in HMS PVC conduit min.20 mm dia, as per specification. Make: Havells/Finolex/Polycab/Finecab or similar | — | — | — | 48,800 | |
| — | 6.00 | — | — | ||
| Supplying and erecting triple pole and neutral distribution board (TPNDB) with door surface/flush mounted with 4 ways for incoming and 12 ways for outgoing SP/TP MCB's on iron frame/laminated board as per specification No. SWSWR/ MCBDB Make: Legrand/Havells/L&T or similar | — | — | — | 15,072 | |
| — | 2.00 | — | — | ||
| Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB's on iron frame/laminated board as per specification No. SWSWR/ MCBDB Make: Legrand/Havells/L&T or similar | — | — | — | 3,246 | |
| — | 20.00 | — | — | ||
| Supply, erection and marking DP MCB 16-32A, 10 kA B/Cseries in provided distribution board as per specification No. SWSWR/ MCB Make: Legrand /Havells/L&T | — | — | — | 10,240 | |
| — | 40.00 | — | — | ||
| Supply, erection and marking SP MCB 16-32A, 10 kA B-series in provided distribution board as per specification No. SWSWR/ MCB Make: Legrand /Havells/L&T | — | — | — | 7,680 | |
| — | 2.00 | — | — | ||
| Supply, erection and marking 2P RCCB 32A, 30 mA in provided distribution board as per specification Make:Legrand/Havells/L&T orsimilar | — | — | — | 3,660 | |
| — | 4.00 | — | — | ||
| Supply, fixing testing and commissioning of 4 Pole MCCB 100A suitable for operation on 415V, 50 Hz 3Phase ACsupply in LT Panel with supply of all connected accessories and allied materials as per specification attached. Make:L&T/Legrand/Havells Or Similar. | — | — | — | 13,864 | |
| — | 2.00 | — | — | ||
| Supply, fixing testing and commissioning of 4 Pole MCCB 63A suitable for operation on 415V, 50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached. Make:L&T/Legrand/Havells Or Similar | — | — | — | 5,578 | |
| — | 100.00 | — | — | ||
| Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of cable trench 30cm wide x 90cm deep oad etc., for laying of HT/LT UG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly.Engineer. | — | — | — | 20,300 | |
| — | 50.00 | — | — | ||
| Supply and laying of ISI marked 4 core 50 sq mm cross linked polyethylene (XLPE)insulated LT UG cable, PVC outersheathed, armoured with galvanized round steel wire or steel strip and with aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988 witham dt. no. 1,2 & 3 (reaffirmed 2005) or latest. Make: Polycab/Finecab/Finolex/Kenter/Havells or similar | — | — | — | 14,900 | |
| — | 250.00 | — | — | ||
| Supply and running of 8 SWG GI wire is to be laid for earth continuity. | — | — | — | 3,000 | |
| — | 10.00 | — | — | ||
| Supply and erection of earth electrode as per the enclosed specification | — | — | — | 37,980 | |
| — | 50.00 | — | — | ||
| "Supply, erecting and laying of HDPE pipe of PE-80 grade in PN- 4 outer dia of HDPEpipe 63 mm (nearest 2"" dia) and wall thickness minimum 2.5 mm maximum 2.8mm with ""T' joints, bends, elbows etc.including all other connected accessories.Make: M/s.Sudhakar/ Nagarjunapolymer/Nandi/Plasto or similar | — | — | — | 6,200 | |
| — | 200.00 | — | — | ||
| Supply and laying of HDPE pipe of PE-80 grade in PN-4 outer dia of HDPE pipe 110mm (nearest 4"" dia) and wall thickness minimum 4.1 mm maximum 4.3mm with ""T' joints, bends, elbows etc.including all other connected accessories.Make: M/s.Sudhakar/ Nagarjunapolymer/Nandi/Plasto | — | — | — | 62,400 | |
| — | 150.00 | — | — | ||
| Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting,bending, drilling, welding, riveting etc.treated with anti-rust treatment and duly power coated as per the above specification. | — | — | — | 38,550 | |
| — | 30.00 | — | — | ||
| Supplying and erecting of any size electrolyte copper patti or bar in bus barchamber / in panel or any other purpose,500 V with require capacity with 99.9% copper purity with fixing arrangement(like lug or bottle type lug) to both theend with high grade polyolefin insulation sleeve complete. | — | — | — | 35,040 | |
| — | 2.00 | — | — | ||
| Supply and erection of 4-way Vertical Load line DB fitted with Busbars, Neutral Links and Blanking Plates suitable for 4 pole MCCB as incomer and 12 ways for MCBs as outgoing with all necessary material and labor complete. Make: L&T/Legrand/ Havells | — | — | — | 23,864 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release 160 A ; 4Pole, MCCB suitable for operation on 415V,50 Hz 3 Phase ACsupply in LT Panel with supply of all connected accessories and allied materials as per specification attached.Make: L&T/Legrand/Havells Or Similar | — | — | — | 35,078 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release 125 A ; 4Pole, MCCB suitable for operation on 415V,50 Hz 3 Phase AC supply in LT Panel with supply of all connected accessories and allied materials as per specification attached.Make: L&T/Legrand/Havells Or Similar | — | — | — | 28,394 | |
| — | 12.00 | — | — | ||
| Supply, fixing , connecting and commissioning of Master control 32A TPN MCB as per the direction of the Engineer at site. | — | — | — | 17,316 | |
| — | 200.00 | — | — | ||
| Supply,erecting, laying, connecting, testing and commissioning of 4core 70 mm² LT XLPE UG Aluminium Cable, 1100 Volts as per IS:7098/Pt.I/1988 or latest make:Polycab / KEI / Havells / Finecab / Finolex /Kenter/LS/Gloster. | — | — | — | 80,400 | |
| — | 70.00 | — | — | ||
| Supply, running and connecting of 4 core 16 sq mm PVC insulated and PVC round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for voltage grade 1100 Volt, Conforming to IS 694: 2010 or its latest amendments | — | — | — | 75,530 | |
| — | 150.00 | — | — | ||
| Supply ,erecting and laying of 4 core 10 sq mm copper cables XLPE insulated, cores laid up, PVC inner sheathed un armoured 650/1100V grade as per IS 7098(Part 1) 1988. | — | — | — | 69,900 | |
| — | 1.00 | — | — | ||
| Supply, fixing, connecting and commissioning of SMC cable termination junction box of size 250 x 200 x 105 with shock proof, rust proof, fire resistant, weather proof with IP65 protection suitable for termination of 2/4 core LT UG cables upto 70 sq.mm. 3 phase 415 V including hylam sheet, heavy duty terminal connections, clamping arrangements. | — | — | — | 5,301 | |
| — | 2.00 | — | — | ||
| Supply, erection, testingand commissioning of all material, excavation, and casting of cement concrete foundation/concreting in ratio 1:3:6 as per site condition and as directed by site engineer. | — | — | — | 12,014 | |
| — | 2.00 | — | — | ||
| Supplying and erecting selector switch suitable for voltmeter/ammeter for 3 phase AC supply 500/1000V, 50Hz, on provided box/ panel and duly connecting with necessary PVC wire leads and lugs. | — | — | — | 640 | |
| — | 2.00 | — | — | ||
| Supply & provision of 3 Nos RYB indication lamps of LED type including with all connected accessories complete. | — | — | — | 876 | |
| — | 6.00 | — | — | ||
| Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. | — | — | — | 5,268 | |
| — | 2.00 | — | — | ||
| Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.(suitable to operate on 500V) | — | — | — | 2,722 | |
| — | 2.00 | — | — | ||
| Supplying and erecting panel mounting type digital voltmeter having Three and half digit LED display, calibrated for 0-750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.(suitable to operate on 500V) | — | — | — | 2,610 | |
| — | 1.00 | — | — | ||
| Supply of Three Phase Prepaid meter System: - 3* 240VAC, 3 phase 4 wire Keypad based fully type tested, BIS (IS: 13779 & IS: 15884) Marked, 20-80 Amps. Base mounted direct current operate Prepaid Energy meter having Capacitive touch keypad, Calibration LED & Load controlling feature & provisions for TOD (Time of Day) tariff and R.T.C. (Real Time Clock). In a suitable tamper proof SMC type Box/ Poly carbonate box with a parallel Bluetooth Enabled Capacitive touch Freedom unit including 5 years Annual charges for Vending transaction . Warranty of meter should be 10 years Make:- Secure , L& T , HPL OR SIMILAR | — | — | — | 14,750 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC2022works.pdf
ATTACHMENT
GCCCorrectionSlips1to11_compressed.pdf
ATTACHMENT
Earth Pit Specification
ATTACHMENT
TB 09 202627 Conversion of old KVS
ATTACHMENT
TechCircular05-2022provisionofearthelectrodesearthing3_compressed.pdf
ATTACHMENT
TenderNo.NED-E-09-2026-27OldKVSintocommunityhall.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .